Car Vehicle Bike Tools and Accessories
MPU9250 GYRO ACCELERATOR MAGNETOMETER MODULE 9-AXIS buy in Pakistan
PKR 1,430
Out of stock
کسٹمر کو رقم ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے
| Weight | 0.004 kg |
|---|
On Sale Products
Related products
MT3608 DC-DC Adjustable Step Up Boost Module 2A with MICRO USB LM2577
Electronic Components, Active Components, Integrated Circuits, Voltage Converters and Power Supplies
SKU:
1215
In stock
150W DC-DC Boost Converter 10-32V to 12-35V 6A Step Up Voltage Charger Power
Electronic Components, Active Components, Integrated Circuits, Voltage Converters and Power Supplies
SKU:
1188
In stock
5A XL4015 DC-DC DSN5000 Adjustable Step Down Module with heat sink
Electronic Components, Active Components, Integrated Circuits, Voltage Converters and Power Supplies
SKU:
1178
In stock
DIY mobile power, car power, communications equipment and power supply.
Technical Parameters:
Module Properties: Non-isolated step-down module (BUCK)
Rectification: Non-synchronous rectifier
Input voltage: DC 5V-30V
Output voltage: DC 0.8V-24V (Adjustable, Output < Input)
Output current:Rated current is 2.5A,(5A Max, If current is larger than 2.5A, eEnhancement of heat dissipation is required.)
Soil moisture sensor Soil Hygrometer Humidity Detection module
SKU:
1176
In stock
soil humidity module to the environmental humidity is the most sensitive, generally used to detect soil moisture.
module in soil moisture can not reach the setting threshold, DO mouth output high level, when soil moisture more than setting threshold, module D0 output low level;
small plate digital output D0 can be directly connected with the single chip microcomputer, through the single chip microcomputer to detect the high and low level, thus to detect soil moisture;
Stepper Driver A4988 Module with Heat sink
SKU:
1174
In stock
LM2596 DC Adjustable Step-Down 3A Power Supply Module
SKU:
1062
In stock
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
Switching Frequency: 150KHz
Rectifier: Non-Synchronous Rectification
Module Properties: Non-isolated step-down module (buck)
Short circuit protection: current limiting, since the recovery
Operating temperature: Industrial grade (-40 to +85 ) (output power 10W or less)
Full load temperature rise: 40
L293D Motor Drive Shield for Arduino
SKU:
1051
In stock
Motor Drive Shield L293D for Arduino Duemilanove Mega / UNO
4-channel DC motor drives, stepper motor or 2 while driving two servos, You can mix:
DC motor driver quad and two steering gear
Drive two DC motor and stepper motor all the way and two-way steering gear
Drive two stepper motors and two servos
CMOS CAMERA OV7670 300KP VGA Camera Module
SKU:
1047
In stock
433mhz rf wireless receiver transmitter module kit
SKU:
1031
In stock
DC-DC LM2596 Step-down Adjustable Module CC-CV
SKU:
1022
In stock
Fixed turn the lamp current to 0.1 times the value of the constant current (charge when used to identify whether the battery is full);
2. Increased input reverse polarity protection diode;
3. Using dedicated reference IC, and high-precision sampling resistor, so that the constant current is more stable, (20 degrees to 100 degrees, the constant current 1A, when the temperature drift of less than 1%).Particularly suitable for LED driver
*High-power LED constant current drive
*Lithium battery charger (including ferroelectric)
5V 9V 12V 10A PWM DC Motor Speed Controller LED Dimmer Module Adjustable Speed Regulator
SKU:
1180
In stock
Max voltage: 16V
Minimum voltage: 5V
Continuous current: 10A
Short maximum current: 20A (less than 10 seconds)
Speed control mode: PWM step-less speed regulation, can also be used to adjust the light
Control mode: speed control potentiometer (clockwise clicked open, continue to rotate clockwise from 1% to 99% speed)
Duty cycle: 0%-99% (0% position is the state of the switch off when the potentiometer is most on the left).
When the current is switched on, the 0.002A (long time no need to switch off the governor is no current).
Efficiency: the maximum efficiency is as high as 98%.
Volume: long 3cm (excluding potentiometer), width 2cm, height 1.4cm
XL6009 DC-DC Booster Adjustable Super LM2577 Step-up Module
Electronic Components, Active Components, Integrated Circuits, Voltage Converters and Power Supplies
SKU:
1075
In stock
Description
Product description:
9-AXIS ALTITUDE GYRO ACCELERATOR MAGNETOMETER MODULE MPU9250 9D0F
SPECIFICATIONS:
MPU-9250 modules ( three-axis gyroscope + triaxial accelerometer + triaxial magnetic field )
Use Chip : MPU-9250
Power supply :3-5v ( internal low dropout regulator )
Communication: IIC communication protocol standard
Chip 16bit AD converter 16 outputs the data
Gyro range : ± 250 500 1000 2000 ° / s
Acceleration range : ± 2 ± 4 ± 8 ± 16g
Magnetic field range : ± 4800uT
Using Immersion Gold PCB, machine welding process to ensure quality2.54mm pin pitch
Description:
The MPU-9250 is the company’s second generation 9-axis MotionTracking device for smartphones, tablets, wearable sensors, and other consumer markets. The MPU-9250, delivered in a 3x3x1mm QFN package, is the world’s smallest 9-axis MotionTracking device and incorporates the latest InvenSense design innovations, enabling dramatically reduced chip size and power consumption, while at the same time improving performance and cost.
The MPU-9250 MotionTracking device sets a new benchmark for 9-axis performance with power consumption only 9.3µA and a size that is 44% smaller than the company’s first-generation device. Gyro noise performance is 3x better, and compass full scale range is over 4x better than competitive offerings.
The MPU-9250 is a System in Package (SiP) that combines two chips: the MPU-6500, which contains a 3-axis gyroscope, a 3-axis accelerometer, and an onboard Digital Motion Processor™ (DMP™) capable of processing complex MotionFusion algorithms; and the AK8963, the market leading 3-axis digital compass. The MPU-9250 supports InvenSense’s market proven MotionFusion. A single design can support the MPU-9250 or MPU-6500, providing customers the flexibility to support either device in different product SKUs.
Improvements include supporting the accelerometer low power mode with as little as 6.4µA of and it provides improved compass data resolution of 16-bits (0.15 µT per LSB). The full scale measurement range of ±4800µT helps alleviate compass placement challenges on complex pcb’s
The MPU-9250 software drivers are fully compliant with Google’s Android 4.1 Jelly Bean release, and support new low-power DMP capabilities that offload the host processor to reduce power consumption and simplify application development. The MPU-9250 includes MotionFusion and run-time calibration firmware that enables consumer electronics manufacturers to commercialize cost effective motion-based functionality.
Package Included:
1x 9-SXIS Altitude Gyro Module MPU9250 9D0F
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.