ECG Monitoring Sensor Module AD8232 Kit for Measuring Heart Pulse buy in Pakistan
PKR 1,450
The AD8232 is an integrated front-end for signal conditioning of cardiac bioelectrical signals for heart rate monitoring. This is a low-power, single-lead, heart rate monitor analog front end for a wide range of vital signs monitoring applications.
Technical Parameters:
Supply voltage: DC 3.3V
Output: Analog output
Interface (connected to RA LA RL): 3PIN 2.54 pin or headset
Size 36mm * 31mm * 18mm
Operating temperature: -40 ‘C – +85 ‘C
The AD8232 is an integrated front-end for signal conditioning of cardiac bioelectrical signals for heart rate monitoring.
This is a low-power, single-lead, heart rate monitor analog front end for a wide range of vital signs monitoring applications.
The AD8232 SparkFun Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart.
This electrical activity can be charted as an ECG or Electrocardiogram and output as an analog reading.
ECGs can be extremely noisy, the AD8232 Single Lead Heart Rate Monitor acts as an op amp to help obtain a clear signal from the PR and QT Intervals easily.
The AD8232 is an integrated signal conditioning block for ECG and other biopotential measurement applications.
It is designed to extract, amplify, and filter small biopotential signals in the presence of noisy conditions, such as those created by motion or remote electrode placement.
Supply voltage: DC 3.3V
Output: Analog output
Interface (connected to RA LA RL): 3PIN 2.54 pin or headset
Size 36mm * 31mm * 18mm
Operating temperature: -40 ‘C – +85 ‘C
Note: This product is NOT a medical device and is not intended to be used as such or as an accessory to such nor diagnose or treat any conditions.
Operating Voltage: 3.5V to 5.5V
Operating current: 0.3mA (measuring) 60uA (standby)
Output: Serial data
Temperature Range: 0°C to 50°C
Humidity Range: 20% to 90%
Resolution: Temperature and Humidity both are 16-bit
Accuracy: ±1°C and ±1%
13.56MHz contactless communication card chip
Low-voltage, low-cost, small size of the non-contact card chip to read and write
Smart meters and portable handheld devices developed better choice
The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
Switching Frequency: 150KHz
Rectifier: Non-Synchronous Rectification
Module Properties: Non-isolated step-down module (buck)
Short circuit protection: current limiting, since the recovery
Operating temperature: Industrial grade (-40 to +85 ) (output power 10W or less)
Full load temperature rise: 40
Reviews
Clear filtersThere are no reviews yet.