i11 TWS Wireless Touch Sensor Earbuds With Charging Case For iOS And Android
Overview:
Bluetooth Version: Dual-mode Bluetooth V5.0 + EDR, ultra-low power consumption
Support protocol: A2DP1.3/HEP1.6/HSP1.2/AVRCP1.6/D11.3
Bluetooth Usage Band: 2.4 GHZ
Bluetooth transmission distance: 15-25 meters
Battery capacity: headphones: 30 mAh, charging bin: 300 mAh
Standby time: 6 hours for TWS earphones
Call/playback time: earphone playback time: about 2-3 hours, earphone call time: about 4 hours
(support telegram number, iOS system power display
Operation Manual:
1. Turn on the charging box switch (blue or red lights on).
2. Open the top cover of the charging box and take out the headphones. The headphones are
automatically turned on and matched.(Important hint: Turning on the charging box switch before turn on
the charging box is the prerequisite for the automatic boot-up of headphones).
3. Pairing with other devices: Turn on Bluetooth settings for mobile phones or other devices-Search
for Bluetooth name “i11” and click Connect Bluetooth.
4. The headphones are put into the charging box to enter the charging mode, and the
headphones are turned off automatically.
5. i11 Tws wireless headset left and right headphones can be separately connected.
6. i11 Tws wireless headphones will automatically shut down if they are not connected
to Bluetooth devices for 5 minutes.
Headphone Touch Function:
1. Touch the position of the left ear and the right ear and answer the phone with one touch. The volume of
the left earphone decreases with two touch. The right earphone increases with two touch. The left earphone
clicks the next song with three clicks. The right earphone clicks the last song with three clicks. Long press
function of 3 seconds, long press switch of 5 seconds, two headphones call at the same time.
2. Turn on the phone after shutdown, and the headphones automatically connect to the mobile phone.
3. The whole machine has voice prompts.
4. Headphones have sound in both ears for two-channel calls.
5. The playing time of earphone music is about 2-3 hours, the calling time is about 4 hours,
and the standby time is about 6 hours.
6. Battery capacity of charging seat is 300mAh and headphone battery capacity is 35mAh.
7. Charging time is 70 minutes.
8. Charging voltage of charging box is 5V.
9. The charging box takes one hour and has a capacity of 300 mAh. The charging red light
flashes and is full of charged is constant light.
10. The charging box can charge the earphone about four times.
11. When the headset is charged, the red light is always on and the full light is turned off.
12. The blue light is always on when the charging box charges the earphone.
(i11S-TWS)Package including:
2 X Bluetooth Earbuds
1 X Charging Box
1 X Charging Cable
1 X User Manual
i11 TWS Wireless Touch Sensor Earbuds With Charging Case For iOS And Android
₨ 900 ₨ 850
i11 TWS Wireless Touch Sensor Earbuds
Bluetooth Version: Dual-mode Bluetooth V5.0 + EDR, ultra-low power consumption
Support protocol: A2DP1.3/HEP1.6/HSP1.2/AVRCP1.6/D11.3
Bluetooth Usage Band: 2.4 GHZ
Bluetooth transmission distance: 15-25 meters
Battery capacity: headphones: 30 mAh, charging bin: 300 mAh
Standby time: 6 hours for TWS earphones
Call/playback time: earphone playback time: about 2-3 hours, earphone call time: about 4 hours
(support telegram number, iOS system power display
6 in stock
SKU:
2478
Categories: Accessories and Parts, Bluetooth Head Phone and Hand Free, Consumer Electronics, Other Electronics, Phone & Accessories, Phones
Description
Additional information
Weight | 0.15 kg |
---|
Reviews (0)
Reviews
There are no reviews yet.
Related products
Dual axis XY Joystick Module For Arduino projects
SKU:
1024
Micro SD Card Mini TF Card Reader Module Spi Interfaces Arduino
SKU:
1057
Module features are as follows:
1. Supports Micro SD cards, Micro SDHC card (high speed card)
2 level conversion circuit board that interfaces level for 5V or 3.3V
3 power supply is 4.5V ~ 5.5V, 3.3V voltage regulator circuit board
4 is a standard communication interface SPI interface
5.4 M2 screw positioning holes for easy installation
Square LED 8X8 Common Dots Matrix Module Arduino
SKU:
1025
Digital LCD Vernier Caliper 6 inches Gauge Carbon Fiber Micrometer
SKU:
1081
₨ 1,050
UNO Proto shield prototype expansion board SYB-170 mini board
SKU:
1013
Used in conjunction with the Duemilanove ProtoShield prototype expansion board, the circuit is used to build a prototype, can be directly soldered components on the board, you can also connect the above mini breadboard circuit. Bread board and circuit board via double-sided adhesive connections, sold bread board and the circuit board are separated.
ProtoShield prototype expansion board with two buttons and two LED circuit can be used directly, all of the pins and the power leads are very fit and build circuit prototyping with Ardui-no.
MT3608 2A Max DC-DC Step Up Power Module Booster Power Module
Active Components, Integrated Circuits, Consumer Electronics, Other Electronics, Voltage Converters and Power Supplies
SKU:
1097
₨ 170
LCD Display Module Blue Backlight for Arduino LCD1602 IIC I2C TWI 1602 Serial
SKU:
1011
₨ 1,050
Be the first to review “i11 TWS Wireless Touch Sensor Earbuds With Charging Case For iOS And Android”