Home » Electronic Components » Optoelectronic Displays

Showing 1–12 of 15 results

0.91 inch OLED display White 12832 IIC 128*32 LCD screen for arduino display device SSD1306

SKU: 1561

In stock

PKR  430
0.91 inch 128x32 I2C IIC Serial White OLED LCD Display Module 12832 SSD1306 LCD Screen Driver IC: SSD1306 Size: 0.91 inch OLED Resolution: 128 x 32 IIC interface Display Color: white

12V DC voltmeter range 8 – 30V LED Digital Voltage Panel Meter

SKU: 1143

In stock

Original price was: PKR  280.Current price is: PKR  190.
Range: DC8-30V (No need aditional power) Display: Three 0.56'' LED digital tube Display color: red Refresh rate: about 500mS / times Input: DC voltage (<2 times the range) Resolution: 1% +1 digit

6 in 1 AC 100A Digital Voltmeter Ammeter Energy Power Frequency Factor Current Panel Meter Detector

SKU: 2168

In stock

PKR  2,750
Current types: 100A Power supply: 80~260V AC Display type: LCD Shell material: Reinforced nylon Dimensions: 89.6x49.6mm/3.53x1.95inch Color: Black LCD: Blue

Clear Acrylic Case Shell Housing For ESR SCR/MOS / LCR-T4 Transistor Tester

SKU: 1235

In stock

PKR  300
Description: 100% brand new and high quality Shape: Same as the picture show Clear Acrylic Housing : Suit For: LCR-T4 Transistor Tester Diode Triode Capacitance ESR Meter Note: It is DIY Parts, Not Assembled Package Included: 1 x Clear Housing Case

CP2102 WiFi Bluetooth 0.96 inch OLED ESP32 18650 Battery Development Board ESP8266

SKU: 2089

In stock

PKR  2,150
18650 charging system integrated. indicate LED inside(Green means full& Red means charging) Charging and working could be at the same time. 1 Switch could control the power. 1 extra LED could be programmed(Connected with GPIO16[D0]) 0.5A charging current 1A output Over charge protection Over discharge protection Full ESP32 pins break out

DC 0V-100V Mini 0.28 inch Red LED Digital Voltmeter 3 wire

SKU: 1186

In stock

PKR  250


  • 2 line working voltage: 4.0~40V (with reverse connection protection function)
  • 2 wire detection voltage: 0.0~40V
  • 3 line working voltage: 4.0~40V (with reverse connection protection function)
  • 3 wire detection voltage: 0.0~100V
  • Operating current: <20mA
  • Display: 0.28, “LED”, red
  • Size: 33 x 10.7 x 8.2 mm (length * width * height)
  • Installing openings: 28.5 * 10 mm
  • The measurement rate: more than 200mS/ times
  • Measuring accuracy: 3 per thousand
  • Extreme working condition
  • Low operating voltage: +4.0V
  • Maximum operating voltage: +40V
  • Operating temperature: -10 ~ +65 DEG C
  • Working humidity: 10 ~ 80% (without gel)
  • Working pressure: 80 ~ 106 kPa

DC 100V 50A Red Blue Digital Voltmeter Ammeter 2 in1 DC Volt Amp Meter With Shunt

SKU: 1746

In stock

PKR  1,500
Operating voltage:DC 4 ~ 30V Measure voltage: DC 0 ~ 100V Minimum resolution(V): 0.1V Measure current :50A (require external shunt) Minimum resolution(A): 0.1A Operating current: <20mA Display: three 0.28" LED digital tube Display color: Red and Blue (two-color display) Refresh rate: about 300mS / times Measure accuracy: 1% (± 1 digit) Operating temperature: -10 to 65° c Operating Humidity: 10 to 80% (non-condensing) Working pressure: 80 to 106 kPa Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement

Flysky FS-i6 FS I6 2.4G 6ch RC Transmitter with Receiver For RC Helicopter Plane Quadcopter Glider

SKU: 1304

In stock

PKR  19,500
RF specification: RF Range: 2.405 - 2.475GHz Bandwidth: 500khz RF Power: less than 20dBm RF mode: AFHDS 2A Modulation type: GFSK RX Sensibility: -105dBm Receiver specification: Channel: 6 Model type: fixed wing/helicopter/glider RF receiver sensitivity: -105dBm Modulation: GFSK System type: AFHDS2A/AFHDS Channel resolution: 1024 steps Bind port: yes Power port: yes( VCC) Power: 4V -6.5V DC Weight: 6.4g Antenna lenght: 26mm Size: 40.4 x 21.1 x 7.35 mm

MP3 module/Card speakers USB MP3 decoding module PCBA board JLH-68016H

SKU: 1951

In stock

PKR  600
Usb flash disk support up to 32gb Digital screen LED display Micro SD Card Fm 87.5~107.5 Tf card support up to 32gb Power supply 5~12V Dc

OLED Display Module 12864 0.96 Inch 4Pin yellow/ Blue IIC I2C LED For Arduino

SKU: 1934

In stock

PKR  550
The instructions on four needles IIC interface module Four needles iic interface is relatively simple, only two signal lines 1. The GND power to 2. The VCC power supply is (3 ~ 5.5 V) 3. The SCL OLED D0 feet, for the clock pin in the IIC communication 4. The SDA OLED D1 feet, in the IIC communication pin for the data

QC2.0 QC3.0 Automatic USB Trigger Tester Voltage Ammeter Quick Charger Power Bank Voltage

SKU: 2350

In stock

PKR  650
USB female port output. QC 2.0 5V/9V/12V trigger voltage. Supports Manual mode and Auto mode. Manual mode: Short press for trigger voltage switch. Auto mode: Long press enter auto mode, trigger voltage will repeat in the sequence of 5V to 9V to 12V. For test charger and power bank that support QC2.0 output.

Square LED 8X8 Common Dots Matrix Module Arduino

SKU: 1025

In stock

PKR  450
LED Lattice Tube Matrix Module LED Display Dot Pin Numbers 16 Pins Total Size 60 x 60 X 7mm/ 2.4" x 2.4" x 0.28" (L*W*H) Material Plastic