Car Vehicle Bike Tools and Accessories
2.4A 2.1A QC LED Display Dual USB Micro Type-C Lightning Power Bank Circuit 18650 Lithium Charger Board buy in Pakistan
PKR 570
In stock
کسٹمر کو رقم ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے
| Weight | 0.02 kg |
|---|
On Sale Products
Related products
MOS Field Effect Transistor Trigger Switch Driver Board
SKU:
3207
In stock
Specification:
1: working voltage: DC 5V--36V;
2: trigger signal source: digital high and low level (DC3.3V--20V), can be connected to the microcontroller IO port, PLC interface, DC power supply, can receive PWM signal, the signal frequency 0--20KHZ perfect support.
3: output: DC DC 5V--36V, continuous current at room temperature 15A, power 400W! Auxiliary heat dissipation, the maximum current up to 30A.
4: application: the output can control high power equipment, motor, bulb, LED lamp belt, DC motor, micro pump, solenoid valve, etc., can enter the PWM, control motor speed, the brightness of the lamp, etc..
5: service life: unlimited switch; working temperature: -40 - 85 C; size: 3.4*1.7*1.2cm
DC 12V Ceiling Fan 8 Wire Circuit
SKU:
2621
In stock
4S 20A 14.8V 16.8V Li-ion Lithium 18650 Battery BMS PCM Protection PCB Board
SKU:
2657
In stock
4 series 18650 battery 16.8V 16V 14.8V
14.8V (Li-ion 18650 or li-ion battery rated voltage)
16.8V (full charge voltage of lithium ion battery)
14.4V (nominal voltage of Lipo battery pack)
4S LI-ION BMS parameters:
Overcharge voltage: 4.25-4.35v ? 0.05v
Upper discharge voltage: 2.3-3.0v ? 0.05v
Max. Working current: 10A
Max. Peak current: 20A
Operating temperature: -40 --- + 50
Storage temperature: -40- + 80
Small current: 6uA
Life Cycle: 50000 hours
Resistance: 45m?
HW-370 TP5100 Single Double 18650 Lithium Battery Charging Board 2A Charger Module
SKU:
2969
In stock
TP5100 Single/Double 18650 Lithium Battery Charging Board 2A Charger Module
- Double 8.4v / 4.2v lithium rechargeable single
- Programmable charge current. 0. 1A-2A
- Programmable steady precharge current 10% -100%.
- Wide operating voltage, maximum reach I8V
- Red and green LED charge status indicator
- Chip temperature protection, overcurrent protection, undervoltage protection
- Battery temperature protection, reverse battery shutdown, short circuit protection
- Switching frequency 400Khz, usable inductance 20uH and more
- PWR_ON Power battery for switching control
24V 6S 15a lithium protection board, 6 packs of 18650 PCB BMS, lithium ion battery cell module
SKU:
2656
In stock
24V, 6S, 15a lithium protection board, 6 packs of 18650 PCB BMS, lithium ion battery cell module
Model: 6 string 22V 24V lithium battery protection board
Maximum operating current: Within15A
Charging current: Within 15A
Balanced charge: None
Short circuit protection: Yes
Applicable assembly: Nominal 3.7V Batteries / 6 strings
0.9V ~ 5V to 5V 600MA USB Output Charger Upgrade Module
SKU:
2087
In stock
Dual 2 Double USB Fast Charger Buck Module Input 6V- 30V Single Port 24W Support QC2.0 QC3.0 QC 2.0 3.0 Car Vehicle Board
SKU:
2081
In stock
Dual 2 Double USB Fast Charger Buck Module Input 6V- 30V Single Port 24W Support QC2.0 QC3.0 QC 2.0 3.0 Car Vehicle Board
Dual-port independent output, support protocol: QC2.0, QC3.0, MTK PE1.1 / 2.0, FOR Apple, FS Samsung AFC, FORHuawei FCP, FOR Spreadtrum SFCP
Input voltage: DC 6 ~ 30 v
Output voltage: standard 5v, fit range 3 ~ 12v after fast charging protocol
Output capacity: single-port rated current 2.4A, rated power 24 watts
Protection measures: Output over-voltage protection, limit the output voltage does not exceed 13v (in the case of chip failure); input with a fuse.
4S 40A Li-ion 18650 BMS PCM Battery Protection Board Balance Lipo Module 14.8V 16.8V
SKU:
1967
In stock
4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 46 * 60 * 3.4mm (balanced version)
Product weight: 10.3g (balanced version)
Charging voltage: 16.8V - 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 40A
1S 3A 3.7V Li-ion BMS PCM Protection Board for 18650 Lithium Lion Battery
SKU:
1814
In stock
Over charge voltage: 4.25±0.05V
Over charge release voltage:4.23±0.05V
Over discharge voltage:2.54±0.1V
Maximal continuous charging current: 2A
Maximal continuous Discharging current: 2A
Over current protection: 3A
The main function:
Overcharge protection, over discharge protection, short circuit protection, over current protection.
4S 30A Li-ion Lithium Battery 18650 charger protection board PCB
SKU:
1551
In stock
The protective board can be used as the nominal voltage of 14.4V, 14.8V, 16.8V four series of polymer lithium battery group, four series of 18650 lithium batteries as overcharge and over discharge, short circuit protection. Without the activation function in the power application for high instantaneous current,and in inverter application for avoid false triggering protection.So it will use more convenient.
Note:No part design on the back, can be attached to the heat sink to ensure high current work situation for a long time.
Power Bank Dual USB 5V 1A 2.1A 18650 Battery Charger PCB Accessories
SKU:
1122
In stock
5v Micro USB 1A TP4056 Charging Board Module
SKU:
1061
In stock
Description
2.4A 2.1A QC LED Display Dual USB Micro Type-C Lightning Power Bank Circuit 18650 Lithium Charger Board
Description:
Size: 6.5 * 2.5 * 0.1cm
Weight: 10.8G
IR of PCM : ?65 m?
Allowed 0V change: Yes
Constant current: 2.4A
Dual output current: 5V 2.4A
Input voltage B+ to B-: 3.0 – 4.2V
Charging cable: support three type of USB Cables for iPhone Lightning & Android Type-C Micro USB
Package contains:
1XPC PCB power bank QC
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.