Car Vehicle Bike Tools and Accessories
MH-CD42 DC 5V 2.1A Charge / Discharge (Boost) Battery Protection 4.2V 3.7 buy in Pakistan
PKR 250
In stock
کسٹمر کو رقم ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے
| Weight | 0.03 kg |
|---|
On Sale Products
Related products
5A XL4015 DC-DC DSN5000 Adjustable Step Down Module with heat sink
Electronic Components, Active Components, Integrated Circuits, Voltage Converters and Power Supplies
SKU:
1178
In stock
DIY mobile power, car power, communications equipment and power supply.
Technical Parameters:
Module Properties: Non-isolated step-down module (BUCK)
Rectification: Non-synchronous rectifier
Input voltage: DC 5V-30V
Output voltage: DC 0.8V-24V (Adjustable, Output < Input)
Output current:Rated current is 2.5A,(5A Max, If current is larger than 2.5A, eEnhancement of heat dissipation is required.)
3V to 5V to 9V 2A USB Output Voltage Step-up Module Boost Converter
Electronic Components, Active Components, Integrated Circuits, Voltage Converters and Power Supplies
SKU:
1177
In stock
Note:Output voltage must be higher than Input Voltage
Input Voltage:2-6V(less than 3V,output power cut down)
Output Voltage:3.3V-9V adjustable(Input voltage must less than output voltage)
Output Current:Rated 2000mA (2.8V-3V input, 5V output, 1500MA output,(single lithium battery higher 2600MAH input,5V output, output current can up to 2000MA)
Note:Output voltage higher than 6V,Please connect power first,then connect load line
Soil moisture sensor Soil Hygrometer Humidity Detection module
SKU:
1176
In stock
soil humidity module to the environmental humidity is the most sensitive, generally used to detect soil moisture.
module in soil moisture can not reach the setting threshold, DO mouth output high level, when soil moisture more than setting threshold, module D0 output low level;
small plate digital output D0 can be directly connected with the single chip microcomputer, through the single chip microcomputer to detect the high and low level, thus to detect soil moisture;
TTP223 Touch Switch Button Module Single Channel Self Locking
SKU:
1148
In stock
This module is based on a touch detection IC (TTP223B) of Capacitive type touch jog switch module . This module default output low, the low-power mode to mode; when a finger touching the corresponding position, the module will output high and returns low again touch. Mode is switched to fast mode; when for 12 seconds without touching
ESP8266 esp-01 remote serial Port WIFI wireless module D185
SKU:
1124
In stock
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
+19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
MICRO USB to DIP Adapter 5pin Female Connector B Type PCB Converter
SKU:
1121
In stock
LM2596 DC Adjustable Step-Down 3A Power Supply Module
SKU:
1062
In stock
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
Switching Frequency: 150KHz
Rectifier: Non-Synchronous Rectification
Module Properties: Non-isolated step-down module (buck)
Short circuit protection: current limiting, since the recovery
Operating temperature: Industrial grade (-40 to +85 ) (output power 10W or less)
Full load temperature rise: 40
Micro Servo SG90 9G Eletronic Module RC DIY Kit Robot Motor Tower
SKU:
1041
In stock
XM1584 MP1584EN Ultra-small size DC-DC step-down module 3A adjustable super LM2596
Electronic Components, Active Components, Integrated Circuits, Voltage Converters and Power Supplies
SKU:
1217
In stock
12V 8A Switch Dimmer Brightness Adjustable Controller for DC motor LED Strip Light
SKU:
1189
In stock
Mosfet IRF3205 IRF3205PBF IR TO-220 55V 110A 200W
SKU:
1163
In stock
Continuous Drain Current, VGS @ 10V = 110 A
Pulsed Drain Current = 390 A
At 25°C Power Dissipation = 200 W
Linear Derating Factor = 1.3 W/°C
Gate-to-Source Voltage = ± 20 V
Avalanche Current = 62 A
Repetitive Avalanche Energy = 20 mJ
dv/dt Peak Diode Recovery dv/dt = 5.0 V/ns
Operating Junction and Soldering Temperature, for 10 seconds = 300 (1.6mm from case )°C
Description
Product Description:
MH-CD42 DC 5V 2.1A Charge / Discharge (Boost) Battery Protection 4.2V 3.7 Lithium Indicator Module
Description:
Providing mobile power for your DIY projects has never been easier with the MH-CD42 Power DIY board!
This tiny board offers simultaneous charge and discharge, lithium battery protection, and a 4 level LED
indicator. Connect any kind of 3.7V Lithium battery to have a 5V output with current up to 2.1A.
When charging, the four-level battery indicator starts with one flashing LED, meaning the battery is less
than 25% full. After some time, 2 LED will lit up and the first one would stop flashing. That means your
battery is 25% to 49% full. Your battery is fully charged when all 4 LEDs are lit and not flashing.
In discharge mode, the same definition applies but in reverse.
Product parameters:
Charging voltage: DC4.5V-5.5V (recommended DC5V)
Charging current: 0-2.1 a
Quiescent Charge Current: 100UA
Full voltage: 4.2V ± 1%
Discharge current: 0-3.5A
Quiescent discharge current: 50UA
Discharge efficiency: up to 96%
Output voltage: 5V
Output current: 0-2.1 a
Ambient temperature: -20 ~ + 85 ° C
The module comes with a lithium battery protection function
(for unprotected lithium batteries, with protection board)
Overcurrent Protection (OCP)
Overvoltage Protection (OVP)
Short Circuit Protection (SCP)
Overheating Protection (OTP)
Charge and discharge power level interval indication 4
Pin Description:
VIN: The correct input of the charging port + (DC4.5V-5.5V (DC 5V recommended)
GND: negative input of the charging port-
GND: Lithium battery-
Bat: lithium battery +
GND: Negative output-
Output: positive output +
Key: output trigger port (low pulse trigger)
Package Includes:
1pc x DC 5V 2.1A Charge/Discharge(boost) battery Module
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.