The Universal Standard family LM358 monolithic ICs integrate two
independent op-amp circuits and phase compensation capacitors on a single chip,
feature high gain and low power consumption, and possess an operating voltage
range between 3[V]and 32[V] (single power supply.)
The AT93C56 provides 2048 bits of serial electrically erasable programmable read-only memory (EEPROM), organized as 128 words of 16 bits
each (when the ORG pin is connected to VCC), and 128 words of 8 bits each
(when the ORG pin is tied to ground). The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are
essential. The AT93C56 is available in space-saving 8-lead PDIP, 8-lead
JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead MAP, 8-lead TSSOP, and 8-lead dBGA2
packages.
This specification covers a range of 16 Kbit I2C bus
EEPROM products, the ST24C16 and the
ST24W16. In the text, products are referred to
as ST24x16 where "x" is: "C" for Standard ver-
sion and "W" for hardware Write Control version.
The ST24x16 are 16 Kbit electrically erasable
programmable memories (EEPROM), organized
as 8 blocks of 256 x8 bits.
This specification covers a range of 4 Kbits I2C bus
EEPROM products, the ST24C04 and the
ST24W04. In the text, products are referred to
as ST24x04, where "x" is: "C" for Standard
version and "W" for hardware Write Control version.
Applications:
1 Burglar alarm system
2 Smoke and fire alarm system
3Garage door controllers
4 Car door controllers
5 Car alarm system
6 Security system
7 Cordless telephones
8 Other remote control systems
Low-power, high-performance CMOS 8-bit microcontroller with 8KB of ISP flash memory. The device uses Atmel high-density, nonvolatile memory technology and is compatible with the industry-standard 80C51 instruction set and pinout
7812 Voltage Regulator is a member of 78xx series of fixed linear voltage regulator ICs. 7812 provides +12V regulated power supply.
Input voltage (14V-35V)
Ground (0V)
Regulated output 12V (11.5V-12.5V)
Continuous Drain Current, VGS @ 10V = 110 A
Pulsed Drain Current = 390 A
At 25°C Power Dissipation = 200 W
Linear Derating Factor = 1.3 W/°C
Gate-to-Source Voltage = ± 20 V
Avalanche Current = 62 A
Repetitive Avalanche Energy = 20 mJ
dv/dt Peak Diode Recovery dv/dt = 5.0 V/ns
Operating Junction and Soldering Temperature, for 10 seconds = 300 (1.6mm from case )°C
Description: The AT93C86A provides 16384 bits of serial electrically erasable programmable read only memory (EEPROM), organized as 1024 words of 16 bits each when the ORG pin is connected to VCC and 2048 words of eight bits each when it is tied to ground. The device is optimized for use in many industrial and commercial applications where lowpower and low-voltage operations are essential. The AT93C86A is available in space saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead mini-MAP (MLP 2×3), and 8-lead TSSOP packages.
Features: • Low-voltage and Standard-voltage Operation – 2.7 (VCC = 2.7V to 5.5V) – 1.8 (VCC = 1.8V to 5.5V) • User Selectable Internal Organization – 16K: 2048 x 8 or 1024 x 16 • Three-wire Serial Interface • Sequential Read Operation • Schmitt Trigger, Filtered Inputs for Noise Suppression • 2 MHz Clock Rate (5V) Compatibility • Self-timed Write Cycle (10 ms max) • High Reliability – Endurance: 1 Million Write Cycles – Data Retention: 100 Years • Automotive Devices Available • 8-lead JEDEC PDIP, 8-lead JEDEC SOIC, 8-lead mini-MAP (MLP 2×3), and 8-lead TSSOP
Reviews
There are no reviews yet.