W1209 heating element for incubator hair dryer accessories curling iron heater 90? degrees Celsius 12V air heater
Electronic Components & Supplies, Active Components, Cables, Home & Living Accessories, Hand Tools & Repairs, Integrated Circuits, Connectors & Terminals
SKU:
2328
W1209 LED thermostat Temperature Controller Incubation
SKU:
1055
W1209 Mini thermostat Temperature controller Incubation thermostat temperature control switch
Brand new and high quality
Quantity:1pcs
Temperature control range: -50 ~ 110 ° C
Resolution: -9.9 to 99.9 is 0.1° C , 1 ° C temperature ranges other
Measurement Accuracy: 0.1 ° C
Control accuracy: 0.1 ° C
Hysteresis accuracy: 0.1 ° C
Refresh rate: 0.5 S
Input Power: DC12V
Measuring inputs: NTC (10K 0.5%) Waterproof sensor 0.5M
Output: 1 Channel relay output, capacity = 10A
Environmental requirements: -10 ~ 60 degree Humidity 20% -85%
W1209WK W2809 DC 12V LED Digital Thermostat Temperature Control Module + NTC Sensor thermostat Incubation
SKU:
1729
Temperature measurement range:-50Celsius-110Celsius
Temperature 0.1,other paragraph 1 Celsius
Accuracy:0.1Celsius
Return difference accuracy:0.1Celsius
Refresh rate:0.5s
High temperature protection:0-110Celsius
The input voltage:DC12V
Measurement input:NTC (10K 0.5%) waterproof type sensor
Output:10 a relay all the way
Environmental requirements:-10Celsius,-60Celsius humidity 20%-85%
Easy to use as compare to traditional w1209 module
W25Q128BVFG 25Q128BVFG W25Q128 25Q128 SOP16
SKU:
2111
W25Q64 64Mbit 8MByte Storage FLASH interface module SPI BV FV
SKU:
2325
W25Q64 W25Q64BVSIG SOP8 SMD 64M-BIT 8MB SERIAL FLASH MEMORY
SKU:
1817
The W25Q64FW (64M-bit) Serial Flash memory provides a storage solution for systems with limited
space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash
devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP)
and storing voice, text and data. The device operates on a single 1.65V to 1.95V power supply with current
consumption as low as 4mA active and 1µA for power-down. All devices are offered in space-saving
packages.
W3002 XH-3002 220V Digital LED Temperature Controller 10A Thermostat Control Switch Probe with waterproof sensor
SKU:
2065
XH-3002 220V Digital LED Temperature Controller 10A Thermostat Control Switch Probe with waterproof sensor W3002
Description
Temperature measurement range: - 50 ~ 110?C
Temperature control range: - 50 ~ 110?C
Temperature measuring accuracy: plus or minus 0.2 ?C
Temperature control precision: plus or minus 0.1 ?C
Measuring input: NTC10K L = 1 meters waterproof probe
Input power: according to the classification of choice
Output power: according to the classification of choice
Appearance size: 60 * 45 * 31 mm
this Temperature Controller come with 1meter waterproof sensor
this item sensor use 2P plug ,very easy to change , you also can choose more long sensor
Water Level Sensor Module Detection Depth Height Arduino
SKU:
1015
WeMos D1 Esp-Wroom-02 Motherboard ESP8266 Mini WiFi Nodemcu Module with 18650 Battery holder
SKU:
1965
One AD inputs.
Micro USB inputs.
One programmable LED (D0).
AUTO PROGRAM circuit.
ESP8266 (ESP-WROOM-02 With TELEC) is equivalent to the NodeMCU.
Analog Input (AD): Built-in dividing resistor (AD = 220K – ADC – 100K = GND).
There is a SOLDER terminal for SLEEP MODE.
Compatible With Arduino and NodeMCU.
Operation and charging are possible at the same time.
18650 charging circuit including the 5V boosting circuit with TP5410.
Overcharge protection, over-discharge protection built in.
LED: Red = Charging, Green = Full charging.
3000 mA 18650 It is possible to operate for more than 17 hours on a battery.
Integrated 18650 battery charging and discharging system.
One switch controls whether the 18650 battery is powered or not.
OLED’s SDA and SCL connected to the D1 pin and the D2 pin respectively.
The five buttons are controlled by FLATH, RSET, D5, D6, and D7 respectively.
The 5 Digital pins can configure the write/read/interrupt/PWM/I2C/one-wire supported separately.
Operation and NodeMCU consistent, adding a programmable LED, you can use GPIO16 to control, display 8266 running status and other functions. Integrated OLED and five buttons, more convenient for development.
The design concept originates from the open source project NodeMCU, and the development board integrates 18650 charging and discharging systems with charging and discharging protection. At the same time, an OLED and five directional buttons are integrated to facilitate the development.
WeMos D1 mini ESP8266 NodeMcu 4M bytes Lua WIFI module
SKU:
1329
WeMos D1 R2 V2.1.0 WiFi Uno Based integration of ESP8266 32Mb flash For Arduino Nodemcu Compatible
Electronic Components & Supplies, Active Components, Integrated Circuits, Consumer Electronics, Other Electronics
SKU:
1381
