GT-24 Digital wireless Module 2.4G NRF24L01 PA LNA Industrial 1100M Distance buy in Pakistan
PKR 450
GT-24 Digital wireless Module 2.4G NRF24L01 PA LNA Industrial 1100M Distance
Model : GT-24
The GT-24 module is a 2.4GHz, 100mW, high speed (up to 2Mbps airspeed), high stability, industrial
grade wireless transceiver integrated data transmission module.
The module comes with a high-performance PCB antenna, precise impedance matching, and the
nRF24L01P RF chip, which has higher reliability, more power levels, and longer transmission
distance and lower power than the nRF24L01.
Also built-in RFX2401 power amplifier chip, built-in LNA, receiving sensitivity increased by 10dBm,
working in the ISM band of 2.4GHz~2.5GHz.
The module has sufficient transmit power, good spectral characteristics, small harmonics,
small channel crosstalk, and ultra-small size. It is a model of all Murata raw materials and
industrial grade standards.
It has a standard spacing of 2.54mm in-line interface and 1.27mm patch interface, which is
convenient for users to use with various circuits.
The GT–24 module also comes with a built-in PCB antenna and an ipx carrier external antenna,
which greatly enhances the module’s free characteristics and gives the user the greatest freedom.
In stock
Weight | 0.003 kg |
---|
Related Products
Product Description:
GT-24 Digital wireless Module 2.4G NRF24L01 PA LNA Industrial 1100M Distance
Specification:
Model : GT-24
Module size: 30.3 × 14.5mm (including PCB antenna)
Operating frequency band: 2.4GHz ~ 2.525GHz (adjustable, 1MHz step)
Interface mode: 1*8*1.27mm/2*4*2.54mm (The patch can also be used with the universal
board and DuPont line)
Supply voltage: DC 2.0-3.6V (Note: above 3.6V, the module will be permanently damaged)
Communication level : 0.7VCC ~3.3V (VCC refers to the module supply voltage)
Measured distance: 1000m (clear open space, maximum power, height 2m, 250k air speed)
Transmit power: 4 levels adjustable (maximum 20dBm, approx. 100mW at maximum power)
Air speed 250k ~ 2Mbps / 3 levels adjustable (250kbps, 1Mbps, 2Mbps)
Shutdown current: approx. 30uA (test condition: CE=0, power-down mode, VDD=3.0V)
Emission current: about 90mA (power supply capacity must be greater than 250m)
Receive current: about 20mA
Antenna form : PCB antenna / ipex carrier antenna
Communication interface : SPI maximum speed up to 10Mbps
Transmit length: Single packet 1~32 bytes Level 3 FIFO
Receive length : Single packet 1~32 bytes Level 3 FIFO
RSSI support : Not supported (only simple packet loss statistics are supported)
Receive sensitivity: -94dBm@250kbp
Working temperature: -40 ~ +85 °C (industrial grade)
Storage temperature: -40 ~ +125 °C (industrial grade)
Features:
– The GT-24 module is a 2.4GHz, 100mW, high speed (up to 2Mbps airspeed), high stability, industrial
grade wireless transceiver integrated data transmission module.
– The module comes with a high-performance PCB antenna, precise impedance matching, and the
nRF24L01P RF chip, which has higher reliability, more power levels, and longer transmission
distance and lower power than the nRF24L01.
– Also built-in RFX2401 power amplifier chip, built-in LNA, receiving sensitivity increased by 10dBm,
working in the ISM band of 2.4GHz~2.5GHz.
– The module has sufficient transmit power, good spectral characteristics, small harmonics,
small channel crosstalk, and ultra-small size. It is a model of all Murata raw materials and
industrial grade standards.
– It has a standard spacing of 2.54mm in-line interface and 1.27mm patch interface, which is
convenient for users to use with various circuits.
– The GT–24 module also comes with a built-in PCB antenna and an ipx carrier external antenna,
which greatly enhances the module’s free characteristics and gives the user the greatest freedom.
Package Included:
1 x GT-24 Digital Wireless Module
Related
Weight | 0.003 kg |
---|
Only logged in customers who have purchased this product may leave a review.
Related Products
PAM8403 mini 5V digital amplifier board with switch potentiometer
ESP8266 esp-01 remote serial Port WIFI wireless module D185
Micro Servo SG90 9G Eletronic Module RC DIY Kit Robot Motor Tower
F5 5MM Diffused Round DIP Diode LED Lamp Light Green Yellow Blue White Red Light Emitting Diode
3V to 5V to 9V 2A USB Output Voltage Step-up Module Boost Converter
4-Phase Stepper Motor and Driver Board ULN2003 Module Arduino
HC-05 HC05 Bluetooth JY-MCU 6 Pin Module
XL6009 DC-DC Booster Adjustable Super LM2577 Step-up Module
TTP223 Touch Switch Button Module Single Channel Self Locking
5V 9V 12V 10A PWM DC Motor Speed Controller LED Dimmer Module Adjustable Speed Regulator
Related Products
XL6019 5A DC-DC Step Up Boost Converter
XL4015 5A CC CV Adjustable Buck Converter
Universal Box Power Supply Circuit Board SMPS for Satellite Receiver 4 pin
PCB TERMINAL BLOCK 3 POLES SCREW LESS
L9110 Dual Channel DC Motor Driver H bridge Controller Board
IRFB4110 N-CHANNEL TRANSISTOR 100V 120A
FC-33 10mm Arduino RPM Sensor Rotational Speed Measuring Sensor
- Using imported groove optical coupling sensor, width 5mm.
- It have the output state light, if output high level, the lights are off. if output low level ,it on.
- If it covered,it will output high level;otherwise it output low level.
- Good signal and waveform, with strong driving ability for more than 15mA.
- The working voltage of 3.3V to 5V.
- Output: digital switch output (0 and 1).
- Equipped with a fixed bolt hole, easily install.
- Small board PCB size: 3.2 cm x 1.4 cm.
- Use the LM393 wide voltage comparer.
1200w 20A Dc Boost Step-up Converter
Specification
- Module name: 1200W boost constant current module
- Module properties: non isolated boost module (BOOST)
- Input voltage: 10-60V
- Input current: 20A
- Quiescent operating current: 15mA
- Output voltage: 12-83V continuous adjustable
- Output current: MAX 12A over 20A, please strengthen the
- cooling (with input and output differential pressure, the greater
- the pressure difference between the output current is small)
- Constant current range: 0.3-20A
- Output power: = input voltage  x 10A
- Working temperature: -40~+85 degrees
- Working frequency: 150KHz
- Conversion efficiency: ≤95% (efficiency and input, output voltage,
- current, pressure difference)
- Installation: 4pcs 3mm column
- Connection mode: welding output (please use big current and pure copper wire)
- Module size: 130mmx52mmx46mm(LxWxH)
Reviews
There are no reviews yet.