GT-24 Digital wireless Module 2.4G NRF24L01 PA LNA Industrial 1100M Distance buy in Pakistan
PKR 450
GT-24 Digital wireless Module 2.4G NRF24L01 PA LNA Industrial 1100M Distance
Model : GT-24
The GT-24 module is a 2.4GHz, 100mW, high speed (up to 2Mbps airspeed), high stability, industrial
grade wireless transceiver integrated data transmission module.
The module comes with a high-performance PCB antenna, precise impedance matching, and the
nRF24L01P RF chip, which has higher reliability, more power levels, and longer transmission
distance and lower power than the nRF24L01.
Also built-in RFX2401 power amplifier chip, built-in LNA, receiving sensitivity increased by 10dBm,
working in the ISM band of 2.4GHz~2.5GHz.
The module has sufficient transmit power, good spectral characteristics, small harmonics,
small channel crosstalk, and ultra-small size. It is a model of all Murata raw materials and
industrial grade standards.
It has a standard spacing of 2.54mm in-line interface and 1.27mm patch interface, which is
convenient for users to use with various circuits.
The GT–24 module also comes with a built-in PCB antenna and an ipx carrier external antenna,
which greatly enhances the module’s free characteristics and gives the user the greatest freedom.
In stock
Weight | 0.003 kg |
---|
Related Products
Product Description:
GT-24 Digital wireless Module 2.4G NRF24L01 PA LNA Industrial 1100M Distance
Specification:
Model : GT-24
Module size: 30.3 × 14.5mm (including PCB antenna)
Operating frequency band: 2.4GHz ~ 2.525GHz (adjustable, 1MHz step)
Interface mode: 1*8*1.27mm/2*4*2.54mm (The patch can also be used with the universal
board and DuPont line)
Supply voltage: DC 2.0-3.6V (Note: above 3.6V, the module will be permanently damaged)
Communication level : 0.7VCC ~3.3V (VCC refers to the module supply voltage)
Measured distance: 1000m (clear open space, maximum power, height 2m, 250k air speed)
Transmit power: 4 levels adjustable (maximum 20dBm, approx. 100mW at maximum power)
Air speed 250k ~ 2Mbps / 3 levels adjustable (250kbps, 1Mbps, 2Mbps)
Shutdown current: approx. 30uA (test condition: CE=0, power-down mode, VDD=3.0V)
Emission current: about 90mA (power supply capacity must be greater than 250m)
Receive current: about 20mA
Antenna form : PCB antenna / ipex carrier antenna
Communication interface : SPI maximum speed up to 10Mbps
Transmit length: Single packet 1~32 bytes Level 3 FIFO
Receive length : Single packet 1~32 bytes Level 3 FIFO
RSSI support : Not supported (only simple packet loss statistics are supported)
Receive sensitivity: -94dBm@250kbp
Working temperature: -40 ~ +85 °C (industrial grade)
Storage temperature: -40 ~ +125 °C (industrial grade)
Features:
– The GT-24 module is a 2.4GHz, 100mW, high speed (up to 2Mbps airspeed), high stability, industrial
grade wireless transceiver integrated data transmission module.
– The module comes with a high-performance PCB antenna, precise impedance matching, and the
nRF24L01P RF chip, which has higher reliability, more power levels, and longer transmission
distance and lower power than the nRF24L01.
– Also built-in RFX2401 power amplifier chip, built-in LNA, receiving sensitivity increased by 10dBm,
working in the ISM band of 2.4GHz~2.5GHz.
– The module has sufficient transmit power, good spectral characteristics, small harmonics,
small channel crosstalk, and ultra-small size. It is a model of all Murata raw materials and
industrial grade standards.
– It has a standard spacing of 2.54mm in-line interface and 1.27mm patch interface, which is
convenient for users to use with various circuits.
– The GT–24 module also comes with a built-in PCB antenna and an ipx carrier external antenna,
which greatly enhances the module’s free characteristics and gives the user the greatest freedom.
Package Included:
1 x GT-24 Digital Wireless Module
Related
Weight | 0.003 kg |
---|
Only logged in customers who have purchased this product may leave a review.
Related Products
5V 9V 12V 10A PWM DC Motor Speed Controller LED Dimmer Module Adjustable Speed Regulator
2 CHANNEL 5v RELAY Module 2-channel
4 Channel I2C Logic Level Converter IIC Module 5V to 3.3v 4ch
ESP8266 esp-01 remote serial Port WIFI wireless module D185
XL6009 DC-DC Booster Adjustable Super LM2577 Step-up Module
SN74HC595N 74HC595N 74HC595 DIP-16 SHIFT REGISTER IC
Mosfet IRF3205 IRF3205PBF IR TO-220 55V 110A 200W
F5 5MM Diffused Round DIP Diode LED Lamp Light Green Yellow Blue White Red Light Emitting Diode
150W DC-DC Boost Converter 10-32V to 12-35V 6A Step Up Voltage Charger Power
Related Products
XL6019 5A DC-DC Step Up Boost Converter
XL4015 5A CC CV Adjustable Buck Converter
Universal Box Power Supply Circuit Board SMPS for Satellite Receiver 4 pin
PCB TERMINAL BLOCK 3 POLES SCREW LESS
L9110 Dual Channel DC Motor Driver H bridge Controller Board
IRFB4110 N-CHANNEL TRANSISTOR 100V 120A
FC-33 10mm Arduino RPM Sensor Rotational Speed Measuring Sensor
- Using imported groove optical coupling sensor, width 5mm.
- It have the output state light, if output high level, the lights are off. if output low level ,it on.
- If it covered,it will output high level;otherwise it output low level.
- Good signal and waveform, with strong driving ability for more than 15mA.
- The working voltage of 3.3V to 5V.
- Output: digital switch output (0 and 1).
- Equipped with a fixed bolt hole, easily install.
- Small board PCB size: 3.2 cm x 1.4 cm.
- Use the LM393 wide voltage comparer.
1200w 20A Dc Boost Step-up Converter
Specification
- Module name: 1200W boost constant current module
- Module properties: non isolated boost module (BOOST)
- Input voltage: 10-60V
- Input current: 20A
- Quiescent operating current: 15mA
- Output voltage: 12-83V continuous adjustable
- Output current: MAX 12A over 20A, please strengthen the
- cooling (with input and output differential pressure, the greater
- the pressure difference between the output current is small)
- Constant current range: 0.3-20A
- Output power: = input voltage  x 10A
- Working temperature: -40~+85 degrees
- Working frequency: 150KHz
- Conversion efficiency: ≤95% (efficiency and input, output voltage,
- current, pressure difference)
- Installation: 4pcs 3mm column
- Connection mode: welding output (please use big current and pure copper wire)
- Module size: 130mmx52mmx46mm(LxWxH)
Reviews
There are no reviews yet.