USB ISP Programmer for ATMEL AVR ATMega ATTiny Board buy in Pakistan
PKR 600
Features:
-This device connects to your computer’s USB port. Not only is it quite compact, but the design is really elegent. The USB interface is achieved by using an atmega processor and the rest is done in firmware.
-With 500mA over-current protection self-recovery fuse, and complete protection of expensive computer motherboard designed for notebook computers, special two 3.6V regulator, a perfect match to level, get rid of the instability of hardware hidden! Target board power mode jumper settings. —–The well-configured firmware, the speed of the unique adaptive technology, stability and obtain the best balance between speed! Supports firmware upgrade unlimited
This device connects to your computer’s USB port. Not only is it quite compact, but the design is really elegent. The USB interface is achieved by using an atmega processor and the rest is done in firmware
With 500mA over-current protection self-recovery fuse, and complete protection of expensive computer motherboard
designed for notebook computers, special two 3.6V regulator, a perfect match to level, get rid of the instability of hardware hidden! Target board power mode jumper settings
The well-configured firmware, the speed of the unique adaptive technology, stability and obtain the best balance between speed! Supports firmware upgrade unlimited
Note:Output voltage must be higher than Input Voltage
Input Voltage:2-6V(less than 3V,output power cut down)
Output Voltage:3.3V-9V adjustable(Input voltage must less than output voltage)
Output Current:Rated 2000mA (2.8V-3V input, 5V output, 1500MA output,(single lithium battery higher 2600MAH input,5V output, output current can up to 2000MA)
Note:Output voltage higher than 6V,Please connect power first,then connect load line
Motor Drive Shield L293D for Arduino Duemilanove Mega / UNO
4-channel DC motor drives, stepper motor or 2 while driving two servos, You can mix:
DC motor driver quad and two steering gear
Drive two DC motor and stepper motor all the way and two-way steering gear
Drive two stepper motors and two servos
5 Colors 5mm F5 Ultra Bright Round LED Diode Kit Red / Green / Blue / White / Yellow
Working current: 20 (mA)
Working voltage: Red: 1.9V-2.1V
Yellow: 1.9V-2.1V
Blue:3.0V-3.2V
Green: 3.0V-3.2V
White:3.0V-3.2V
Adjust the light soft and stable, no flickering
PWM digital dimming, avoid rush current, protect your LED lights
Mainly use to adjust single color LED light lamps and Led Strip
Brand new & high quality
Breadboard power supply module, compatible with 5 V, 3.3 V
Apply to MB102 breadboard
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V can switch over
Maximum output current: <700 ma
Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V
Conversion efficiency: Up to 92% (output voltage higher, the higher the efficiency)
Switching Frequency: 150KHz
Rectifier: Non-Synchronous Rectification
Module Properties: Non-isolated step-down module (buck)
Short circuit protection: current limiting, since the recovery
Operating temperature: Industrial grade (-40 to +85 ) (output power 10W or less)
Full load temperature rise: 40
Stepper Driver A4988 Stepper Motor Driver Module with Heatsink
Low RDS (On) Output
Automatic current decay mode detection / selection
Mix with slow current decay modes
Synchronous rectification for low power dissipation
Internal UVLO
Cross-current protection
3.3 and 5 V compatible logic supply
Universal SetTop Box Power Supply Circuit Board SMPS for Free to Air D2H, DTH, Tata Sky, Set Top Box, Satellite Receiver Etc. Output : DC voltage via 4 pin header(+33V, Gnd, +12V, +24V, Gnd, +5V), SMPS
This is a common 555 timer IC. A classic for all of those first-year circuits projects where you need to blink an LED, generate tone, and thousands of other great beginning projects. Google around for a huge list of resources and example projects.
L9110 motor control chip
Module can be driven by two dc motors at the same time or one phase 4 line 2type stepping motor
Input voltage: 2.5-12V DC
Each channel has a continuous output current 800 ma
PCB Size: 29.2mm x 23mm
Type Designator: IRFB4110
Type of Transistor: MOSFET
Type of Control Channel: N -Channel
Maximum Power Dissipation (Pd): 370 W
Maximum Drain-Source Voltage |Vds|: 100 V
Maximum Gate-Source Voltage |Vgs|: 20 V
Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
Maximum Drain Current |Id|: 180 A
Maximum Junction Temperature (Tj): 175 °C
1. High Efficiency Synchronous Rectification in SMPS
2. Uninterruptible Power Supply
3. High Speed Power Switching
4. Hard Switched and High Frequency Circuits
UTC D313 NPN EPITAXIAL PLANAR TRANSISTOR NPN EPITAXIAL PLANAR TRANSISTOR
The UTC D313 is designed for use in general purpose amplifier and switching applications.
1 TO-220
1:BASE
2:COLLECTOR
3:EMITTER ABSOLUTE MAXIMUM RATINGS PARAMETER Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Storage Temperature Junction Temperature SYMBOL VCBO VCEO VEBO Ic TSTG Tj VALUE 60 60 5 3 -55 ~ +150 150 UNIT V V V A °C °C ELECTRICAL CHARACTERISTICS(Ta=25°C) PARAMETER Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base
Reviews
There are no reviews yet.