Car Vehicle Bike Tools and Accessories
DC 100V 50A Red Blue Digital Voltmeter Ammeter 2 in1 DC Volt Amp Meter With Shunt
SKU:
1746
In stock
Operating voltage:DC 4 ~ 30V
Measure voltage: DC 0 ~ 100V
Minimum resolution(V): 0.1V
Measure current :50A (require external shunt)
Minimum resolution(A): 0.1A
Operating current: <20mA
Display: three 0.28" LED digital tube
Display color: Red and Blue (two-color display)
Refresh rate: about 300mS / times
Measure accuracy: 1% (± 1 digit)
Operating temperature: -10 to 65° c
Operating Humidity: 10 to 80% (non-condensing)
Working pressure: 80 to 106 kPa
Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement
MH-M28 M28 Bluetooth MP3 Audio Receiver Lossless Decoder HiFi BLT 4.2 MH-MX8
SKU:
2340
In stock
Condition: new
Type: voltage regulator
Dissipation power: Audio Modul
Operating temperature: -40- + 85
Supply voltage: MP3 decoder board
It is a low power Bluetooth design solution that supports the latest Bluetooth 4 transmission, 2, two-channel
stereo lossless playback and Bluetooth wireless transmission when the module is connected to Bluetooth,
which is very convenient, in an open environment, the Bluetooth connection distance can be up to 20 meters.
Widely used in a variety of Bluetooth Audio Reception, a variety of DIY audio modification.
1. Bluetooth version V4.2, compatible with Bluetooth automatic connection technology, compatible
with WAV / WMA / FLAC / APE / MP3 lossless decoding, stereo dual channel output.
2. After turning on the module, the mobile phone searches for the Bluetooth name MH-M28, and can play
music after connecting Bluetooth.
3, Blue indicator light module:
If Bluetooth is not connected, the indicator light flashes rapidly;
When the bluetooth connection is on, the indicator light is always on;
Color: Photo color
MH-MX8 M38 Bluetooth MP3 Audio Receiver Lossless Decoder BLT HiFi 4.2 MH-M38
SKU:
2339
In stock
Type: voltage regulator
Dissipation power: Audio Module
Operating temperature: -40- + 85
Supply voltage: MP3 decoder board
It is a low power Bluetooth design solution that supports the latest Bluetooth 4 transmission, 2, two-channel
stereo lossless playback and Bluetooth wireless transmission when the module is connected to Bluetooth,
which is very convenient, in an open environment, the Bluetooth connection distance can be up to 20 meters.
Widely used in a variety of Bluetooth Audio Reception, a variety of DIY audio modification.
1. Bluetooth version V4.2, compatible with Bluetooth automatic connection technology, compatible
with WAV / WMA / FLAC / APE / MP3 lossless decoding, stereo dual channel output.
2. After turning on the module, the mobile phone searches for the Bluetooth name MH-M38, and can play
music after connecting Bluetooth.
3, Blue indicator light module:
If Bluetooth is not connected, the indicator light flashes rapidly;
When the bluetooth connection is on, the indicator light is always on;
Color: Photo color
MICRO USB to DIP Adapter 5pin Female Connector B Type PCB Converter
SKU:
1121
In stock
Mini 360 DC Buck Converter Step Down LM2596 Module 2A
Electronic Components, Active Components, DIY Projects, Integrated Circuits, Voltage Converters and Power Supplies
SKU:
1710
In stock
Rectification Methods: synchronous rectification
Input Voltage: 4.75V-23V
Output Voltage: 1.0V-17V
Output Current: Peak 3A, long 1.8A
Conversion Efficiency: 96% (the highest)
Switching Frequency: 340KHz
Output Ripple: 340mV (empty cut pm)
Load Regulation: +/- 0.5%
Voltage Regulation: +/- 2.5%
Working Temperature: -40°C - + 85°C
External Dimensions: 17 * 11 * 3.8mm (L * W * H)
Mini MP3 Bluetooth 4.1 BT Audio Amplifier Amplifier Decoder Module
SKU:
2505
In stock
MX1508 1.5A 2 way DC Motor Driver Module PWM Speed Dual H-Bridge Stepper L298N
SKU:
1640
In stock
Use of imported original chip, built-in low on-resistance MOS switch, minimal heat, no heat sink, small size, low power consumption, is ideal for battery powered.
(L298N internal transistor switch, low efficiency, high fever, need to add heat sink, bulky, L298N very easy to burn).
Dual 1.5A * 2, the peak current to be 2.5A, built-in thermal protection circuit, do not be afraid motor stall burned, automatic recovery after the temperature dropped.
Small size, light weight, 0 standby current, is the ideal choice for your car model.
Dual H-bridge motor driver, can drive two DC motors or a 4-wire two-phase stepper motor.
The module supply voltage 2V-10V.
Signal input voltage 1.8-7V.
Single Operating current 1.5A, peak current up to 2.5A, low standby current (less than 0.1uA).
Built-in common conduction circuit, when the input pin is left floating, the motor does not malfunction.
Built-in thermal protection circuit with hysteresis effects (TSD), without worrying about motor stall.
Product Size: 24.7 * 21 * 5mm (length, width, height), ultra-small size.
The mounting hole diameter: 2 mm.
MXIC MX25L3206E 25L32 12G Flash Memory Chip 32Mbit 4MB
SKU:
2097
In stock
NRF NRF24L01 Transceiver wireless data transmission module 2.4G
SKU:
1219
In stock
low operating voltage: 1.9 ~~ 3.6V low-voltage.
high-rate: 2Mbps, air transmission time is very short, greatly reducing the wireless transmission of collision phenomena (software settings 1Mbps or 2Mbps air transmission rate).
Multi-frequency points: 125 frequency points, to meet the multi-point communications and frequency hopping communications needs.
ultra-compact: built-in 2.4GHz antenna compact 15x29mm (including antenna).
Pack of 2 Crystal Oscillator 12MHz Oscillator, HC-49S
SKU:
2638
In stock
Pack of 2 Crystal Oscillator 20 MHz
SKU:
2639
In stock
Pack of 2, lot of 2 Frequency 20 MHz Crystal Oscillator
20 Mhz frequency
Load capacitance: 20pF.
Frequency tolerance: +/-20 ppm
Best for micro-controller based projects done in school and colleges.
Works best with any kind of micro-controllers.
Standard frequency crystals - use these crystals to provide a clock input to your microprocessor.
It provide clock pulses of 20 Mhz frequency. It can be used as UART clock.
It allows integer division to common baud rates (96?115200 baud or 96?96?1,200 baud).
It is a common clock for AVR microcontroller It uses the mechanical resonance of a vibrating crystal of
piezoelectric material to create an electrical signal with a very precise frequency.
Load capacitance: 20pF.
Frequency tolerance: +/-20 ppm.
Color: Silver
Pack of 2 Crystal Oscillator 25MHz 25M HC-49S 25m crystal 2 pin
SKU:
2640
In stock
Pack of 2 Crystal Oscillator 25MHz 25M HC-49S 25m crystal 2 pin
Introduction:
A crystal oscillator is an electronic oscillator circuit that uses the mechanical resonance of a
vibrating crystal of piezoelectric material to create an electrical signal with a very precise frequency.
This frequency is commonly used to keep track of time, to provide a stable clock signal for
digital integrated circuits.
Pack of 2 Crystal Oscillator 32.768 MHz Crystal HC-49S
SKU:
2641
In stock
Pack of 2 CRYSTAL Oscillator 8MHZ
SKU:
2637
In stock
Pack of 2 Crystals Oscillator 4MHz
SKU:
2636
In stock
PAM8610 XH-M181 digital power amplifier board 2 x15w dual channel stereo
SKU:
1637
In stock