PL2303 USB to UART TTL Cable Module 4p 4 pin RS232 Converter in Pakistan

PKR  430

In stock

16 Products Sold in last 30 days


Last updated: 25 June, 2024
x

کسٹمر کو رقم ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے

SKU: 1689 Category:

Supports baud rate from 75 to 128000
Support Linux, Mac OS, WinCE and Windows (XP, Vista Win 7 inc 64 Bit Edition)
PL2303 USB to Serial Controller adopted
Cable length : 1 meter aprox
4 connecting wires, 2.54mm pitch type
Red Wire == VCC, (+5V)
Black Wire ==GND
Green Wire == TXD
White Wire == RXD

Description

PL2303 PL2303HX USB to UART TTL Cable module 4p 4 pin RS232 Converter

Item Description:

Supports baud rate from 75 to 128000
Support Linux, Mac OS, WinCE and Windows (XP, Vista Win 7 inc 64 Bit Edition)
PL2303 USB to Serial Controller adopted
Cable length : 1 meter aprox
4 connecting wires, 2.54mm pitch type
Red Wire == VCC, (+5V)
Black Wire ==GND
Green Wire == TXD
White Wire == RXD


Connection method: Brush requires only three lines, generally used only three signal lines RX TX GND, VCC.
Note: After setting 3.3V and 5.0V output (this is to the microcontroller power supply, no need to upgrade the machine)
please put the small plate unplug from the computer, set the jumper to take, do not charged to avoid damage to the device.

Package Included:

1PC  PL2303 USB TO TTL Serial Cable

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “PL2303 USB to UART TTL Cable Module 4p 4 pin RS232 Converter”

Your email address will not be published. Required fields are marked *

You have to be logged in to be able to add photos to your review.

PL2303 PL2303HX USB to UART TTL Cable module 4p 4 pin RS232 Converter

Item Description:

Supports baud rate from 75 to 128000
Support Linux, Mac OS, WinCE and Windows (XP, Vista Win 7 inc 64 Bit Edition)
PL2303 USB to Serial Controller adopted
Cable length : 1 meter aprox
4 connecting wires, 2.54mm pitch type
Red Wire == VCC, (+5V)
Black Wire ==GND
Green Wire == TXD
White Wire == RXD


Connection method: Brush requires only three lines, generally used only three signal lines RX TX GND, VCC.
Note: After setting 3.3V and 5.0V output (this is to the microcontroller power supply, no need to upgrade the machine)
please put the small plate unplug from the computer, set the jumper to take, do not charged to avoid damage to the device.

Package Included:

1PC  PL2303 USB TO TTL Serial Cable