Car Vehicle Bike Tools and Accessories
QC3.0 QC2.0 USB 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board 3V 5V 12V Charging Module buy in Pakistan
PKR 450
In stock
کسٹمر کو رقم ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے
| Weight | 0.007 kg |
|---|
On Sale Products
Related products
MOS Field Effect Transistor Trigger Switch Driver Board
SKU:
3207
In stock
Specification:
1: working voltage: DC 5V--36V;
2: trigger signal source: digital high and low level (DC3.3V--20V), can be connected to the microcontroller IO port, PLC interface, DC power supply, can receive PWM signal, the signal frequency 0--20KHZ perfect support.
3: output: DC DC 5V--36V, continuous current at room temperature 15A, power 400W! Auxiliary heat dissipation, the maximum current up to 30A.
4: application: the output can control high power equipment, motor, bulb, LED lamp belt, DC motor, micro pump, solenoid valve, etc., can enter the PWM, control motor speed, the brightness of the lamp, etc..
5: service life: unlimited switch; working temperature: -40 - 85 C; size: 3.4*1.7*1.2cm
3S 25A Li-ion 18650 BMS PCM Battery Protection Board Balance Lipo Module
SKU:
1711
In stock
Over Charge voltage:4.25-4.35v±0.05v Over Discharge voltage: 2.3-3.0v±0.05v Max Working current:25A Max peak current:35-40A Working temperature:-40---+50 Storage Temperature:-40-- +80 Small current:50uA Life cycle:more then 30000 hours Resistance:Less than 100mΩ Short Cut : Protectable,Charge can repair
2S 8A 7.4V 8.4V Lithium LiPo Cell Li-ion BMS Battery 18650 Protection Board Tool
SKU:
2717
In stock
2S 8A 7.4V 8.4V Lithium LiPo Cell Li-ion BMS Battery 18650 Protection Board Tool
Model: HX2SD01
Over voltage range: 4.25-4.35v?0.05v
Over discharge voltage range: 2.5-3.0v?0.05v
Limited current: 15A
Upper working current: 8A
Quiescent current: less than 10uA
Operating temperature: -40 - +50?
Storage conditions: -40 - +80?
Resistance: less than 300m ohm
Short circuit protection: protection, charge recovery
Usage: 2 string 7.4V lithium Lipo Li-ion 18650 battery phosphate rechargeable battery pack.
Stable performance.
20A 3s li-ion lithium battery 18650 charger 12.6V BMS protection board
SKU:
1555
In stock
2S 3A Li-ion Lithium Battery 7.4v 8.4V 18650 Charger Protection PCB bms pcm
SKU:
1350
In stock
TP5000 4.2V/3.6V 1A Lithium Battery Charging Board Charger Module
SKU:
2825
In stock
TP5000 4.2V/3.6V 1A Lithium Battery Charging Board Charger Module
Features:Charging for Lithium battery(4.2V) and Lithium iron phosphate battery(3.6V)
Type:Voltage Regulator
Supply Voltage:DC 4.5-9V (not exceed 7V)
Model Number:TP5000 Lithium Battery Charger
Condition:New
Application:Electronic Circuit
Input voltage:DC 4.5-9V (not exceed 7V)
Output voltage:DC 4.2V/3.6V (default 4.2V)
Output current:1A (Default max)
LED Indicator:Charging -LED Flashing; Charged-Green
3 USB 5V 2A Mobile Power Bank Lithium Battery Charger Module 3V to 5V Step Up Boost Power Module
SKU:
2767
In stock
3 USB 5V 2A Mobile Power Bank Lithium Battery Charger Module 3V to 5V Step Up Boost Power Module
5V 2A 2.1A Power Bank Battery Charger Module 3 USB Step Up Circuit Board
Apply Battery Type: 18650 battery(not include)
Output Voltage: 5V 2.1A
Input Voltage: 5V 1A
Instructions: Level 4 Capacity indicator
Lighting: with LED lights
Rated Voltage: 3.7V ( Suit for 3.2V-4.2V. The batteries are in parallel)
0.9V ~ 5V to 5V 600MA USB Output Charger Upgrade Module
SKU:
2087
In stock
Single Cell 18650 Lithium Battery Boost QC Fast Charge QC2.0 QC3.0 Module Board 3.7V 4.2V Convert 5V 9V 12V USB Mobile Phone Quick Charging
SKU:
2080
In stock
Single Cell Lithium Battery Boost Power Module Board 3.7V 4.2V Liter 5V 9V 12V USB Mobile Phone QC Fast Charge QC2.0 QC3.0
Product model: AILAVI-180312
Name: Single-cell lithium battery boost fast charging source module
Main control chip: TPS61088A
Identification chip: FP6601Q
Input voltage: 2.8 ~ 4.5V, very suitable for 3.7V polymer lithium battery
Output voltage: The default is 5V, triggering fast charge after 4.5V ~ 12V according to the protocol.
Input rated current: 8A
Output current: 5V3A, 9V2A, 12V2A. Output current is adaptive.
Output power: up to 24W.
Support Agreement: QC2.0, QC3.0, Huawei FCP, DCP Agreement
Efficiency is up to 93%, with a typical value of 90%.
Module size: 47.5 (length) * 16.5 (width) * 8 (height) mm (including USB)
Module net weight: about 7 grams
The FP6601Q chip integrates the HiSilicon fast charge protocol and Qualcomm QC2.0/3.0USB interface fast charge protocol, which can quickly charge devices that support FCP and QC2.0/3.0 protocols. In addition to supporting the USB BC1.2 standard, it also supports FOR Apple and FOR Samsung devices. The chip can automatically detect whether the currently connected device is a QC2.0/3.0 or FCP device to automatically adjust the voltage.
feature of product:
1. Support FCP voltage and current output protocol.
2. Support Qualcomm QC2.0/3.0 classA 5V, 9V, 12V voltage output.
3. Automatically recognize FCP and QC2.0/3.0 fast charge protocol.
4. Support the protocol equipment of Chinese telecom enterprise YD/T 1591.
The TPS61088 is a high power density, fully integrated boost converter with an 11m? power switch and a 13m? rectifier switch that provides an efficient, small form factor solution for portable systems. With a wide input voltage range of 2.7V to 12V, the TPS61088 supports applications with single or two-cell Li-Ion batteries. The device features 10A switching current capability and is capable of delivering output voltages up to 12.6V.
The TPS61088 uses an adaptive constant off-time peak current control topology to regulate the output voltage. The TPS61088 operates in PWM mode under medium to heavy load conditions. Under light load conditions, the device can select one of the following two modes of operation via the MODE pin. One is a PFM mode that increases efficiency; the other is a forced PWM mode that avoids application problems due to low switching frequency. The switching frequency in PWM mode can be adjusted from 200kHz to 2.2MHz with an external resistor. The TPS61088 also implements a programmable soft start function and an adjustable switching peak current limit. In addition, the device is available with 13.2V output overvoltage protection, cycle-by-cycle overcurrent protection, and thermal shutdown protection.
The TPS61088 is available in a 20-pin 4.50mm ? 3.50mm VQFN package.
4S 40A Li-ion 18650 BMS PCM Battery Protection Board Balance Lipo Module 14.8V 16.8V
SKU:
1967
In stock
4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 46 * 60 * 3.4mm (balanced version)
Product weight: 10.3g (balanced version)
Charging voltage: 16.8V - 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 40A
Power Bank Dual USB 5V 1A 2.1A 18650 Battery Charger PCB Accessories
SKU:
1122
In stock
5v Micro USB 1A TP4056 Charging Board Module
SKU:
1061
In stock
Description
QC3.0 QC2.0 USB DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board 3V 5V 12V
Dinspiration:
Output voltage: The default is 5V. After the fast charge is triggered, it is automatically adjusted between 3 and 12V.
Output Power. 24W (5V, 3.4A, 9V, 2.5A, 12V, 2A, etc.)
Output voltage wired compensation
Conversion efficiency: 90% to 97%
Supports multiple fast charging protocols
Input overvoltage, undervoltage protection
Input over-current protection
Output overcurrent and short circuit protection
Over temperature protection
Support fast charging protocol
for BC1.2, iPhone, Samsung agreement
for Qualcomm QC2.O and QC3.O
MTKPEI.1/PE2.O
Fast Charge Protocol FCP
Star Fast Charge Protocol AFC
Spreadtrum Fast Charge Agreement SFCP
Applications
Solar panel to mobile phone charging
Car charging retrofit
Driving recorder power supply
Home power conversion
colour:black
Material:Metal + PC
Package Contents:
1PC Quick Charger Circuit Board Module QC3.0 QC2.0 USB DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board 3V 5V 12V
Reviews (2)
2 reviews for QC3.0 QC2.0 USB 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board 3V 5V 12V Charging Module
Only logged in customers who have purchased this product may leave a review.
Haris –
An amazing product, works flawlessly …
Adil khan –
An amazing product