Home » Electronic Components » Battery Management System (BMS) Modules

Showing 1–12 of 40 results

5v Micro USB 1A TP4056 Charging Board Module

SKU: 1061
PKR  38
This linear charger board allows you to charge lipo battery using either a Mini Micro USB connector or a 4.5V - 5.5V input. Specifications: Red: Charging Green: Fully Charged Input Voltage: 4.5V - 5.5V Charge Voltage: 4.2V Charging Precision: 1.5% Dimensions: 22mm x 16mm

Tp4056 5V 1A Micro USB 18650 Lithium Dual Protection Battery Charging Module

SKU: 1094
PKR  45
Important reminder: the whole charging protection board has a protection function, if your battery protection board, before use, please remove the battery protection board, otherwise it may cause the trial is not normal.

TP4056 5V 1A 18650 TYPE-C USB lithium Battery Charger Module Charging Board With Protection

SKU: 2963
PKR  47
TP4056 5V 1A 18650 TYPE-C USB lithium Battery Charger Module Charging Board With Protection Input voltage: 4.35-6V (recommended voltage 5v) Charge cut-off voltage: 4.2V +/- 1% Maximum load current output: 1000 ma Battery overcharge protection voltage: 4.28V Battery Overcharge Boost Voltage: 4.00V Battery discharge protection voltage: 3.0V Battery discharge termination voltage: 3.2V Battery: current 3A overcurrent protection Board size: about 2.5 * 1.65CM Indicator light: without charging the light not bright, the red light to recharge, it is full of green light.

1S 3.7V 3A LI-ION BMS PCM BATTERY PCB PROTECTION BOARD

SKU: 1864
PKR  50
Over charge voltage: 4.25±0.05V Over charge release voltage:4.23±0.05V Over discharge voltage:2.54±0.1V Maximal continuous charging current: 2A Over current protection: 3A

1S 3A 3.7V Li-ion BMS PCM Protection Board for 18650 Lithium Lion Battery

SKU: 1814
PKR  70
Over charge voltage: 4.25±0.05V Over charge release voltage:4.23±0.05V Over discharge voltage:2.54±0.1V Maximal continuous charging current: 2A Maximal continuous Discharging current: 2A Over current protection: 3A The main function: Overcharge protection, over discharge protection, short circuit protection, over current protection.

134N3P Circuit Board Power-Bank Module 3.7V/4.2V/5V Protection Board Upgrade version

SKU: 1353
PKR  90
1.Input Voltage:3.7V~5.5V 2.Charging Current:1A(max) 3.Output Current:1A(max) 4.Output voltage:5V 5.BAT Discharging Stop Voltage:2.9V 6.Discharging Efficiency:85%(input 3.7V output 5V/1A)

0.9V ~ 5V to 5V 600MA USB Output Charger Upgrade Module

SKU: 2087
PKR  100
input voltage: 1-5V Output voltage: 5.1-5 .2 V Output Current: Rated 1A-1.5A (single lithium input), the maximum 1.5A (single lithium input) Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency)

2S 3A Li-ion Lithium Battery 7.4v 8.4V 18650 Charger Protection PCB bms pcm

SKU: 1350
PKR  110
high-accuracy voltage detection circuit terminal of the charger using high voltage device Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit) MOS transistor can control the battery charge and discharge low standby current consumption

TP5000 4.2V/3.6V 1A Lithium Battery Charging Board Charger Module

SKU: 2825
PKR  160
TP5000 4.2V/3.6V 1A Lithium Battery Charging Board Charger Module Features:Charging for Lithium battery(4.2V) and Lithium iron phosphate battery(3.6V) Type:Voltage Regulator Supply Voltage:DC 4.5-9V (not exceed 7V) Model Number:TP5000 Lithium Battery Charger Condition:New Application:Electronic Circuit Input voltage:DC 4.5-9V (not exceed 7V) Output voltage:DC 4.2V/3.6V (default 4.2V) Output current:1A (Default max) LED Indicator:Charging -LED Flashing; Charged-Green

HW-370 TP5100 Single Double 18650 Lithium Battery Charging Board 2A Charger Module

SKU: 2969
PKR  160
TP5100 Single/Double 18650 Lithium Battery Charging Board 2A Charger Module - Double 8.4v / 4.2v lithium rechargeable single - Programmable charge current. 0. 1A-2A - Programmable steady precharge current 10% -100%. - Wide operating voltage, maximum reach I8V - Red and green LED charge status indicator - Chip temperature protection, overcurrent protection, undervoltage protection - Battery temperature protection, reverse battery shutdown, short circuit protection - Switching frequency 400Khz, usable inductance 20uH and more - PWR_ON Power battery for switching control

10A 3s li-ion lithium battery 18650 12V BMS PCB protection board

SKU: 1825
PKR  180PKR  210
Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries) Product Size: 64mmx20mmx3.4mm Material:Metal Charging voltage: 12.6V Maximum output current: 10A Maximum output power / charging power: 252W

HW-357 3.7V 9V 5V boost module and TP4056 Charging Module for 18650

SKU: 2594
PKR  180
HW-357 3.7V 9V 5V PCB Adjustable Step Up 18650 Lithium Ion Battery Charging Discharge Power Bank Charger Module Input voltage: DC4.5-8V Output voltage: DC4.3V-27V (anti-clockwise rotary positioner) Output current: 2A max. Charging voltage 4.2V, charging current 1A Packing weight: 5g