Home » Electronic Components » Battery Management System (BMS) Modules

Showing 1–12 of 40 results

5v Micro USB 1A TP4056 Charging Board Module

SKU: 1061
PKR  38
This linear charger board allows you to charge lipo battery using either a Mini Micro USB connector or a 4.5V - 5.5V input. Specifications: Red: Charging Green: Fully Charged Input Voltage: 4.5V - 5.5V Charge Voltage: 4.2V Charging Precision: 1.5% Dimensions: 22mm x 16mm

Tp4056 5V 1A Micro USB 18650 Lithium Dual Protection Battery Charging Module

SKU: 1094
PKR  45
Important reminder: the whole charging protection board has a protection function, if your battery protection board, before use, please remove the battery protection board, otherwise it may cause the trial is not normal.

TP4056 5V 1A 18650 TYPE-C USB lithium Battery Charger Module Charging Board With Protection

SKU: 2963
PKR  47
TP4056 5V 1A 18650 TYPE-C USB lithium Battery Charger Module Charging Board With Protection Input voltage: 4.35-6V (recommended voltage 5v) Charge cut-off voltage: 4.2V +/- 1% Maximum load current output: 1000 ma Battery overcharge protection voltage: 4.28V Battery Overcharge Boost Voltage: 4.00V Battery discharge protection voltage: 3.0V Battery discharge termination voltage: 3.2V Battery: current 3A overcurrent protection Board size: about 2.5 * 1.65CM Indicator light: without charging the light not bright, the red light to recharge, it is full of green light.

1S 3.7V 3A LI-ION BMS PCM BATTERY PCB PROTECTION BOARD

SKU: 1864
PKR  50
Over charge voltage: 4.25±0.05V Over charge release voltage:4.23±0.05V Over discharge voltage:2.54±0.1V Maximal continuous charging current: 2A Over current protection: 3A

3S 40A Lithium Li-ion Battery Charger Protection BMS Board Balanced Version

SKU: 2422
PKR  300
3S 12.6V 40A lithium battery protection board Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery) Product Size: 42 * 55 * 3.4mm ( Enhanced Version), 42 * 60 * 3.4mm (Balanced version) Product weight: 8.8g (enhanced version), 9.8g (balanced version) Charging voltage: 12.6V - 13.6V Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use) Continuous charge current (upper limit): 20A

HW-370 TP5100 Single Double 18650 Lithium Battery Charging Board 2A Charger Module

SKU: 2969
PKR  160
TP5100 Single/Double 18650 Lithium Battery Charging Board 2A Charger Module - Double 8.4v / 4.2v lithium rechargeable single - Programmable charge current. 0. 1A-2A - Programmable steady precharge current 10% -100%. - Wide operating voltage, maximum reach I8V - Red and green LED charge status indicator - Chip temperature protection, overcurrent protection, undervoltage protection - Battery temperature protection, reverse battery shutdown, short circuit protection - Switching frequency 400Khz, usable inductance 20uH and more - PWR_ON Power battery for switching control

20A 3s li-ion lithium battery 18650 charger 12.6V BMS protection board

SKU: 1555
PKR  220
Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries) Product Size: 64mmx20mmx3.4mm Material:Metal Charging voltage: 12.6V Maximum output current: 20A Maximum output power / charging power: 252W

DC 12V Ceiling Fan 8 Wire Circuit

SKU: 2621
PKR  830
DC Ceiling Fan Circuit Kit Circuit Type : Universal, 8 Wire Circuit, DC Power Wire, DC Circuit : Ceiling Fan, Best quality, Easy to Install

2S 8A 7.4V 8.4V Lithium LiPo Cell Li-ion BMS Battery 18650 Protection Board Tool

SKU: 2717
PKR  220
2S 8A 7.4V 8.4V Lithium LiPo Cell Li-ion BMS Battery 18650 Protection Board Tool Model: HX2SD01 Over voltage range: 4.25-4.35v?0.05v Over discharge voltage range: 2.5-3.0v?0.05v Limited current: 15A Upper working current: 8A Quiescent current: less than 10uA Operating temperature: -40 - +50? Storage conditions: -40 - +80? Resistance: less than 300m ohm Short circuit protection: protection, charge recovery Usage: 2 string 7.4V lithium Lipo Li-ion 18650 battery phosphate rechargeable battery pack. Stable performance.

4S 40A Li-ion 18650 BMS PCM Battery Protection Board Balance Lipo Module 14.8V 16.8V

SKU: 1967
PKR  370
4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery) Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery) Product Size: 46 * 60 * 3.4mm (balanced version) Product weight: 10.3g (balanced version) Charging voltage: 16.8V - 18.1V Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use) Continuous charge current (upper limit): 40A

10A 3s li-ion lithium battery 18650 12V BMS PCB protection board

SKU: 1825
PKR  180PKR  210
Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries) Product Size: 64mmx20mmx3.4mm Material:Metal Charging voltage: 12.6V Maximum output current: 10A Maximum output power / charging power: 252W

3S 25A Li-ion 18650 BMS PCM Battery Protection Board Balance Lipo Module

SKU: 1711
PKR  300
Over Charge voltage:4.25-4.35v±0.05v Over Discharge voltage: 2.3-3.0v±0.05v Max Working current:25A Max peak current:35-40A Working temperature:-40---+50 Storage Temperature:-40-- +80 Small current:50uA Life cycle:more then 30000 hours Resistance:Less than 100mΩ Short Cut : Protectable,Charge can repair