Output current up to 100 mA
Output voltages of 15V thermal overload protection ? Short-circuit protection
No external components are required
Available in either ? 4% (A) or ? 8% (C) selection
Output voltages of 15V thermal overload protection • Short-circuit protection
No external components are required
Available in either ± 4% (A) or ± 8% (C) selection
Description : The L78L15 series of three-terminal positive regulators employ internal current limiting and thermal shutdown, making them essentially indestructible. If adequate heat-sink is provided, they can deliver up to 100 mA output current. They are intended as fixed voltage regulators in a wide range of applications including local or oncard regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power pass elements to make high-current voltage regulators. The L78L15 series used as Zener diode/resistor combination replacement, offers e improvement along with lower quiescent current and lower noise.
7812 Voltage Regulator is a member of 78xx series of fixed linear voltage regulator ICs. 7812 provides +12V regulated power supply.
Input voltage (14V-35V)
Ground (0V)
Regulated output 12V (11.5V-12.5V)
Programmable Charge Current Up to 1000mA
No MOSFET, Sense Resistor or Blocking Diode Required
Complete Linear Charger in SOP-8 Package for Single Cell Lithium-IonBatteries
Constant-Current/Constant-Voltage
Charges Single Cell Li-Ion Batteries Directly from USB Port
Preset 4.2V Charge Voltage with 1.5% Accuracy
Automatic Recharge
Soft-Start Limits Inrush Current
The AT24C32N series are 32,768/65,536 bits of serial Electrical Erasable and Programmable Read Only Memory,
commonly known as EEPROM.
They are organized as 4096 words of 8 bits (one byte) each.
The devices are fabricated with proprietary advanced CMOS process for low power and low voltage applications.
These devices are available in standard 8-lead DIP, 8-lead SOP, 8-lead TSSOP, 5-lead SOT23, and 5-lead TSOT23 packages.
A standard 2-wire serial interface is used to address all read and write functions.
Our extended VCC range (1.8V to 5.5V) devices enables wide spectrum of applications.
The AT93C66 provides 4096 bits of serial electrically erasable programmable read-only memory (EEPROM), organized as 256 words of 16 bits
each (when the ORG pin is connected to VCC), and 256 words of 8 bits each
(when the ORG pin is tied to ground). The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are
essential. The AT93C66 is available in space-saving 8-lead PDIP, 8-lead
JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead MAP, 8-lead TSSOP, and 8-lead dBGA2
packages.
Brand Name: IGMOPNRQ
Type:Drive IC
Condition:New
Application:Computer
Supply Voltage:International standard
Dissipation Power:International standard
Operating Temperature:International standard
Model Number:W25Q128BVFG
is_customized:Yes
Package:SOP16
The AT93C56 provides 2048 bits of serial electrically erasable programmable read-only memory (EEPROM), organized as 128 words of 16 bits
each (when the ORG pin is connected to VCC), and 128 words of 8 bits each
(when the ORG pin is tied to ground). The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are
essential. The AT93C56 is available in space-saving 8-lead PDIP, 8-lead
JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead MAP, 8-lead TSSOP, and 8-lead dBGA2
packages.
SS8050 SOT23-3 y2 smd TRANSISTOR 40v 1.5A (PNP) original JSCJ product
Polarity: PNP
Maximum Collector Power Dissipation (Pc): 0.225 W
Maximum Collector-Base Voltage |Vcb|: 40 V
Maximum Collector-Emitter Voltage |Vce|: 25 V
Maximum Emitter-Base Voltage |Veb|: 5 V
Maximum Collector Current |Ic max|: 1.5 A
Max. Operating Junction Temperature (Tj): 150 °C
Forward Current Transfer Ratio (hFE), MIN: 200
S8050 SOT23-3 j3y TRANSISTOR (NPN)
FEATURES
Complimentary to S8550
Collector Current: IC=0.5A
MARKING: J3Y
MAXIMUM RATINGS (Ta=25℃ unless otherwise noted)
Symbol Parameter Value Unit
VCBO Collector-Base Voltage 40 V
VCEO Collector-Emitter Voltage 25 V
VEBO Emitter-Base Voltage 5 V
IC Collector Current -Continuous 0.5 A
Reviews
There are no reviews yet.