K15A50D TK15A50D N-Ch MOSFET TO-220
KY32-SEMS12 IC
L7135 AMC7135 Constant SOT-89 Current 350mA 2. 7-6V High Power LED Driving
L7135 AMC7135 Constant Current 350mA 2. 7-6V High Power LED Driving
The AMC7135 is a low dropout current regulator
rated for 350mA constant sink current. The low quiescent
current and low dropout voltage is achieved by advanced
Bi-CMOS process.
? 350mA constant sink current.
? Output short / open circuit protection.
? Low dropout voltage.
? Low quiescent current
? Supply voltage range 2.7V ~ 6V
? 2KV HBM ESD protection
? Advanced Bi-CMOS process.
? SOT-89 and TO-252 package
L7812CV TO-220 12V 1.5A LM7812 7812 Positive-Voltage Regulators
LA78040 TV and CRT Display Vertical Output IC
The LA78040 is a vertical deflection output IC for high image quality TV and CRT displays that supports the use of a bus control system signal-processing IC. The sawtooth waveform from the bus control system signal-processing IC can directly drive the deflection yoke (including the DC component). Color TV vertical deflection system adjustment functions can be controlled over a bus system by connecting the LA78040 to a Sanyo LA768X series or LA769XX series bus control system signal-processing IC.
Since the LA78040 provides a maximum deflection current of 1.8Ap-p, it is optimal for small and medium size CRTs.
Features:
- Built-in pump-up circuit for low power dissipation
- Vertical output circuit
- Thermal protection circuit
LM324 Quad Operational Amplifier IC
LM324 Quad Operational Amplifier IC (14-Pin)
Short Circuited Protected Outputs
True Differential Input Stage
Single Supply Operation: 3.0 V to 32 V (LM224, LM324, LM324A)
Low Input Bias Currents: 100 nA Maximum (LM324A)
Four Amplifiers Per Package
Internally Compensated
Common Mode Range Extends to Negative Supply
Industry Standard Pinouts
ESD Clamps on the Inputs Increase Ruggedness without Affecting Device Operation
Pb-Free Packages are Available
LM358 LM358DR SOP-8 SOIC-8 SMD IC
LM393DR LM393D LM393 SMD IC Dual Differential Comparator SOP-8
The LM393 series are dual independent precision voltage
comparators capable of single or split supply operation. These devices
are designed to permit a common mode range?to?ground level with
single supply operation. Input offset voltage specifications as low as
2.0 mV make this device an excellent selection for many applications
in consumer, automotive, and industrial electronics.
LM4871 Audio Amplifier IC
PO at 10% THD+N, 1kHz
Number of Channels: 1 Channel
Supply Voltage Range: 2.0V to 5.5 V
Operating Supply Current:6.5 mA
PSRR - Power Supply Rejection Ratio: 60 dB
Output Power: 3W
Audio - Load Impedance: 3 Ohms
THD plus Noise: 0.25 %
Shutdown Current: 0.6?A (typ)
THD at 1kHz at 1W Continuous Average Output Power into 8? 0.5% (max)
Available in 8-Pin WSON, VSSOP, SOIC, or PDIP packages
MAX485 MAXIM IC
- Low Power Consumption Minimizes Thermal Dissipation, Reducing System Cost
- 120µA to 500µA Quiescent Current
- Shutdown Current of 0.1µA
- Single 5V Supply Voltage
- Slew-Rate-Limited Drivers (MAX483/MAX487/MAX488 and MAX489)
- Up to 250kbps Data Rate
- Unlimited Drivers: Up to 2.5Mbps Data Rate
- Integrated Protection Enhances System Robustness
- Short Circuit Current Limited Driver
- Integrated Thermal Shutdown
- Receiver Fail-Safe for Input Open Circuit
- Guarantees Logic High
- 1/4 Unit Loading (MAX487/ MAX1487 only) Allows Up to 128 Devices on a Single Bus
- 48kΩ Receiver Input Resistance