Car Vehicle Bike Tools and Accessories
4S 40A Li-ion 18650 BMS PCM Battery Protection Board Balance Lipo Module 14.8V 16.8V buy in Pakistan
PKR 370
In stock
کسٹمر کو رقم ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے
| Weight | 0.013 kg |
|---|
On Sale Products
Related products
MOS Field Effect Transistor Trigger Switch Driver Board
SKU:
3207
In stock
Specification:
1: working voltage: DC 5V--36V;
2: trigger signal source: digital high and low level (DC3.3V--20V), can be connected to the microcontroller IO port, PLC interface, DC power supply, can receive PWM signal, the signal frequency 0--20KHZ perfect support.
3: output: DC DC 5V--36V, continuous current at room temperature 15A, power 400W! Auxiliary heat dissipation, the maximum current up to 30A.
4: application: the output can control high power equipment, motor, bulb, LED lamp belt, DC motor, micro pump, solenoid valve, etc., can enter the PWM, control motor speed, the brightness of the lamp, etc..
5: service life: unlimited switch; working temperature: -40 - 85 C; size: 3.4*1.7*1.2cm
3S BMS 12V 100A Li-ion LMO protection lithium battery circuit board li-polymer balance charging module
SKU:
2502
In stock
3S BMS 12V 100A Li-ion LMO protection lithium battery circuit board
li-polymer balance charging module
18650 battery charging module For lithium polymer protection board (3.7V)
Single cell battery overcharge protection voltage: 4.21-4.29V
Single cell battery overload protection recovery voltage: 4.14-4.24V
Overload protection delay: 1.5-2. 3S
Single cell battery over discharge protection voltage: 2.72-2.88V
Protection against current overload: 100 A
Over current protection: 100 A
Over discharge protection delay: 0.5-1. 3S
Temperature protect: Yes
Disconnect protect: Yes
Scarcity to protect: Yes
Shortage delay: 100-600 EE. USA
Scarcity Protection Recovery: Yes
Charging current: 60A
The current balance: Yes
Ampere (current): 60 mA
Voltage accuracy: 4.14-4.24V
2S 8A 7.4V 8.4V Lithium LiPo Cell Li-ion BMS Battery 18650 Protection Board Tool
SKU:
2717
In stock
2S 8A 7.4V 8.4V Lithium LiPo Cell Li-ion BMS Battery 18650 Protection Board Tool
Model: HX2SD01
Over voltage range: 4.25-4.35v?0.05v
Over discharge voltage range: 2.5-3.0v?0.05v
Limited current: 15A
Upper working current: 8A
Quiescent current: less than 10uA
Operating temperature: -40 - +50?
Storage conditions: -40 - +80?
Resistance: less than 300m ohm
Short circuit protection: protection, charge recovery
Usage: 2 string 7.4V lithium Lipo Li-ion 18650 battery phosphate rechargeable battery pack.
Stable performance.
4S 20A 14.8V 16.8V Li-ion Lithium 18650 Battery BMS PCM Protection PCB Board
SKU:
2657
In stock
4 series 18650 battery 16.8V 16V 14.8V
14.8V (Li-ion 18650 or li-ion battery rated voltage)
16.8V (full charge voltage of lithium ion battery)
14.4V (nominal voltage of Lipo battery pack)
4S LI-ION BMS parameters:
Overcharge voltage: 4.25-4.35v ? 0.05v
Upper discharge voltage: 2.3-3.0v ? 0.05v
Max. Working current: 10A
Max. Peak current: 20A
Operating temperature: -40 --- + 50
Storage temperature: -40- + 80
Small current: 6uA
Life Cycle: 50000 hours
Resistance: 45m?
TP4056 5V 1A 18650 TYPE-C USB lithium Battery Charger Module Charging Board With Protection
SKU:
2963
In stock
TP4056 5V 1A 18650 TYPE-C USB lithium Battery Charger Module Charging Board With Protection
Input voltage: 4.35-6V (recommended voltage 5v)
Charge cut-off voltage: 4.2V +/- 1%
Maximum load current output: 1000 ma
Battery overcharge protection voltage: 4.28V
Battery Overcharge Boost Voltage: 4.00V
Battery discharge protection voltage: 3.0V
Battery discharge termination voltage: 3.2V
Battery: current 3A overcurrent protection
Board size: about 2.5 * 1.65CM
Indicator light: without charging the light not bright, the red light to recharge, it is full of green light.
TP5000 4.2V/3.6V 1A Lithium Battery Charging Board Charger Module
SKU:
2825
In stock
TP5000 4.2V/3.6V 1A Lithium Battery Charging Board Charger Module
Features:Charging for Lithium battery(4.2V) and Lithium iron phosphate battery(3.6V)
Type:Voltage Regulator
Supply Voltage:DC 4.5-9V (not exceed 7V)
Model Number:TP5000 Lithium Battery Charger
Condition:New
Application:Electronic Circuit
Input voltage:DC 4.5-9V (not exceed 7V)
Output voltage:DC 4.2V/3.6V (default 4.2V)
Output current:1A (Default max)
LED Indicator:Charging -LED Flashing; Charged-Green
0.9V ~ 5V to 5V 600MA USB Output Charger Upgrade Module
SKU:
2087
In stock
Single Cell 18650 Lithium Battery Boost QC Fast Charge QC2.0 QC3.0 Module Board 3.7V 4.2V Convert 5V 9V 12V USB Mobile Phone Quick Charging
SKU:
2080
In stock
Single Cell Lithium Battery Boost Power Module Board 3.7V 4.2V Liter 5V 9V 12V USB Mobile Phone QC Fast Charge QC2.0 QC3.0
Product model: AILAVI-180312
Name: Single-cell lithium battery boost fast charging source module
Main control chip: TPS61088A
Identification chip: FP6601Q
Input voltage: 2.8 ~ 4.5V, very suitable for 3.7V polymer lithium battery
Output voltage: The default is 5V, triggering fast charge after 4.5V ~ 12V according to the protocol.
Input rated current: 8A
Output current: 5V3A, 9V2A, 12V2A. Output current is adaptive.
Output power: up to 24W.
Support Agreement: QC2.0, QC3.0, Huawei FCP, DCP Agreement
Efficiency is up to 93%, with a typical value of 90%.
Module size: 47.5 (length) * 16.5 (width) * 8 (height) mm (including USB)
Module net weight: about 7 grams
The FP6601Q chip integrates the HiSilicon fast charge protocol and Qualcomm QC2.0/3.0USB interface fast charge protocol, which can quickly charge devices that support FCP and QC2.0/3.0 protocols. In addition to supporting the USB BC1.2 standard, it also supports FOR Apple and FOR Samsung devices. The chip can automatically detect whether the currently connected device is a QC2.0/3.0 or FCP device to automatically adjust the voltage.
feature of product:
1. Support FCP voltage and current output protocol.
2. Support Qualcomm QC2.0/3.0 classA 5V, 9V, 12V voltage output.
3. Automatically recognize FCP and QC2.0/3.0 fast charge protocol.
4. Support the protocol equipment of Chinese telecom enterprise YD/T 1591.
The TPS61088 is a high power density, fully integrated boost converter with an 11m? power switch and a 13m? rectifier switch that provides an efficient, small form factor solution for portable systems. With a wide input voltage range of 2.7V to 12V, the TPS61088 supports applications with single or two-cell Li-Ion batteries. The device features 10A switching current capability and is capable of delivering output voltages up to 12.6V.
The TPS61088 uses an adaptive constant off-time peak current control topology to regulate the output voltage. The TPS61088 operates in PWM mode under medium to heavy load conditions. Under light load conditions, the device can select one of the following two modes of operation via the MODE pin. One is a PFM mode that increases efficiency; the other is a forced PWM mode that avoids application problems due to low switching frequency. The switching frequency in PWM mode can be adjusted from 200kHz to 2.2MHz with an external resistor. The TPS61088 also implements a programmable soft start function and an adjustable switching peak current limit. In addition, the device is available with 13.2V output overvoltage protection, cycle-by-cycle overcurrent protection, and thermal shutdown protection.
The TPS61088 is available in a 20-pin 4.50mm ? 3.50mm VQFN package.
1S 3.7V 3A LI-ION BMS PCM BATTERY PCB PROTECTION BOARD
SKU:
1864
In stock
4S 30A Li-ion Lithium Battery 18650 charger protection board PCB
SKU:
1551
In stock
The protective board can be used as the nominal voltage of 14.4V, 14.8V, 16.8V four series of polymer lithium battery group, four series of 18650 lithium batteries as overcharge and over discharge, short circuit protection. Without the activation function in the power application for high instantaneous current,and in inverter application for avoid false triggering protection.So it will use more convenient.
Note:No part design on the back, can be attached to the heat sink to ensure high current work situation for a long time.
134N3P Circuit Board Power-Bank Module 3.7V/4.2V/5V Protection Board Upgrade version
SKU:
1353
In stock
Power Bank Dual USB 5V 1A 2.1A Mobile 18650 Battery Charger PCB Power Module Accessories(No LCD)
SKU:
1167
In stock
Description
Features:
Balanced version 40A
Features:
4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 46 * 60 * 3.4mm (balanced version)
Product weight: 10.3g (balanced version)
Charging voltage: 16.8V – 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 40A
Equalization version: suitable for starting current below 80A, power 135W below the drill.
Package Included:
1PC 40A 4S PCB BMS li-ion lithium battery 18650 charger protection board For 4 Packs 18650 Li-ion lithium Battery Cells
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.