DC 12V Male Power Supply Jack Connector Cable Plug Cord Wire 5.5mm x 2.1mm

SKU: 2126

In stock

PKR  30
Brand: LUSTREON Transmission voltage:DC12V Length: approx. 24cm Inner diameter: 2.1mm External diameter: 5.5mm Material: copper wire Red for positive, black for negative Use for: Led Driver / Strip connector / CCTV CAMERA /Car camera Model Number: DC Power Male Plug

High Quality VGA Cable – 15 Pin – Male to Male – 1.5M

SKU: 2124

In stock

PKR  200
Type:Cable Interface Type:VGA Length:about 1.5m Connector B:VGA Connector A:VGA Connector Color:Gold Gender:Male-Male Application:Multimedia Main Color : Black Blue

1 X 9V Battery Connector Clip

SKU: 2120

In stock

PKR  25
Insulates and shields 9 Volt battery snap-on connector contacts Assures safe secure use, reduces the potential of short circuits and prevents tampering with battery contacts Red and black leads. For experiments or hobby applications.

BF350 3AA Foil Resistance Strain Gauge Sensor, Pressure Sensor

SKU: 2118

In stock

PKR  130
Type: BF350-3 AA Resistance: 350?(typ.) Grid Material:constantan Sensitivity Coefficient: 2.00-2.20 Sensitivity Coefficient Dispersion: ??1% Strain Limit: 2.0% Fatigue Lifetime: ?1M Board Size: 7.1 X 4.5mm/0.28 X 0.18inch(L*W)

17cm Universal Waterproof Car/Motorcycle COB white LED Strip Lights

SKU: 2104

In stock

PKR  199
Voltage: DC 12V Power: 6W Colour: Xennon White (6000K-6500K) Luminous Flux: 500lm Material: Aluminum + COB Housing color: Black Size: 17.3cm X 1.7cm X 0.3cm Latest COB Chips inside. Total Lumen increased 80% than traditional DRL light Aluminium alloy frame, High temperature tolerance Wider light angle

24V 1.0A Power Adapter 100-240V 50-60Hz

SKU: 2100

In stock

PKR  470
Product Manual: This AC to DC regulated switching power adapter converts 100-240VAC to 24VDC, at a maximum output of 1.0A (24W). Specifications: Input Voltage: 100-240 VAC, 50/60 Hz Output Voltage: 24 VDC Output Power (max.): 24 W Current, Full Load: 1.0 A DC Plug Outer Diameter: 5.5 mm DC Plug Inner Diameter: 2.5 mm (with spring clips) DC Plug Polarity: Center positive Color: Black Cord Length: 5ft/150cm DC side, 4ft/120cm AC side Dimensions: 4.9x2.1x1.2 in / 11?5.3?3.1 cm Compliance: UL, CE, FCC

Arduino KY-008 Laser Sensor Module 650nm 6mm 5V 5mW Red Dot Laser

SKU: 2090

In stock

PKR  90
Dot laser Operating voltage 5V Power 5Mw Wavelength 650n m OD 6mm 1 This 5V laser head very easy to use, do controllable laser pointer, theft detection, etc. interesting application devices. (2) Whenever the laser can not point to themselves or others eyes, even if the case is closed the laser will have to open the possibility of error. 3, the laser is not a toy, do not give children, mental insufficiency, for people who do not understand the use of the laser characteristics, in this case, can easily lead to injury. 4, the use of lasers should wear special goggles, for the invisible laser, this point is particularly important. 5, the laser can not shine in vehicles, aircraft and other transport vehicles someone.

0.9V ~ 5V to 5V 600MA USB Output Charger Upgrade Module

SKU: 2087

In stock

PKR  100
input voltage: 1-5V Output voltage: 5.1-5 .2 V Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input) Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)

IC Extractor Pickup BGA Chip Picker Patch IC Suck Pen Electronic Component

SKU: 2086

In stock

PKR  370
IC Extractor Pickup BGA Chip Picker Patch IC Suck Pen Electronic Component The grabber is made of precision casting alloy steel. Four-claw design, not easy to fall off when gripping tiny components and chip. Used to pick up IC chip components, make your repair work easily. Easy to use, just press the top then four claws appear. Ultra-precision processing makes it not easy to damage . It is a good helper for your piercing work. Material: Aluminum alloy steel Length: 120mm/4.72?(approx) Color: Deep blue&Black

UNI-T UT33C+ Digital Multimeter Handheld AC DC

SKU: 2078

In stock

PKR  3,050
module Name: UNI-T UT33C+ LCD Digital Multimeter Diode, Continuity (buzzer), hold, display with backlight (on / off button), low battery warning. General Features: Power: 9V battery. LCD size: 48mm x 16mm. Color: Gray and Red. Weight: 156g Dimensions: 130mm x 73.5mm x 35mm. Accessories: probes, battery, manual, thermocouple and plastic protector. Basic Functions: DC voltage: 200mV / 2000mV / 20V / 200V / 600V. AC voltage: 200V / 600V. DC current: 2000uA / 20mA / 200mA / 10A. Resistance: 200O / 2000O / 20KO / 200KO / 20MO. Temperature ?C: -40?C ~ 1000?C. Temperature ?F: -40?F ~ 1832?F.

90cm Probe Test Leads Pin For Digital Multimeter 10A

SKU: 2077

In stock

PKR  150
10A 90cm Probe Test Leads Pin For Digital Multimeter Meter Specification: Current : 10A Total length : 90cm Used for : All Digital Multimeter. Color : Red and black Universal, Super Pointed Thin, High Precision It can plug to Multimeter, Probes is very sharp, very suitable for IC pins, LED and small components.

90cm Probe Test Leads Pin For Digital Multimeter 10A

SKU: 2075

In stock

PKR  230
10A 90cm Probe Test Leads Pin For Digital Multimeter Meter Specification: Current : 10A Total length : 90cm Used for : All Digital Multimeter. Color : Red and black Universal, Super Pointed Thin, High Precision It can plug to Multimeter, Probes is very sharp, very suitable for IC pins, LED and small components.