Electronic Components All kind of modules and converter modules in Pakistan

Showing all 15 results

1200w 20A Dc Boost Step-up Converter

PKR  2,750

Specification

  • Module name: 1200W boost constant current module
  • Module properties: non isolated boost module (BOOST)
  • Input voltage: 10-60V
  • Input current: 20A
  • Quiescent operating current: 15mA
  • Output voltage: 12-83V continuous adjustable
  • Output current: MAX 12A over 20A, please strengthen the
  • cooling (with input and output differential pressure, the greater
  • the pressure difference between the output current is small)
  • Constant current range: 0.3-20A
  • Output power: = input voltage  x 10A
  • Working temperature: -40~+85 degrees
  • Working frequency: 150KHz
  • Conversion efficiency: ≤95% (efficiency and input, output voltage,
  • current, pressure difference)
  • Installation: 4pcs 3mm column
  • Connection mode: welding output (please use big current and pure copper wire)
  • Module size: 130mmx52mmx46mm(LxWxH)

12V DC voltmeter range 8 – 30V LED Digital Voltage Panel Meter

PKR  190
Range: DC8-30V (No need aditional power) Display: Three 0.56'' LED digital tube Display color: red Refresh rate: about 500mS / times Input: DC voltage (<2 times the range) Resolution: 1% +1 digit

220V soldering iron 60W High quality

PKR  650
Material: Plastic + stainless steel + copper Power Supply: 2-Flat-Pin Plug (220v-240v) Power: 60W

300W 20A Step Down Buck Converter Module Voltage Regulator

PKR  1,250
Input voltage : 4.5-30V Output voltage: 0.8-28V (adjustable) output must be lower 2V than input. Output Current: 0 - 20A (MAX) Input Current: 20A (MAX)

300W Step Down Buck Converter Adjustable 9A

PKR  970
Material: PCB board and electronic component Input voltage: 5-40V Output voltage: 1.2-35V (continuously adjustable) Output Current: 9A (power tube temperature exceeds 65°C please add cooling fan) Constant current range:0.2-9A ( adjustable ) Output Power: Maximum power is about 300W (power tube temperature exceeds 65°C please add cooling fan)

5v Micro USB 1A TP4056 Charging Board Module

PKR  38
This linear charger board allows you to charge lipo battery using either a Mini Micro USB connector or a 4.5V - 5.5V input. Specifications: Red: Charging Green: Fully Charged Input Voltage: 4.5V - 5.5V Charge Voltage: 4.2V Charging Precision: 1.5% Dimensions: 22mm x 16mm

CP2112 Evaluation kit for Debug CCS811 Board USB To I2C Communication Module

PKR  1,450
USB to I2C bridge board. Direct connection to PC via USB or direct connection to host system via I2C. Simple software GUI for easy setup and data logging CP2112 Evaluation kit for the CCS811 Debug board. Size: Approx. 30 x 20 x 5mm/1.2 x 0.8 x 0.2inch

LM2596S Step Down LCD display Adjustable Power Module Voltmeter

PKR  350
The Voltmeter Resolution: ±0.1V
The Voltmeter Digital Display Range: 0v-45v
The Voltmeter Input Voltage Range: Dc 4v-40v
Output Voltage: Continuous Adjustable (1.3v-37 V)
Output Current: 2a
size :65*35mm
Led Digital Voltmeter

Power Bank Dual USB 5V 1A 2.1A 18650 Battery Charger PCB Accessories

PKR  470
Micro USB input: 5V 1A USB Output: 5V 2.1A / 5V 1A(Dual USB interface) Charging display: intelligent digital display Batteries Type: liquid lithium-ion batteries (18650)

Power Bank Dual USB 5V 1A 2.1A Mobile 18650 Battery Charger PCB Power Module Accessories(No LCD)

PKR  250
Input Parameter:5v/1A Input Interface:V8 interface micro USB Output Parameter: double USB output:5v/2A Conversion Rate:90% average

TP4056 5V 1A 18650 TYPE-C USB lithium Battery Charger Module Charging Board With Protection

PKR  47
TP4056 5V 1A 18650 TYPE-C USB lithium Battery Charger Module Charging Board With Protection Input voltage: 4.35-6V (recommended voltage 5v) Charge cut-off voltage: 4.2V +/- 1% Maximum load current output: 1000 ma Battery overcharge protection voltage: 4.28V Battery Overcharge Boost Voltage: 4.00V Battery discharge protection voltage: 3.0V Battery discharge termination voltage: 3.2V Battery: current 3A overcurrent protection Board size: about 2.5 * 1.65CM Indicator light: without charging the light not bright, the red light to recharge, it is full of green light.

UX-A-01 Forehead Thermometer Infrared Non-contact Digital Body temperature

PKR  1,850
UX-A-01 Forehead Thermometer Infrared Non-contact Digital Body Thermometer Working temperature: ambient temperature 10.0 ? -35.0 ??50.0?- 95.0?? Power supply voltage: DC 3.0V 2 * AAA alkaline battery (not included) Product size: L * W * H: 149 * 90 * 45mm Measuring range: 35 ? -42.9 ?(95.0?-109.2?) ( Body temperature mode) Accuracy: 35 ? -42 ?(95.0?-107.6?) : ? 0.2 ? (? 32.4?) Outside 35 ? -42 ?(95.0?-107.6?): ? 0.3 ? (? 32.5?) Measuring distance: 1 cm ~ 3cm Storage transportation: -20 ? ~ + 55 ? (-68.0?~+131.0?), relative humidity: ?93%

VIPER22A VIPER22 AP8022 DIP-8

PKR  50
Import taxes or fees
1, Import duties, taxes and other costs incurred in your side are not included in the cost of goods. These costs will be provided by the buyer.
2. Please indicate your country? The customs office to determine what these additional costs will be before buying.
3.- Please confirm detailed information about delivery invoice. For example, as the price, we should write on the waybill invoice, or how to describe the goods, and so on. e ..
Recall
1, for your opinion is very important to our development, we sincerely invite you to leave us positive feedback, if you are satisfied with our products and services. Thanks for your time.
2, our program will leave back the same feedback to you after your positive feedback.
3. Before you leave neutral or negative feedback, please contact us and we will do our best to solve the problem.
Thank you for your support and wish you have a nice day!

XL4015 5A CC CV Adjustable Buck Converter

PKR  350
Specification
  1. Input voltage range:5-36VDC
  2. Output voltage range:1.25-32 VDC adjustable
  3. Output current: 0-5A
  4. Output power: 75W
  5. High efficiency up to 96%
  6. Built in thermal shutdown function
  7. Built in current limit function
  8. Built in output short protection function
  9. Input reverse polarity protection

XL6019 5A DC-DC Step Up Boost Converter

PKR  300
1. The XL6019 5A DC-DC Step Up Boost Converter Uses conventional BOOST complete constant voltage output scheme, internal integration of MOSFET, less peripheral devices, low system cost; 2. Wide voltage range input, input voltage up to 35V;the output voltage can be adjusted, and the maximum can be supported by 40V. 3. Built in over temperature protection, over-current protection full set of reliability and protection circuit, high reliability. 4. The system conversion efficiency can reach more than 90%, which is convenient for thermal design. 5.  TO263-5L standard package, suitable for boosting applications within 30W. Specification: – Material: PCB Board – Size: 5cm/1.97inch