WS16 6-30V Automation Cycle Delay Timer Control Support
SKU:
1713
In stock
1: Operating voltage: 6--30V, support microUSB 5.0V power supply
2: Trigger Source: Active-high (3.0V-24V), have optocoupler isolation, can improve the system's anti-jamming capability (customers can also shorting common ground).
3: Output capability: You can control the DC 30VDC 5A or 220VAC 5A device.
4: Quiescent Current: 20mA; Operating Current: 50mA
5: life: more than 10 million times; Working temperature: -40-85 ; Size:
6: with optocoupler isolation, enhanced anti-jamming capability, industrial grade board.
Special Note: The relay outputs are passive contact, just a switch.
4S 30A 14.8V Li-ion Lithium 18650 BMS PCM Battery Protection Board Balance Lipo Module
SKU:
1712
In stock
Over charge detection voltage: 4.28+ 0.05 V
Over charging voltage: 4.095-4.195V
Over discharge voltage: 2.55±0.08
Over charge detection delay time 0.1s
Temperature range -30-80
Short circuit detection delay time: 100ms
Over current detection delay time: 500 ms
Balanced current: 60mA
Working current: 30A
Over current: 60A
Short circuit protection function: there is, disconnect the load can be self recovery.
DS1302 RTC Real Time Clock Module
SKU:
1699
In stock
DS1302 main performance index
In The real time clock has The ability of calculating The prior to The 2100 second, minute, hour, day, week, month, year, and The ability to adjust a leap year
- Wide working voltage: 2.0 ~ 5.5 V
- When The working voltage is 2.0 V, The current is less than 300 na
- Read/write clock or RAM data have two transmission way: Single - byte/many bytes group
8 feet - 8 feet DIP the assembly or optional SOIC encapsulation "according to the surface of the assembly
PL2303 USB to UART TTL Cable Module 4p 4 pin RS232 Converter
SKU:
1689
In stock
GSM GPRS SMA Male Right Angle 10cm 433MHz Radio Antenna
SKU:
1685
In stock
DIP Switch Slide Type 2.54mm Pitch 2 Row DIP Toggle switches 6p
SKU:
1679
In stock
DIP Switch Slide Type Red 2.54mm Pitch 2 Row toggle DIP switches 6p
Product name: Dip switch;
Type: Dip;
features: 2 row
Pitch: 2. 54mm/0. 1'';
non-switching Rating: 100mA DC 50V;
switching Rating: 25mA DC 24V
Contact resistance: 50mω 24Vdc/100mA (at initial); 100mω typical, 24Vdc/100mA (after life test)
Material: plastic, electric parts;
DIP Switch Slide Type 2.54mm Pitch 2 Row DIP Toggle switches 10p
SKU:
1678
In stock
DIP Switch Slide Type Red 2.54mm Pitch 2 Row toggle DIP switches 6p
Product name: Dip switch;
Type: Dip;
features: 2 row
Pitch: 2. 54mm/0. 1'';
non-switching Rating: 100mA DC 50V;
switching Rating: 25mA DC 24V
Contact resistance: 50mω 24Vdc/100mA (at initial); 100mω typical, 24Vdc/100mA (after life test)
Material: plastic, electric parts;
color: red, GOLD Tone
Adhesive Car Cable Clips Cable Winder Organizer Wire Management Drop Cord Clamp Tie Fixer Holder Desk Wall mini
SKU:
1666
In stock
Applicable cable diameter: 0 - 3 mm (0 - 0.11 inch)
strong adhesive make it grip firmly
Self-adhesive, easy to use, creative approach is available as you like to utilize them
Cable organization: cable clip organizer attaches to a smooth surface firmly and help keep your place neat and organized, free from annoyance of mess wires, clean and tidy environment makes you at easefff
Adhesive Car Cable Clips Cable Winder Organizer Wire Management Drop Cord Clamp Tie Fixer Holder Desk Wall
SKU:
1665
In stock
Applicable cable diameter: 0 - 5 mm (0 - 0.2 inch)
strong adhesive make it grip firmly
Self-adhesive, easy to use, creative approach is available as you like to utilize them
Cable organization: cable clip organizer attaches to a smooth surface firmly and help keep your place neat and organized, free from annoyance of mess wires, clean and tidy environment makes you at easefff
1 Channel 5V Relay Module Low level for SCM Household Appliance Control For Arduino
SKU:
1655
In stock
signal input signal, the public end and will often start conduction;
can be used as a microcontroller development board module, can be used as a home appliance control;
dc or ac signal control, can control 220 v ac load;
and one often opened a normally closed contact;
blue KF301 terminal line more convenient.
MX1508 1.5A 2 way DC Motor Driver Module PWM Speed Dual H-Bridge Stepper L298N
SKU:
1640
In stock
Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
(L298N internal transistor switch, low efficiency, high fever, need to add heat sink, bulky, L298N very easy to burn).
Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped.
Small size, light weight, 0 standby current, is the ideal choice for your car model.
Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor.
The module supply voltage 2V-10V.
Signal input voltage 1.8-7V.
Single Operating current 1.5A, peak current up to 2.5A, low standby current (less than 0.1uA).
Built-in common conduction circuit, when the input pin is left floating, the motor does not malfunction.
Built-in thermal protection circuit with hysteresis effects (TSD), without worrying about motor stall.
Product Size: 24.7 * 21 * 5mm (length, width, height), ultra-small size.
The mounting hole diameter: 2 mm.