LTC3780 DC 5-32V to 1V-30V 10A automatic pressure lifting power/constant voltage constant current CV and CC 12V24v voltage/car/solar charging





LTC3780 DC 5-32V to 1V-30V 10A automatic cc/cv constant current constant voltage buy in Pakistan
PKR 2,200 PKR 2,100
Input voltage: DC5-32V;
Output voltage: DC1V-30V continuously adjustable; the default 12V shipment
Output current: 10A (MAX) ,long term within 8A
Output power: 80W, peak 130W, more than 80W please strengthen heat dissipation
Output ripple: 50mV (12V turn to 12V, 5A measured)
Short circuit protection:YES
Out of stock
Compare
SKU:
1104
Categories: Active Components, DIY Projects, Electronic Components, Integrated Circuits
Description
The power supply is a high efficiency voltage regulator power supply module, the input voltage is lower than, higher than the output voltage, the output voltage can remain stable. For example, the output is 12V, then the input voltage varies between 5 ~ 32V, the output voltage regulator in the 12V. This module has perfect protection function, can be applied to solar charge.
Advantage:
Circuit board with 1.6 thick gold plating process;
Input can be replaced by the replacement of the insurance tube, the protection of power and equipment;
The whole electrolysis adopts imported SMD, low resistance, high frequency capacitance, the ripple down to the freezing point;
IC imported from Linear;
Constant voltage, constant current, under voltage protection (MPPT is more suitable for solar charge)
Output error indicator, output voltage drift is too serious, such as the failure of the short circuit;
Electrical parameters:
Input voltage: DC5-32V;
Output voltage: DC1V-30V continuous adjustable; the default 12V delivery, such as the need for other voltage, please take note;
Output current: less than 8A, the peak value of 10A, the default 5A delivery, such as the need for other current please take notes;
Output power: long-term 80W, peak 130W, more than 80W, please strengthen cooling;
Output ripple: 50mV (12V, 5A, 12V)
Input back protection: No, if required, please connect the diode in the output terminal
Output: no need, such as anti backflow charging, please at the output diode in series
Operating temperature range: -45 c ~ +85c;
Size: 77.6*46.5*15mm
Description of the use of LTC3780 constant current under pressure protection plate
Welcome to purchase the use of our voltage module, please read the following instructions carefully, or due to the use of improper use of damage, the company will not be guaranteed, replacement.
This module belongs to the automatic lifting power supply, the input voltage is lower than the output voltage, and the output voltage can be kept stable. For example, set the output of 12V, input voltage in 5 ~ 32V between changes, output voltage is 12V constant; constant current, constant pressure, under voltage protection and output instructions, fault indication function output had over-current, over-voltage, short circuit protection; all the components can achieve industrial scale should be used; can be perfect for use in a variety of occasions, such as charging, high power LED drive, power supply equipment, vehicle power supply and so on.
Package: 1Pcs* LTC3780
Additional information
Weight | 0.042 kg |
---|
Reviews (0)
Rated 0 out of 5
0 reviews
Rated 5 out of 5
0
Rated 4 out of 5
0
Rated 3 out of 5
0
Rated 2 out of 5
0
Rated 1 out of 5
0
Be the first to review “LTC3780 DC 5-32V to 1V-30V 10A automatic cc/cv constant current constant voltage” Cancel reply
Related products
5v Micro USB 1A TP4056 Charging Board Module
SKU:
1061
433mhz rf wireless receiver transmitter module kit
SKU:
1031
PKR 210
DC-DC LM2596 Step-down Adjustable Module CC-CV
Electronic Components, Active Components, DIY Projects, Integrated Circuits, Voltage Converters and Power Supplies
SKU:
1022
PKR 350
Fixed turn the lamp current to 0.1 times the value of the constant current (charge when used to identify whether the battery is full);
2. Increased input reverse polarity protection diode;
3. Using dedicated reference IC, and high-precision sampling resistor, so that the constant current is more stable, (20 degrees to 100 degrees, the constant current 1A, when the temperature drift of less than 1%).Particularly suitable for LED driver
*High-power LED constant current drive
*Lithium battery charger (including ferroelectric)
4-Phase Stepper Motor and Driver Board ULN2003 Module Arduino
SKU:
1018
PKR 350
RFID Module RF IC RC522 Kits 6cm With Tag
SKU:
1008
PKR 350
13.56MHz contactless communication card chip
Low-voltage, low-cost, small size of the non-contact card chip to read and write
Smart meters and portable handheld devices developed better choice
The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz
MB102 Breadboard Power Supply Module 3.3V 5V Bread Board
SKU:
1058
PKR 180
Brand new & high quality
Breadboard power supply module, compatible with 5 V, 3.3 V
Apply to MB102 breadboard
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V can switch over
Maximum output current: <700 ma
Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V
Reviews
Clear filtersThere are no reviews yet.