Showing 25–36 of 579 results

150W DC-DC Boost Converter 10-32V to 12-35V 6A Step Up Voltage Charger Power

SKU: 1188

In stock

PKR  600
Input voltage :10-32V Output voltage: 12-35V (adjustable) Output Current: 6A (MAX) Input Current: 10A (MAX) (Please enhance heat dissipation if more than 10A) Output power: natural cooling 100W (MAX), enhance heat dissipation 150W (MAX) Easy to drive 65W 90W dual-core notebook.
Add to cart
Last updated: February 19, 2024

16 Channel 12-bit PWM/Servo Driver-I2C interface PCA9685 module

SKU: 1969

In stock

PKR  1,200
5V compliant, and still talks to a 3.3V microcontroller. 6 “address select” pins for configuring up to 62 ICs on a single I2C bus PWM frequency adjustable up to approximately 1.6kHz 12-bit frequency resolution (equates to about 4µs resolution at 60Hz refresh rate) Configurable as push-pull or open-drain output Output enable pin available for outside-the-microcontroller “shut it down!” control.
Add to cart
Last updated: March 9, 2024

16 Key 4×4 Membrane Switch Keypad 4*4 Matrix Array Smart Car keyboard for arduino Diy Kit

SKU: 2348

In stock

PKR  150
Contact resistance 500 () Insulation resistance 100 M Key FORCE OF 150-200N Bounce time 1 (MS) Life of 100 million (times) Operating temperature 60 () 1, the electronic characteristics Classification of the circuit: 35 V (DC), MA, 1 W Contact resistance: 10-500 (Varies according to lead lengths and is different from those of the material used) Insulation resistance: 100 M 100 V Dielectric strength: 250 VRms (50 ~ 60Hz 1 min) Electric shock jitter: <5 ms Service life: touch type: one million times 2, the mechanical properties Operating pressure: touch: 170-397g (6-14 oz) Travel switch: touch type: 0.6 ~ 1.5mm 3, environment parameters Operating temperature: -40 to + 80 Storage temperature: -40 to + 80 Temperature: 40.90% to 95%, 240 hours Vibration: 20G max (10 ~~ 200Hz Mil-SLD-202 M204. Condition B )
Add to cart
Last updated: March 9, 2024

1602 LCD Board Keypad Shield Blue Backlight

SKU: 1562

In stock

PKR  570
1. This is a basic 16 character by 2 line black-on-green display. 2. Utilizes the extremely common HD44780 parallel interface chipset. 3. Interface code is freely available. 4. Blue Backlight with white words. 5. uses 4 Bit LCD Library. 6. Size:8cm x 5.9cm - 3.15inch x 2.32inch.
Add to cart
Last updated: August 22, 2023

18650 battery holder bracket spacer Cell cylindrical li-ion 18650 battery

SKU: 1705

In stock

PKR  12
Features High Quality Plastic Bracket Cascadable to make larger battery packs. Plastic notches fit in the next bracket and provide rigid battery holding Small size, low weight, easy to carry 1X 18650 batteries side by side to form a compact battery pack Applications Battery holder for Robots Battery holder for Emergency Lights Battery holder for USB Power Banks Battery holder for Personal Tracker or Vehicle Trackers Battery holder for custom designed hand-held electronic gadgets.
Add to cart
Last updated: April 3, 2024

1S 3.7V 3A LI-ION BMS PCM BATTERY PCB PROTECTION BOARD

SKU: 1864

In stock

PKR  50
Over charge voltage: 4.25±0.05V Over charge release voltage:4.23±0.05V Over discharge voltage:2.54±0.1V Maximal continuous charging current: 2A Over current protection: 3A
Add to cart
Last updated: March 4, 2024

1S 3A 3.7V Li-ion BMS PCM Protection Board for 18650 Lithium Lion Battery

SKU: 1814

In stock

PKR  70
Over charge voltage: 4.25±0.05V Over charge release voltage:4.23±0.05V Over discharge voltage:2.54±0.1V Maximal continuous charging current: 2A Maximal continuous Discharging current: 2A Over current protection: 3A The main function: Overcharge protection, over discharge protection, short circuit protection, over current protection.
Add to cart
Last updated: March 4, 2024

2 CHANNEL 5v RELAY Module 2-channel

SKU: 1042

In stock

PKR  350
Relay contact capacity 250V10A. Relay output normally open, normally closed; • active low. 5V relay signal input voltage range :0-5V; • VCC system power. JD-VCC relay power. Default 5V relay. JD-VCC and VCC shorted
Add to cart
Last updated: August 9, 2023

2.4 inch TFT LCD Shield SD Socket Touch Panel Module for Arduino UNO

SKU: 1846

In stock

PKR  2,000
2.4 inch LCD TFT display has Bright, 4 white-LED backlight . Colorful, 18-bit 262,000 different shades 4-wire resistive touchscreen 240 x 320 resolution Spfd5408 controller with built in video RAM buffer 8 bit digital interface, plus 4 control lines Uses digital pins 5-13 and analog 0-3. Digital pins 2, 3 and analog 4 and 5 are available for user defined purpose.. Pin 12 is available if micro SD is not used. 5V compatible, can be used with 3.3V or 5V logic Size: 71 x 52 x 7mm
Add to cart
Last updated: March 11, 2024

2.4A 2.1A QC LED Display Dual USB Micro Type-C Lightning Power Bank Circuit 18650 Lithium Charger Board

SKU: 3091

In stock

PKR  570
Size: 6.5 * 2.5 * 0.1cm Weight: 10.8G IR of PCM : ?65 m? Allowed 0V change: Yes Constant current: 2.4A Dual output current: 5V 2.4A Input voltage B+ to B-: 3.0 - 4.2V Charging cable: support three type of USB Cables for iPhone Lightning & Andriod Type-C Micro USB
Add to cart
Last updated: March 4, 2024

2.54mm 2×40 Pin Male Double Row Right Angle Pin Header Strip

SKU: 1404

In stock

PKR  20
2.54mm 2x40 Pin Male Double Row Right Angle Pin Header Strip
Add to cart
Last updated: February 5, 2024

200ml 209ml SOP8 Socket to DIP8 IC Programmer adapter soic8 eeprom flash

SKU: 1848

In stock

PKR  450
Applications: Programmer,test socket,for SOP8 IC chips. Package:SOP8/SOIC8/SO8,lead pitch 1.27mm,Chip body width is 5.27mm Features:SOP8 to DIP8,baseplate lead to double row DIP 8P,lead pitch 2.54mm(100mil),width 1.52cm(600mil) Use for OnePro/MiniPro/DreamPro programmer.
Add to cart
Last updated: April 8, 2024