SN74LVC1G3157DBVR 74LVC1G3157 CC5R SOT23-5 Single-Pole Double-Throw Analog Switch buy in Pakistan
PKR 35
SN74LVC1G17DBVR screen printing C175 SOT23 single-channel Schmidt trigger buffer
The 74LVC1G17 provides a buffer function with Schmitt trigger input. It is capable of
transforming slowly changing input signals into sharply defined outputs.
The input can be driven from either 3.3 V or 5 V devices. This feature allows the use of
this device in a mixed 3.3 V and 5 V environment.
This device is fully specified for partial power-down applications using IOFF. The IOFF
circuitry disables the output, preventing the damaging backflow current through the
device when it is powered down.
SN74LVC1G3157DBVR 74LVC1G3157 CC5R SOT23-5 Single-Pole Double-Throw Analog Switch Description:
1 Features 1• ESD Protection Exceeds JESD 22 – 2000-V Human Body Model (A114-A) – 1000-V Charged-Device Model (C101) • 1.65-V to 5.5-V VCC Operation • Qualified For 125°C operation • Specified Break-Before-Make Switching • Rail-to-Rail Signal Handling • Operating Frequency Typically 340 MHz at Room Temperature • High Speed, Typically 0.5 ns (VCC = 3 V, CL = 50 pF) • Low ON-State Resistance, Typically ?6 ? (VCC = 4.5 V) • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II 2 Applications • Wearables and Mobile Devices • Portable Computing • Internet of Things (IoT) • Audio Signal Routing • Remote Radio Unit • Portable Medical Equipment • Surveillance • Home Automation • I2C/SPI/UART Bus Multiplexing • Wireless Charging 3 Description This single channel single-pole double-throw (SPDT) analog switch is designed for 1.65-V to 5.5-V VCC operation. The SN74LVC1G3157 device can handle both analog and digital signals. The SN74LVC1G3157 device permits signals with amplitudes of up to VCC (peak) to be transmitted in either direction. Applications include signal gating, chopping, modulation or demodulation (modem), and signal multiplexing for analog-to-digital and digital-to-analog conversion systems.
Fixed turn the lamp current to 0.1 times the value of the constant current (charge when used to identify whether the battery is full);
2. Increased input reverse polarity protection diode;
3. Using dedicated reference IC, and high-precision sampling resistor, so that the constant current is more stable, (20 degrees to 100 degrees, the constant current 1A, when the temperature drift of less than 1%).Particularly suitable for LED driver
*High-power LED constant current drive
*Lithium battery charger (including ferroelectric)
Adjust the light soft and stable, no flickering
PWM digital dimming, avoid rush current, protect your LED lights
Mainly use to adjust single color LED light lamps and Led Strip
Max voltage: 16V
Minimum voltage: 5V
Continuous current: 10A
Short maximum current: 20A (less than 10 seconds)
Speed control mode: PWM step-less speed regulation, can also be used to adjust the light
Control mode: speed control potentiometer (clockwise clicked open, continue to rotate clockwise from 1% to 99% speed)
Duty cycle: 0%-99% (0% position is the state of the switch off when the potentiometer is most on the left).
When the current is switched on, the 0.002A (long time no need to switch off the governor is no current).
Efficiency: the maximum efficiency is as high as 98%.
Volume: long 3cm (excluding potentiometer), width 2cm, height 1.4cm
Brand new & high quality
Breadboard power supply module, compatible with 5 V, 3.3 V
Apply to MB102 breadboard
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V can switch over
Maximum output current: <700 ma
Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V
Motor Drive Shield L293D for Arduino Duemilanove Mega / UNO
4-channel DC motor drives, stepper motor or 2 while driving two servos, You can mix:
DC motor driver quad and two steering gear
Drive two DC motor and stepper motor all the way and two-way steering gear
Drive two stepper motors and two servos
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
+19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
The 74HC595; 74HCT595 is an 8-bit serial-in/serial or parallel-out shift register with a storage register and 3-state outputs. Both the shift and storage register have separate clocks. The device features a serial input
This module is based on a touch detection IC (TTP223B) of Capacitive type touch jog switch module . This module default output low, the low-power mode to mode; when a finger touching the corresponding position, the module will output high and returns low again touch. Mode is switched to fast mode; when for 12 seconds without touching
SS8050 SOT23-3 y2 smd TRANSISTOR 40v 1.5A (PNP) original JSCJ product
Polarity: PNP
Maximum Collector Power Dissipation (Pc): 0.225 W
Maximum Collector-Base Voltage |Vcb|: 40 V
Maximum Collector-Emitter Voltage |Vce|: 25 V
Maximum Emitter-Base Voltage |Veb|: 5 V
Maximum Collector Current |Ic max|: 1.5 A
Max. Operating Junction Temperature (Tj): 150 °C
Forward Current Transfer Ratio (hFE), MIN: 200
S8050 SOT23-3 j3y TRANSISTOR (NPN)
FEATURES
Complimentary to S8550
Collector Current: IC=0.5A
MARKING: J3Y
MAXIMUM RATINGS (Ta=25℃ unless otherwise noted)
Symbol Parameter Value Unit
VCBO Collector-Base Voltage 40 V
VCEO Collector-Emitter Voltage 25 V
VEBO Emitter-Base Voltage 5 V
IC Collector Current -Continuous 0.5 A
Reviews
There are no reviews yet.