QC2.0/3.0 Automatic USB Tester Voltage Ammeter Quick Charger Power Bank Voltage Trigger
The latest development of our company is the qc3.0qc2.0 fast charge tester, with the aim of solving the
test without real cells and aging problems.
Qc2.0, with input voltage of 3-31 V, supports 5 V, 9 V, 12 V, 20 V;
There are 3 modes of operation:
Application: Apply to the latest External Fast Charging Battery, car charger, power adapter, aging volume production
Manual mode: when the test panel is connected to the productions, the default output voltage is 5 V,
press the button to change the output voltage and the corresponding LED lights up. If this process does
not work, the 5V, 9V, 12V, 20V LEDs blinked together for 3 times, and then return to 5V by default.
Automatic mode: when the test panel is connected to the productions, press the button for 3 s
and switch to automatic mode, 5 V, 9 V, 12 V, 20 V LED indicators blinked together for 3 times, then
5 V illuminated . In this mode, each voltage changes every 2 s.
QC3.0 mode: Press the button and hold 3 seconds, QC3.0 blink 3 times, in this state,
IC automatically adjusts to the load as optimal power state, switch to the next file for 0.2v.
This function requires production and load both have qc3.0 protocol.
1. PCBA uses intelligent detection to detect the QCOM protocol QC2.0-QC3.0 to choose the output voltage;
2. Fully compatible with all charges of QC2.0-QC3.0 QCOM and QCOM QC2.0-QC3.0 external battery in the market;
3. Through the button, choose the correct output voltage, relatively LED indicators up;
4. Do not drop the line and the measurement data is accurate;
5. It is used to produce: to make production test data more robust, make sure there are 100% high quality products.
6. Used for sale: comfort, speed, light, beauty, generous
7. Professional, attentive, protective, get automatic tests for batches of productions
and connects perfectly to the electronic load.
USB female port output.
QC 2.0 5V/9V/12V trigger voltage.
Supports Manual mode and Auto mode.
Manual mode: Short press for trigger voltage switch.
Auto mode: Long press enter auto mode, trigger voltage will repeat in the sequence of 5V to 9V to 12V.
For test charger and power bank that support QC2.0 output.
1PC QC2.0/3.0 Automatic USB Tester Voltage Trigger
People who viewed this product also viewed
1.3 inch IPS HD TFT ST7789 IC unit 240*240 SPI communication 3.3V voltage SPI interface full color LCD OLED displayPKR 480.00
Regular Price: PKR 130.00
Special Price PKR 50.00As low as: PKR 36.50