The AT93C86A provides 16384 bits of serial electrically erasable programmable read
only memory (EEPROM), organized as 1024 words of 16 bits each when the ORG pin
is connected to VCC and 2048 words of eight bits each when it is tied to ground. The
device is optimized for use in many industrial and commercial applications where lowpower
and low-voltage operations are essential. The AT93C86A is available in space
saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead mini-MAP (MLP 2×3), and 8-lead
TSSOP packages.
Description: The AT93C86A provides 16384 bits of serial electrically erasable programmable read only memory (EEPROM), organized as 1024 words of 16 bits each when the ORG pin is connected to VCC and 2048 words of eight bits each when it is tied to ground. The device is optimized for use in many industrial and commercial applications where lowpower and low-voltage operations are essential. The AT93C86A is available in space saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead mini-MAP (MLP 2×3), and 8-lead TSSOP packages.
Features: • Low-voltage and Standard-voltage Operation – 2.7 (VCC = 2.7V to 5.5V) – 1.8 (VCC = 1.8V to 5.5V) • User Selectable Internal Organization – 16K: 2048 x 8 or 1024 x 16 • Three-wire Serial Interface • Sequential Read Operation • Schmitt Trigger, Filtered Inputs for Noise Suppression • 2 MHz Clock Rate (5V) Compatibility • Self-timed Write Cycle (10 ms max) • High Reliability – Endurance: 1 Million Write Cycles – Data Retention: 100 Years • Automotive Devices Available • 8-lead JEDEC PDIP, 8-lead JEDEC SOIC, 8-lead mini-MAP (MLP 2×3), and 8-lead TSSOP
Fixed turn the lamp current to 0.1 times the value of the constant current (charge when used to identify whether the battery is full);
2. Increased input reverse polarity protection diode;
3. Using dedicated reference IC, and high-precision sampling resistor, so that the constant current is more stable, (20 degrees to 100 degrees, the constant current 1A, when the temperature drift of less than 1%).Particularly suitable for LED driver
*High-power LED constant current drive
*Lithium battery charger (including ferroelectric)
This linear charger board allows you to charge lipo battery using either a Mini Micro USB connector or a 4.5V - 5.5V input.
Specifications:
Red: Charging
Green: Fully Charged
Input Voltage: 4.5V - 5.5V
Charge Voltage: 4.2V
Charging Precision: 1.5%
Dimensions: 22mm x 16mm
Brand new & high quality
Breadboard power supply module, compatible with 5 V, 3.3 V
Apply to MB102 breadboard
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V can switch over
Maximum output current: <700 ma
Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V
Reviews
Clear filtersThere are no reviews yet.