Car Vehicle Bike Tools and Accessories
-24%
5v Micro USB 1A TP4056 Charging Board Module buy in Pakistan
PKR 38
کسٹمر کو رقم ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے
| Weight | 0.003 kg |
|---|
On Sale Products
Related products
MOS Field Effect Transistor Trigger Switch Driver Board
SKU:
3207
In stock
Specification:
1: working voltage: DC 5V--36V;
2: trigger signal source: digital high and low level (DC3.3V--20V), can be connected to the microcontroller IO port, PLC interface, DC power supply, can receive PWM signal, the signal frequency 0--20KHZ perfect support.
3: output: DC DC 5V--36V, continuous current at room temperature 15A, power 400W! Auxiliary heat dissipation, the maximum current up to 30A.
4: application: the output can control high power equipment, motor, bulb, LED lamp belt, DC motor, micro pump, solenoid valve, etc., can enter the PWM, control motor speed, the brightness of the lamp, etc..
5: service life: unlimited switch; working temperature: -40 - 85 C; size: 3.4*1.7*1.2cm
3S 25A Li-ion 18650 BMS PCM Battery Protection Board Balance Lipo Module
SKU:
1711
In stock
Over Charge voltage:4.25-4.35v±0.05v Over Discharge voltage: 2.3-3.0v±0.05v Max Working current:25A Max peak current:35-40A Working temperature:-40---+50 Storage Temperature:-40-- +80 Small current:50uA Life cycle:more then 30000 hours Resistance:Less than 100mΩ Short Cut : Protectable,Charge can repair
3S 60A Protection Charging Board PCM BMS 18650 Li-ion Lithium Battery for Drill Motor
SKU:
2369
In stock
Charging voltage: 12.6V - 13.6V
Type:enhanced version,balanced version
Model: BMS-60A-3S
Item:Battery Charger Protection Board
Scope of application: Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V
(including 18650, 26650, polymer lithium batteries, no size limit).
Continuous discharge current (upper limit): 60A (If the heat dissipation environment is not good,
please reduce the load current)
Continuous charging current (upper limit): 15A
Enhanced version version: Suitable for electric drills with a starting current of 120A or less and a power of 260W or less.
Balance version: Suitable for electric drills with starting current below 120A and power below 260W, with balanced
charging function.
2.4A 2.1A QC LED Display Dual USB Micro Type-C Lightning Power Bank Circuit 18650 Lithium Charger Board
SKU:
3091
In stock
20A 3s li-ion lithium battery 18650 charger 12.6V BMS protection board
SKU:
1555
In stock
3 USB 5V 2A Mobile Power Bank Lithium Battery Charger Module 3V to 5V Step Up Boost Power Module
SKU:
2767
In stock
3 USB 5V 2A Mobile Power Bank Lithium Battery Charger Module 3V to 5V Step Up Boost Power Module
5V 2A 2.1A Power Bank Battery Charger Module 3 USB Step Up Circuit Board
Apply Battery Type: 18650 battery(not include)
Output Voltage: 5V 2.1A
Input Voltage: 5V 1A
Instructions: Level 4 Capacity indicator
Lighting: with LED lights
Rated Voltage: 3.7V ( Suit for 3.2V-4.2V. The batteries are in parallel)
0.9V ~ 5V to 5V 600MA USB Output Charger Upgrade Module
SKU:
2087
In stock
Dual 2 Double USB Fast Charger Buck Module Input 6V- 30V Single Port 24W Support QC2.0 QC3.0 QC 2.0 3.0 Car Vehicle Board
SKU:
2081
In stock
Dual 2 Double USB Fast Charger Buck Module Input 6V- 30V Single Port 24W Support QC2.0 QC3.0 QC 2.0 3.0 Car Vehicle Board
Dual-port independent output, support protocol: QC2.0, QC3.0, MTK PE1.1 / 2.0, FOR Apple, FS Samsung AFC, FORHuawei FCP, FOR Spreadtrum SFCP
Input voltage: DC 6 ~ 30 v
Output voltage: standard 5v, fit range 3 ~ 12v after fast charging protocol
Output capacity: single-port rated current 2.4A, rated power 24 watts
Protection measures: Output over-voltage protection, limit the output voltage does not exceed 13v (in the case of chip failure); input with a fuse.
1S 3A 3.7V Li-ion BMS PCM Protection Board for 18650 Lithium Lion Battery
SKU:
1814
In stock
Over charge voltage: 4.25±0.05V
Over charge release voltage:4.23±0.05V
Over discharge voltage:2.54±0.1V
Maximal continuous charging current: 2A
Maximal continuous Discharging current: 2A
Over current protection: 3A
The main function:
Overcharge protection, over discharge protection, short circuit protection, over current protection.
4S 30A Li-ion Lithium Battery 18650 charger protection board PCB
SKU:
1551
In stock
The protective board can be used as the nominal voltage of 14.4V, 14.8V, 16.8V four series of polymer lithium battery group, four series of 18650 lithium batteries as overcharge and over discharge, short circuit protection. Without the activation function in the power application for high instantaneous current,and in inverter application for avoid false triggering protection.So it will use more convenient.
Note:No part design on the back, can be attached to the heat sink to ensure high current work situation for a long time.
Power Bank Dual USB 5V 1A 2.1A 18650 Battery Charger PCB Accessories
SKU:
1122
In stock
Tp4056 5V 1A Micro USB 18650 Lithium Dual Protection Battery Charging Module
SKU:
1094
In stock
Description
5V Mini MICRO USB Module 1A TP4056
Features:
This linear charger board allows you to charge lipo battery using either a Mini Micro USB connector or a 4.5V – 5.5V input.
Specifications:
Red: Charging
Green: Fully Charged
Input Voltage: 4.5V – 5.5V
Charge Voltage: 4.2V
Charging Precision: 1.5%
Dimensions: 22mm x 16mm
Net Weight: 3 g
Color: blue
Refrence Video how to use it :
Package Includs:
1 x 5V Mini Micro USB 1A TP4056 Lithium Battery Module
Reviews (9)
9 reviews for 5v Micro USB 1A TP4056 Charging Board Module
Only logged in customers who have purchased this product may leave a review.
Arain –
Very reasonable price
Do not use more than 2 ba…
Arain –
Very reasonable price
Do not use more than 2 ba…
Arain –
Very reasonable price
Do not use more than 2 ba…
Arain –
Very reasonable price
Do not use more than 2 ba…
Arain –
Very reasonable price
Do not use more than 2 ba…
Arain –
Very reasonable price
Do not use more than 2 ba…
Arain –
Very reasonable price
Do not use more than 2 ba…
Arain –
Very reasonable price
Do not use more than 2 ba…
anwar –
Boht acha tp