Home » Electronic Components » Smart Boards

Showing all 7 results

Arduino UNO R3 SMD ATmega328P Board

SKU: 1138

In stock

PKR  1,700
Add two rows of the holes for the pins. So it can be connected with normal Dubond line. Add 3 rows of the holes for wiring. Change the in-line package of ATMEGA328P to flat package. CH340G Replace ATmega16U2

ECG Monitoring Sensor Module AD8232 Kit for Measuring Heart Pulse

SKU: 1780

In stock

PKR  1,650
The AD8232 is an integrated front-end for signal conditioning of cardiac bioelectrical signals for heart rate monitoring. This is a low-power, single-lead, heart rate monitor analog front end for a wide range of vital signs monitoring applications. Technical Parameters: Supply voltage: DC 3.3V Output: Analog output Interface (connected to RA LA RL): 3PIN 2.54 pin or headset Size 36mm * 31mm * 18mm Operating temperature: -40 'C - +85 'C

Arduino Pro Mini 328 Mini ATMEGA328 5V/16MHz

SKU: 1347

In stock

PKR  1,170
Using Atmel Atmega328P - AU microcontroller digital input/output port RX and TX, D2 ~ D13, A0 ~ A5 8 analog input port A0 ~ A7 Support serial download 16 MHZ clock frequency

Arduino Pro Mini 328 Mini ATMEGA328 3.3V/16MHz

SKU: 1029

In stock

PKR  1,050
Using Atmel Atmega328P - AU microcontroller digital input/output port RX and TX, D2 ~ D13, A0 ~ A5 8 analog input port A0 ~ A7 Support serial download 16 MHZ clock frequency

ESP8266 NodeMcu Lua WIFI development board based on the CP2102

SKU: 1737

In stock

PKR  650
Chip Module: CP2102 Working Temperature: -40 ℃ ~ +125 ℃ Power Input: 4.5V ~ 9V (10VMAX), USB-powered Wi-Fi Module – ESP-12E module similar to ESP-12 module but with 6 extra GPIOs. USB – micro USB port for power, programming and debugging Headers – 2x 2.54mm 15-pin header with access to GPIOs, SPI, UART, ADC, and power pins Misc – Reset and Flash buttons Power – 5V via micro USB port Drive Type: Dual high-power H-bridge driver Current: continuous transmission ≈70mA (200mA MAX)

STM32F030F4P6 ARM CORTEX-M0 Core Minimum System Dev Board for Arduino

SKU: 2629

In stock

PKR  600
STM32F030F4P6 ARM CORTEX-M0 Core Minimum System Dev Board for Arduino Model: STM32F030F4P6 16K flash memory, 4K SRAM. The target MCU is STM32F030F4P6. This board is a STM32F030F4P6 Minimum System Board (Cortex-M0) It's a ARM 32-bit Cortex-M0 CPU, frequency up to 48 MHz, high-speed embedded memories. Integrating micor USB power supply interface. ISP/SWD programming/debugging interface, boot mode selection and more feature rich device. Color: blue

STM8S103F3P6 system board STM8S STM8 development board minimum core board

SKU: 2069

In stock

PKR  290
The development board using MicroUSB cable supply, compatible with smart phone lines, data lines is simple and easy to get, but not USB MINI line-powered, USB MINI line is not easy to find, has been gradually phased out. Other manufacturers of products are used in MINI-USB port, this is not applicable for customers. Low price, user-friendly design, a full set of data, allowing you to save money, save time, effort, worry! STM8S core board of the main features: 1. Use STM8S103F3P6 as the master IC. 2. You can use 2.54 pin on the board or power supply pad, the pad when using power supply, input voltage range 4.5V-15V, can output to the outside through pin 3.3V! Note: 5V pin?s voltage is the input voltage of the module. 3. leads to all pins, the pins next to the pin marked the label, with a reset button, power LED, and the program demonstrates LED, small but perfectly formed. 4. Support SWIM debug mode. 1. The core board schematics (PDF format) and tested source. Burned into the test program, LED flashes, allowing you to detect the core board is working properly. 2. Provide at IAR and STVD two development environments register operation and routine operation of the library functions. Timer routine, UART transmit routine, UART receive routines, clock switching routines, AD routines and so on. 3.STM8 Applications. 4.STM8 package library. 5.IAR development environment, STVP programming software.