Home » Electronic Components

Showing 1–12 of 456 results

Solar fan 12V Ceiling Fan 12 Wire Circuit Nashpati BLDC

SKU: 2621-1

In stock

PKR  1,070
DC Ceiling Fan Circuit Kit Circuit Type : Universal, 8 Wire Circuit, DC Power Wire, DC Circuit : Ceiling Fan, Best quality, Easy to Install

Two-position two-way solenoid valve normally open DC3V-5V electric

SKU: 3400

In stock

Original price was: PKR  300.Current price is: PKR  250.

Specifications Of KSV05A:

  • Model: KSV05A
  • voltage: 3 to 5 V DC
  • Leakage: <3 mmHg/min
  • Max pressure: 300 mmHg
  • Type: Normal open
  • Rated life cycle: 30000 cycles @ ON 7s and OFF 5s
  • Resistance: 23+- 10% Ohm
  • weight: 10g
  • Size: 10*12*20 mm
  • Application: Medical device, Laboratory, Environmental solutions, others.

1200w 20A Dc Boost Step-up Converter

SKU: 3398

In stock

Original price was: PKR  3,500.Current price is: PKR  2,450.


  • Module name: 1200W boost constant current module
  • Module properties: non isolated boost module (BOOST)
  • Input voltage: 10-60V
  • Input current: 20A
  • Quiescent operating current: 15mA
  • Output voltage: 12-83V continuous adjustable
  • Output current: MAX 12A over 20A, please strengthen the
  • cooling (with input and output differential pressure, the greater
  • the pressure difference between the output current is small)
  • Constant current range: 0.3-20A
  • Output power: = input voltage  x 10A
  • Working temperature: -40~+85 degrees
  • Working frequency: 150KHz
  • Conversion efficiency: ≤95% (efficiency and input, output voltage,
  • current, pressure difference)
  • Installation: 4pcs 3mm column
  • Connection mode: welding output (please use big current and pure copper wire)
  • Module size: 130mmx52mmx46mm(LxWxH)

XL4015 5A CC CV Adjustable Buck Converter

SKU: 3397

In stock

Original price was: PKR  450.Current price is: PKR  350.
  1. Input voltage range:5-36VDC
  2. Output voltage range:1.25-32 VDC adjustable
  3. Output current: 0-5A
  4. Output power: 75W
  5. High efficiency up to 96%
  6. Built in thermal shutdown function
  7. Built in current limit function
  8. Built in output short protection function
  9. Input reverse polarity protection

XL6019 5A DC-DC Step Up Boost Converter

SKU: 3396

In stock

Original price was: PKR  550.Current price is: PKR  300.
1. The XL6019 5A DC-DC Step Up Boost Converter Uses conventional BOOST complete constant voltage output scheme, internal integration of MOSFET, less peripheral devices, low system cost; 2. Wide voltage range input, input voltage up to 35V;the output voltage can be adjusted, and the maximum can be supported by 40V. 3. Built in over temperature protection, over-current protection full set of reliability and protection circuit, high reliability. 4. The system conversion efficiency can reach more than 90%, which is convenient for thermal design. 5.  TO263-5L standard package, suitable for boosting applications within 30W. Specification: – Material: PCB Board – Size: 5cm/1.97inch

PD65W Fast Charging Module 5V3A 9V3A 12V3A 20V3.25A to USB C PD3.1 QC3.0

SKU: 3385

In stock

PKR  399
Item Type: Fast Charging Module Material: PCB Input Voltage: DC 8‑32V Output Voltage: Automatically Adjusted Between 3.3‑21V When Connected to Type C Compatible Powered Devices (input Voltage Should Be Higher Than Output Voltage, Input Voltage Should Be Higher Than 20V If You Want to Trigger 20V Fast Charging) Output Power: Maximum 65W (5V3A, 9V3A, 12V3A, 20V3.25A, Etc.) Conversion Efficiency: 92%‑97%. Output Voltage Ripple: <200mV

3S 4S 4A Type-C DC 3.7V 5V Charging Discharge Integrated Step Up Battery Charger Module

SKU: 3384

In stock

PKR  290PKR  299
TP4056 5V  18650 TYPE-C USB lithium Battery Charger Module Charging Board With Protection Input voltage: 4.35-6V (recommended voltage 5v) Charge cut-off voltage: 4.2V +/- 1% Maximum load current output: 1000 ma Battery overcharge protection voltage: 4.28V Battery Overcharge Boost Voltage: 4.00V Battery discharge protection voltage: 3.0V Battery discharge termination voltage: 3.2V Battery: current 3A overcurrent protection Board size: about 2.5 * 1.65CM Indicator light: without charging the light not bright, the red light to recharge, it is full of green light.

SW6206 SW6208 Qc4 Pd3.0 22.5w Power Bank Module

SKU: 3383

In stock

PKR  650PKR  850
TYPE-C INTERFACE Built in USB type-C interface logic support Try.SRC function BC1.2 MODULE Support bc1.2 DCP mode Support apple / Samsung mode LIGHTNING DECRYPTION Built in lightning decryption function BUILT IN 12BIT ADC FOR POWER METERING AND DISPLAY Built in coulometer for accurate electric quantity PROTECTION MECHANISM Input Overvoltage Protection Output over current / short circuit protection Charging timeout / overvoltage protection Temperature protection RECOMMENDED PARAMETERS Parameters symbol MIN Typical. MAX — UNIT Input Vottage VBUSBVB 4.5 135 OV Battery Voltage BAT 28 45 0 Working Temperature -20 +600 °C

Universal Multifunction Inverter For Backlight Led Constant Current Board

SKU: 3359

In stock

PKR  750
Multifunction Inverter for Backlight LED Constant Current Board Driver Board 12 connecters LED Strip Tester
100% Brand New
Size : 120mm(L)×30mm(W)
Input Voltage: 6V-20V
Supported: 15inch-24inch panel
Supporting 12 kinds of Definition with 7pcs cables


SKU: 3329

In stock

PKR  35
Electrical: Rated voltage: 250V Rated current: 12A Contact resistance: 20mΩ Insulation resistance: 5000MΩ/1000V Withstanding Voltage: AC1500V/1Min Wire range: 22-14AWG Material: Housing: PA66, UL94V-0 Pin header: Copper, Tin plated Mechanical: Temp. Range: -40ºC~+105ºC Breakdown voltage: 2500V Safety approval: UL CE


SKU: 3328

In stock

PKR  25
Length [ l ]: 16.2 mm Pitch: 5.08 mm (0.200") Width [ w ]: 15.2 mm Constructional height: 12.92 mm Height [ h ]: 16.22 mm Pin dimensions     0,5 x 1 mm Pin spacing: 10.16 mm Wire Termination: Screw-less - Spring Cage, Tension Clamp Mounting Type: Through Hole Features: Lever Actuated Hole diameter: 1.3 mm Nominal current IN: 12 A Maximum load current: 12 A (with 1.5 mm² conductor cross section) Insulating material: PA Flammability rating according to UL 94: V0 Stripping length: 10 mm


SKU: 3327

In stock

PKR  250
The KY-010 Photo Interrupter module is a switch that will trigger a signal when light between the sensor’s gap is blocked. This module is suitable for various electronics platforms like Arduino, Raspberry Pi, ESP32 and others.

Electronic Components All kind of modules and converter modules in Pakistan