Car Vehicle Bike Tools and Accessories
VHM-314 V.20 MP3 bluetooth Audio Receiving and Decoding Board 5.0 Lossless Decoder Amplifier Module buy in Pakistan
PKR 670
In stock
کسٹمر کو رقم ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے
| Weight | 0.05 kg |
|---|
On Sale Products
Related products
SN74HC595N 74HC595N 74HC595 DIP-16 SHIFT REGISTER IC
SKU:
1184
In stock
5A XL4015 DC-DC DSN5000 Adjustable Step Down Module with heat sink
Electronic Components, Active Components, Integrated Circuits, Voltage Converters and Power Supplies
SKU:
1178
In stock
DIY mobile power, car power, communications equipment and power supply.
Technical Parameters:
Module Properties: Non-isolated step-down module (BUCK)
Rectification: Non-synchronous rectifier
Input voltage: DC 5V-30V
Output voltage: DC 0.8V-24V (Adjustable, Output < Input)
Output current:Rated current is 2.5A,(5A Max, If current is larger than 2.5A, eEnhancement of heat dissipation is required.)
Soil moisture sensor Soil Hygrometer Humidity Detection module
SKU:
1176
In stock
soil humidity module to the environmental humidity is the most sensitive, generally used to detect soil moisture.
module in soil moisture can not reach the setting threshold, DO mouth output high level, when soil moisture more than setting threshold, module D0 output low level;
small plate digital output D0 can be directly connected with the single chip microcomputer, through the single chip microcomputer to detect the high and low level, thus to detect soil moisture;
ESP8266 esp-01 remote serial Port WIFI wireless module D185
SKU:
1124
In stock
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
+19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
HC-05 HC05 Bluetooth JY-MCU 6 Pin Module
SKU:
1069
In stock
MB102 Breadboard Power Supply Module 3.3V 5V Bread Board
SKU:
1058
In stock
Brand new & high quality
Breadboard power supply module, compatible with 5 V, 3.3 V
Apply to MB102 breadboard
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V can switch over
Maximum output current: <700 ma
Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V
L293D Motor Drive Shield for Arduino
SKU:
1051
In stock
Motor Drive Shield L293D for Arduino Duemilanove Mega / UNO
4-channel DC motor drives, stepper motor or 2 while driving two servos, You can mix:
DC motor driver quad and two steering gear
Drive two DC motor and stepper motor all the way and two-way steering gear
Drive two stepper motors and two servos
DC-DC LM2596 Step-down Adjustable Module CC-CV
SKU:
1022
In stock
Fixed turn the lamp current to 0.1 times the value of the constant current (charge when used to identify whether the battery is full);
2. Increased input reverse polarity protection diode;
3. Using dedicated reference IC, and high-precision sampling resistor, so that the constant current is more stable, (20 degrees to 100 degrees, the constant current 1A, when the temperature drift of less than 1%).Particularly suitable for LED driver
*High-power LED constant current drive
*Lithium battery charger (including ferroelectric)
12V 8A Switch Dimmer Brightness Adjustable Controller for DC motor LED Strip Light
SKU:
1189
In stock
Mosfet IRF3205 IRF3205PBF IR TO-220 55V 110A 200W
SKU:
1163
In stock
Continuous Drain Current, VGS @ 10V = 110 A
Pulsed Drain Current = 390 A
At 25°C Power Dissipation = 200 W
Linear Derating Factor = 1.3 W/°C
Gate-to-Source Voltage = ± 20 V
Avalanche Current = 62 A
Repetitive Avalanche Energy = 20 mJ
dv/dt Peak Diode Recovery dv/dt = 5.0 V/ns
Operating Junction and Soldering Temperature, for 10 seconds = 300 (1.6mm from case )°C
XL6009 DC-DC Booster Adjustable Super LM2577 Step-up Module
Electronic Components, Active Components, Integrated Circuits, Voltage Converters and Power Supplies
SKU:
1075
In stock
2 CHANNEL 5v RELAY Module 2-channel
SKU:
1042
In stock
Description
Product Description:
VHM-314 V.20 MP3 bluetooth Audio Receiving and Decoding Board 5.0 Lossless Car Audio Decoder Amplifier Module
VHM-314 version
1 parameter characteristics
3.7-5V power supply
SNR 90dB
THD + N-70dB
Crosstalk-86dB
DNR 91dB
Support profile A2DP / AVCTP / AVDTP / AVRCP / HFP
LOS> 15 m
Feature:
Name: MP3 Bluetooth decoder board
Model: VHM-314 V.20
Input voltage: 5V
Two-color indicator: red, blue
Working current: 20ma, maximum charging current 300ma
Support lithium battery charging
Bluetooth version: 5.0
L: Left channel output
R: right channel output
G: Common ground interface (shared with power amplifier / headphone)
2 Details interface
Powered by USB Universal Micro USB 5V Power Supply
3.7-5V external power supply 3.7-5V lithium battery Power Conversion
LED indicator Bluetooth mode long blue light
3.5mm stereo audio interface, standard 3.5mm interface, stereo output sound source, plug-in headphones,
connection amplifiers and other devices
Instructions:
After turning on the power, the blue indicator lights up and enters Bluetooth mode; The “English Bluetooth device is ready
to pair” is displayed, indicating that the Bluetooth mode is entered and waiting for pairing; The searched VHM-314
searched searched by the Bluetooth mobile phone is the device name of the decoding board. Click the connection, the
decoder board indicates “The bluetooth device is connected correctly”, indicating that the decoder board and mobile
phone are connected correctly, you can play music.
Package includes:
1 x VHM-314 V.20 MP3 bluetooth 5.0 Audio Receiving and Decoding Board
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.