BMP280 3.3 I2C/SP Barometric Pressure Sensor Module buy in Pakistan
PKR 330
Power supply: 3-5v (internal low dropout regulator)
Field range: ± 4800uT
Pressure range: 300-1100hPa
Temperature Accuracy: ± 1.0 ° C
Dimensions: 19.2mm x 17.9mm x 2.9mm / 0.8 “x 0.7″ x 0.1 ”
Weight: 1.3 g
Using Immersion Gold PCB, machine welding process to ensure quality
Vin- supply pin. Since the image using 3V DC, the board has a built-in voltage regulator that receives 3-5V DC and converts them to 3V. To use the module to be powered from the same voltage as the Arduino board.
3Vo – this is the output from 3.3V regulator. It can provide up to 100mA
GND – Point Table
In stock
Weight | 0.01 kg |
---|
Related Products
Recently Viewed Products
- Maxell CR2032 3V Lithium Coin Cell PKR 45
-
YE-02 Blender 380ml Portable USB Rechargeable Juicer Mini Juice Extractor Household Juice
PKR 2,500PKR 1,340 - MAX485 MAXIM IC PKR 40
Product Description:
BMP280 is an absolute barometric pressure sensor especially designed for mobile applications. The sensor module is housed in an extremely compact package. Its small dimensions and its low power consumption allow for the implementation in battery powered devices. Barometric sensor is ideal for measuring various weather conditions. This sensor has high accuracy and low cost making it an ideal solution for precision pressure measurements of up to ± 1 hPa and a temperature of up to ± 1.0 ° C. Because the pressure changes with altitude and pressure measurements are very accurate, you can use this sensor and the altimeter ± 1 meter accuracy.
Features
- BMP280
- Power supply: 3-5v (internal low dropout regulator)
- Field range: ± 4800uT
- Pressure range: 300-1100hPa
- Temperature Accuracy: ± 1.0 ° C
- Using Immersion Gold PCB, machine welding process to ensure quality
Pin supply:
- Vin– supply pin. Since the image using 3V DC, the board has a built-in voltage regulator that receives 3-5V DC and converts them to 3V. To use the module to be powered from the same voltage as the Arduino board.
- 3Vo – this is the output from 3.3V regulator. It can provide up to 100mA
- GND – Point Table
Package included:
1 x BMP280 Barometric Pressure Sensor
Weight | 0.01 kg |
---|
Only logged in customers who have purchased this product may leave a review.
Related Products
12V 8A Switch Dimmer Brightness Adjustable Controller for DC motor LED Strip Light
4 Channel I2C Logic Level Converter IIC Module 5V to 3.3v 4ch
Mosfet IRF3205 IRF3205PBF IR TO-220 55V 110A 200W
ESP8266 esp-01 remote serial Port WIFI wireless module D185
5A XL4015 DC-DC DSN5000 Adjustable Step Down Module with heat sink
Stepper Driver A4988 Module with Heat sink
L293D Motor Drive Shield for Arduino
PAM8403 mini 5V digital amplifier board with switch potentiometer
MICRO USB to DIP Adapter 5pin Female Connector B Type PCB Converter
5V 9V 12V 10A PWM DC Motor Speed Controller LED Dimmer Module Adjustable Speed Regulator
Related Products
XL6019 5A DC-DC Step Up Boost Converter
XL4015 5A CC CV Adjustable Buck Converter
Universal Box Power Supply Circuit Board SMPS for Satellite Receiver 4 pin
PCB TERMINAL BLOCK 3 POLES SCREW LESS
L9110 Dual Channel DC Motor Driver H bridge Controller Board
IRFB4110 N-CHANNEL TRANSISTOR 100V 120A
FC-33 10mm Arduino RPM Sensor Rotational Speed Measuring Sensor
- Using imported groove optical coupling sensor, width 5mm.
- It have the output state light, if output high level, the lights are off. if output low level ,it on.
- If it covered,it will output high level;otherwise it output low level.
- Good signal and waveform, with strong driving ability for more than 15mA.
- The working voltage of 3.3V to 5V.
- Output: digital switch output (0 and 1).
- Equipped with a fixed bolt hole, easily install.
- Small board PCB size: 3.2 cm x 1.4 cm.
- Use the LM393 wide voltage comparer.
1200w 20A Dc Boost Step-up Converter
Specification
- Module name: 1200W boost constant current module
- Module properties: non isolated boost module (BOOST)
- Input voltage: 10-60V
- Input current: 20A
- Quiescent operating current: 15mA
- Output voltage: 12-83V continuous adjustable
- Output current: MAX 12A over 20A, please strengthen the
- cooling (with input and output differential pressure, the greater
- the pressure difference between the output current is small)
- Constant current range: 0.3-20A
- Output power: = input voltage x 10A
- Working temperature: -40~+85 degrees
- Working frequency: 150KHz
- Conversion efficiency: ≤95% (efficiency and input, output voltage,
- current, pressure difference)
- Installation: 4pcs 3mm column
- Connection mode: welding output (please use big current and pure copper wire)
- Module size: 130mmx52mmx46mm(LxWxH)
Reviews
There are no reviews yet.