Home /
20A 220V AC Voltmeter Power Meter Ammeter Multimeter LCD Panel

20A 220V AC Voltmeter Power Meter Ammeter Multimeter LCD Panel

More Views

20A 220V AC Voltmeter Power Meter Ammeter Multimeter LCD Panel

34 products sold

PKR 1,750.00

Availability: Out of stock

Test voltage: 80-260V AC
Working frequency: 45-65Hz
The working voltage: 80-260V AC
Maximum power: 20A / 4400W
The measuring accuracy: Class 1
Threshold setting Watt range: 0-4.0kW
The coil / current transformer color:sent at random

Description

Details

Specification:

Test voltage: 80-260V AC
Working frequency: 45-65Hz
The working voltage: 80-260V AC
Maximum power: 20A /4400W
The measuring accuracy: Class 1
Threshold setting Watt range: 0-4.0kW
The coil / current transformer color:sent at random

Function:

Measurement and monitoring of electrical parameters (voltage, current, kwh, watts)
Overload alarm function (more than watt alarm threshold, backlight flashing)
Current alarm threshold Preset function (can set its own current alarm threshold)
Power (kwh) button Reset function
When the power is off, the data is stored when it is on, the date continues
Large LCD screen in full display function (voltage, current, kwh, watts)
Backlighting function

display:

Display interface. By the large LCD monitor voltage and current, kwh, watts, electrical parameters
1. Watts: the measuring range from 0-22kW
Less than 1 kW: 0.0-999.9W
Less than 10 kW: 1000-9999W
Less than 22 kW: 10.0-22.0kW
2. kwh: the measuring range of 0-9999kwh
Less than 10 kWh: 0-9999Wh
More than 10 kWh: 10-9999kwh
3. The test voltage range of 80-260v
Display format 80-220V
4. Current test area: 0-20A
Display format: 0.00-99.99A

Button:

Background lighting control
On / off can switch backlighting by briefly pressing
Power reset
Step 1: Press the button for 5 seconds, until the display flickers, then release the button
Step 2: Press the button again when the power (kwh) is reset to zero and no longer flicker
Step 3: If you press and hold the button for 5 seconds until it no longer flickers, power (kwh) does not erase data
Set the alarm (watts)
Step 1: Long press the button until the LCD screen display "SET CLR", release the button
Step 2: show the alarm (watts) value, press briefly, value (number) increase
Do not press the button for 3 seconds to set the setting switches to other bits
Step 3: long press the button (about 5 seconds) ----> the threshold to store the watts