low operating voltage: 1.9 ~~ 3.6V low-voltage.
high-rate: 2Mbps, air transmission time is very short, greatly reducing the wireless transmission of collision phenomena (software settings 1Mbps or 2Mbps air transmission rate).
Multi-frequency points: 125 frequency points, to meet the multi-point communications and frequency hopping communications needs.
ultra-compact: built-in 2.4GHz antenna compact 15x29mm (including antenna).
MT3608 DC-DC Adjustable Boost Module 2A Step Up Module with MICRO USB 2V - 24V to 5V - 28V MT3608 LM2577
1. The maximum output current: 2A
2. The input voltage: 2V and 24V
3. The maximum output voltage: > 5V - 28V
4. Efficiency: > 93%
5 Colors 5mm F5 Ultra Bright Round LED Diode Kit Red / Green / Blue / White / Yellow
Working current: 20 (mA)
Working voltage: Red: 1.9V-2.1V
Yellow: 1.9V-2.1V
Blue:3.0V-3.2V
Green: 3.0V-3.2V
White:3.0V-3.2V
The 74HC595; 74HCT595 is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs. Both the shift and storage register have separate clocks. The device features a serial input
Note:Output voltage must be higher than Input Voltage
Input Voltage:2-6V(less than 3V,output power cut down)
Output Voltage:3.3V-9V adjustable(Input voltage must less than output voltage)
Output Current:Rated 2000mA (2.8V-3V input, 5V output, 1500MA output,(single lithium battery higher 2600MAH input,5V output, output current can up to 2000MA)
Note:Output voltage higher than 6V,Please connect power first,then connect load line
This module is based on a touch detection IC (TTP223B) of Capacitive type touch jog switch module . This module default output low, the low-power mode to mode; when a finger touching the corresponding position, the module will output high and returns low again touch. Mode is switched to fast mode; when for 12 seconds without touching
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
Switching Frequency: 150KHz
Rectifier: Non-Synchronous Rectification
Module Properties: Non-isolated step-down module (buck)
Short circuit protection: current limiting, since the recovery
Operating temperature: Industrial grade (-40 to +85 ) (output power 10W or less)
Full load temperature rise: 40
Adjust the light soft and stable, no flickering
PWM digital dimming, avoid rush current, protect your LED lights
Mainly use to adjust single color LED light lamps and Led Strip
Reviews
There are no reviews yet.