Home » Electronic Components » Active Components

Showing 1–12 of 235 results

0.9V ~ 5V to 5V 600MA USB Output charger step up Power Module Mini DC-DC Boost Converter

SKU: 1093

In stock

PKR  220
input voltage: 1-5V Output voltage: 5.1-5 .2 V Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input) Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)

1 Channel 5V Relay Module Low level for SCM Household Appliance Control For Arduino

SKU: 1655

In stock

PKR  150
signal input signal, the public end and will often start conduction; can be used as a microcontroller development board module, can be used as a home appliance control; dc or ac signal control, can control 220 v ac load; and one often opened a normally closed contact; blue KF301 terminal line more convenient.

12 VOLT DC MOTORS – 12V DC

SKU: 2203

In stock

PKR  420
Speed: 350-5000 rpm Rated Torque: 1.1-12.0 in-lbs Output Power: .01-.21 hp Frame Sizes: 60, 80, 108 mm Brush card or replaceable brushes Standard brush life of 2000+ hours

12V 10A 5PIN SPDT RELAY

SKU: 1841

In stock

PKR  45
Switching capacity available by 10A in spite of small size design for highdensity P.C. board mounting technique. • UL,CUL,TUV recognized. • Selection of plastic material for high temperature and better chemical solution performance. • Sealed types available. • Simple relay magnetic circuit to meet low cost of mass production.

12V 6.5A Smart Compact Battery Charger High quality For Car, Motorcycle

SKU: 1720

In stock

PKR  950
220V TO 12V Converter Converter Helps to charge your battery for Car, Motorcycle, Truck etc. Input: AC 100-240 V, 50-60HZ Output: DC 12V 6.5A LED indicator: Green = charging.....Red = Battery full Short circuit protection (LED goes out, charging stops) Wrong connection protection (LED turns red, charging stops) Battery is full (LED turns red, charging stops)

12V 8A Switch Dimmer Brightness Adjustable Controller for DC motor LED Strip Light

SKU: 1189

In stock

PKR  470
Adjust the light soft and stable, no flickering PWM digital dimming, avoid rush current, protect your LED lights Mainly use to adjust single color LED light lamps and Led Strip

12V DC 1.1A Electric Lock Assembly big Solenoid Cabinet Drawer Door Lock

SKU: 2673

In stock

PKR  1,150
12V DC 1.1A Electric Lock Assembly Solenoid Cabinet Drawer Door Lock Voltage: DC 12V Current: 1.1A Energized Forms: Intermittent Magnetic Force: 0.3kg Unlocking Time: 1s Continuously Energized: ?20s Rated Stroke: 10mm Cable Length: 240mm Size: 55?42?29mm

12v Liquid Water Level Controller Sensor Module Water Tank full device off motor

SKU: 2214

In stock

PKR  950
This product is based on the actual needs of the family factories and pumping and the detection of the pool (water tower) to control the water level to achieve control. With a small, simple wiring, low power consumption, high switching capacity, interference is strong, functional stability characteristics. Automatically open when you can stably pool (water tower) water pump (solenoid) pumping,automatically stops the pump (solenoid) when full of water. Local flooding can also be used for automatic rain drainage, such as garages, basements, etc Material: Electronic Components The product does not need to buy another probe, using household wiring can replace probe

12V Smart Compact Battery Charger For Car, Motorcycle

SKU: 1488

In stock

PKR  1,350

220V TO 12V Converter
Converter Helps to charge your battery for Car, Motorcycle, Truck etc.
Input: AC 100-240 V, 50-60HZ
Output: DC 12V 1.30A
LED indicator: Green = charging.....Red = Battery full Short circuit protection (LED goes out, charging stops)
Wrong connection protection (LED turns red, charging stops)
Battery is full (LED turns red, charging stops)

16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module

SKU: 1969

In stock

PKR  1,200
5V compliant, and still talks to a 3.3V microcontroller. 6 “address select” pins for configuring up to 62 ICs on a single I2C bus PWM frequency adjustable up to approximately 1.6kHz 12-bit frequency resolution (equates to about 4µs resolution at 60Hz refresh rate) Configurable as push-pull or open-drain output Output enable pin available for outside-the-microcontroller “shut it down!” control.

16 Key 4×4 Membrane Switch Keypad 4*4 Matrix Array Smart Car keyboard for arduino Diy Kit

SKU: 2348

In stock

PKR  150
Contact resistance 500 () Insulation resistance 100 M Key FORCE OF 150-200N Bounce time 1 (MS) Life of 100 million (times) Operating temperature 60 () 1, the electronic characteristics Classification of the circuit: 35 V (DC), MA, 1 W Contact resistance: 10-500 (Varies according to lead lengths and is different from those of the material used) Insulation resistance: 100 M 100 V Dielectric strength: 250 VRms (50 ~ 60Hz 1 min) Electric shock jitter: <5 ms Service life: touch type: one million times 2, the mechanical properties Operating pressure: touch: 170-397g (6-14 oz) Travel switch: touch type: 0.6 ~ 1.5mm 3, environment parameters Operating temperature: -40 to + 80 Storage temperature: -40 to + 80 Temperature: 40.90% to 95%, 240 hours Vibration: 20G max (10 ~~ 200Hz Mil-SLD-202 M204. Condition B )

1602 LCD Board Keypad Shield Blue Backlight

SKU: 1562

In stock

PKR  570
1. This is a basic 16 character by 2 line black-on-green display. 2. Utilizes the extremely common HD44780 parallel interface chipset. 3. Interface code is freely available. 4. Blue Backlight with white words. 5. uses 4 Bit LCD Library. 6. Size:8cm x 5.9cm - 3.15inch x 2.32inch.