Car Vehicle Bike Tools and Accessories
10A 3s li-ion lithium battery 18650 12V BMS PCB protection board buy in Pakistan
PKR 180 – PKR 210
کسٹمر کو رقم ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے
| Weight | 0.004 kg |
|---|---|
| Color Family |
Type A, Type B |
On Sale Products
Related products
3S BMS 12V 100A Li-ion LMO protection lithium battery circuit board li-polymer balance charging module
SKU:
2502
In stock
3S BMS 12V 100A Li-ion LMO protection lithium battery circuit board
li-polymer balance charging module
18650 battery charging module For lithium polymer protection board (3.7V)
Single cell battery overcharge protection voltage: 4.21-4.29V
Single cell battery overload protection recovery voltage: 4.14-4.24V
Overload protection delay: 1.5-2. 3S
Single cell battery over discharge protection voltage: 2.72-2.88V
Protection against current overload: 100 A
Over current protection: 100 A
Over discharge protection delay: 0.5-1. 3S
Temperature protect: Yes
Disconnect protect: Yes
Scarcity to protect: Yes
Shortage delay: 100-600 EE. USA
Scarcity Protection Recovery: Yes
Charging current: 60A
The current balance: Yes
Ampere (current): 60 mA
Voltage accuracy: 4.14-4.24V
DC 12V Ceiling Fan 8 Wire Circuit
SKU:
2621
In stock
2.4A 2.1A QC LED Display Dual USB Micro Type-C Lightning Power Bank Circuit 18650 Lithium Charger Board
SKU:
3091
In stock
4S 20A 14.8V 16.8V Li-ion Lithium 18650 Battery BMS PCM Protection PCB Board
SKU:
2657
In stock
4 series 18650 battery 16.8V 16V 14.8V
14.8V (Li-ion 18650 or li-ion battery rated voltage)
16.8V (full charge voltage of lithium ion battery)
14.4V (nominal voltage of Lipo battery pack)
4S LI-ION BMS parameters:
Overcharge voltage: 4.25-4.35v ? 0.05v
Upper discharge voltage: 2.3-3.0v ? 0.05v
Max. Working current: 10A
Max. Peak current: 20A
Operating temperature: -40 --- + 50
Storage temperature: -40- + 80
Small current: 6uA
Life Cycle: 50000 hours
Resistance: 45m?
20A 3s li-ion lithium battery 18650 charger 12.6V BMS protection board
SKU:
1555
In stock
HW-370 TP5100 Single Double 18650 Lithium Battery Charging Board 2A Charger Module
SKU:
2969
In stock
TP5100 Single/Double 18650 Lithium Battery Charging Board 2A Charger Module
- Double 8.4v / 4.2v lithium rechargeable single
- Programmable charge current. 0. 1A-2A
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V
- Red and green LED charge status indicator
- Chip temperature protection, overcurrent protection, undervoltage protection
- Battery temperature protection, reverse battery shutdown, short circuit protection
- Switching frequency 400Khz, usable inductance 20uH and more
- PWR_ON Power battery for switching control
Dual 2 Double USB Fast Charger Buck Module Input 6V- 30V Single Port 24W Support QC2.0 QC3.0 QC 2.0 3.0 Car Vehicle Board
SKU:
2081
In stock
Dual 2 Double USB Fast Charger Buck Module Input 6V- 30V Single Port 24W Support QC2.0 QC3.0 QC 2.0 3.0 Car Vehicle Board
Dual-port independent output, support protocol: QC2.0, QC3.0, MTK PE1.1 / 2.0, FOR Apple, FS Samsung AFC, FORHuawei FCP, FOR Spreadtrum SFCP
Input voltage: DC 6 ~ 30 v
Output voltage: standard 5v, fit range 3 ~ 12v after fast charging protocol
Output capacity: single-port rated current 2.4A, rated power 24 watts
Protection measures: Output over-voltage protection, limit the output voltage does not exceed 13v (in the case of chip failure); input with a fuse.
Single Cell 18650 Lithium Battery Boost QC Fast Charge QC2.0 QC3.0 Module Board 3.7V 4.2V Convert 5V 9V 12V USB Mobile Phone Quick Charging
SKU:
2080
In stock
Single Cell Lithium Battery Boost Power Module Board 3.7V 4.2V Liter 5V 9V 12V USB Mobile Phone QC Fast Charge QC2.0 QC3.0
Product model: AILAVI-180312
Name: Single-cell lithium battery boost fast charging source module
Main control chip: TPS61088A
Identification chip: FP6601Q
Input voltage: 2.8 ~ 4.5V, very suitable for 3.7V polymer lithium battery
Output voltage: The default is 5V, triggering fast charge after 4.5V ~ 12V according to the protocol.
Input rated current: 8A
Output current: 5V3A, 9V2A, 12V2A. Output current is adaptive.
Output power: up to 24W.
Support Agreement: QC2.0, QC3.0, Huawei FCP, DCP Agreement
Efficiency is up to 93%, with a typical value of 90%.
Module size: 47.5 (length) * 16.5 (width) * 8 (height) mm (including USB)
Module net weight: about 7 grams
The FP6601Q chip integrates the HiSilicon fast charge protocol and Qualcomm QC2.0/3.0USB interface fast charge protocol, which can quickly charge devices that support FCP and QC2.0/3.0 protocols. In addition to supporting the USB BC1.2 standard, it also supports FOR Apple and FOR Samsung devices. The chip can automatically detect whether the currently connected device is a QC2.0/3.0 or FCP device to automatically adjust the voltage.
feature of product:
1. Support FCP voltage and current output protocol.
2. Support Qualcomm QC2.0/3.0 classA 5V, 9V, 12V voltage output.
3. Automatically recognize FCP and QC2.0/3.0 fast charge protocol.
4. Support the protocol equipment of Chinese telecom enterprise YD/T 1591.
The TPS61088 is a high power density, fully integrated boost converter with an 11m? power switch and a 13m? rectifier switch that provides an efficient, small form factor solution for portable systems. With a wide input voltage range of 2.7V to 12V, the TPS61088 supports applications with single or two-cell Li-Ion batteries. The device features 10A switching current capability and is capable of delivering output voltages up to 12.6V.
The TPS61088 uses an adaptive constant off-time peak current control topology to regulate the output voltage. The TPS61088 operates in PWM mode under medium to heavy load conditions. Under light load conditions, the device can select one of the following two modes of operation via the MODE pin. One is a PFM mode that increases efficiency; the other is a forced PWM mode that avoids application problems due to low switching frequency. The switching frequency in PWM mode can be adjusted from 200kHz to 2.2MHz with an external resistor. The TPS61088 also implements a programmable soft start function and an adjustable switching peak current limit. In addition, the device is available with 13.2V output overvoltage protection, cycle-by-cycle overcurrent protection, and thermal shutdown protection.
The TPS61088 is available in a 20-pin 4.50mm ? 3.50mm VQFN package.
QC3.0 QC2.0 USB 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board 3V 5V 12V Charging Module
SKU:
2079
In stock
QC3.0 QC2.0 USB DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board 3V 5V 12V
your experience to unparalleled inspiration.
Output voltage: The default is 5V. After the fast charge is triggered, it is automatically adjusted between 3 and 12V.
Output Power. 24W (5V, 3.4A, 9V, 2.5A, 12V, 2A, etc.)
Output voltage wired compensation
Conversion efficiency: 90% to 97%
Supports multiple fast charging protocols
Input over voltage, undervoltage protection
Input over-current protection
Output overcurrent and short circuit protection
Over temperature protection
Support fast charging protocol
for BC1.2, iPhone, Samsung agreement
for Qualcomm QC2.O and QC3.O
MTKPEI.1/PE2.O
Fast Charge Protocol FCP
Star Fast Charge Protocol AFC
Spreadtrum Fast Charge Agreement SFCP
Applications
Solar panel to mobile phone charging
Car charging retrofit
Driving recorder power supply
Home power conversion
color: black
Material:Metal + PC
4S 40A Li-ion 18650 BMS PCM Battery Protection Board Balance Lipo Module 14.8V 16.8V
SKU:
1967
In stock
4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 46 * 60 * 3.4mm (balanced version)
Product weight: 10.3g (balanced version)
Charging voltage: 16.8V - 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 40A
1S 3.7V 3A LI-ION BMS PCM BATTERY PCB PROTECTION BOARD
SKU:
1864
In stock
Power Bank Dual USB 5V 1A 2.1A Mobile 18650 Battery Charger PCB Power Module Accessories(No LCD)
SKU:
1167
In stock
Description
Features:
Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries)
Product Size: 64mmx20mmx3.4mm
Material:Metal
Charging voltage: 12.6V
Maximum output current: 20A
Maximum output power / charging power: 252W
Product Size: 64mmx20mmx3.4mm
Material:Metal
Charging voltage: 12.6V
Maximum output current: 20A
Maximum output power / charging power: 252W
Overload voltage range: 4.25-4.35 v ? 0.05 v
Overpressure voltage range: 2.3-3.0 v ? 0.05 v
Note:
1. After connection,it need to first charge activation, then will have the output.
2. Do not mix the good battery and poor battery to use.The internal resistance of 3 battery capacity are closer will be better.Please buyers know the
professional knowledge of this module before buying
2. Do not mix the good battery and poor battery to use.The internal resistance of 3 battery capacity are closer will be better.Please buyers know the
professional knowledge of this module before buying
Package Included:
1x 10A 3s li-ion lithium battery 18650 charger 11.1V 12.6V PCB protection board
Reviews (1)
1 review for 10A 3s li-ion lithium battery 18650 12V BMS PCB protection board
Only logged in customers who have purchased this product may leave a review.
Shahab –
Super great price and quality