Torch lens 23mm High Power LED Lens Reflector Collimator for flash light in Pakistan

Max voltage: 16V Minimum voltage: 5V Continuous current: 10A Short maximum current: 20A (less than 10 seconds) Speed control mode: PWM step-less speed regulation, can also be used to adjust the light Control mode: speed control potentiometer (clockwise clicked open, continue to rotate clockwise from 1% to 99% speed) Duty cycle: 0%-99% (0% position is the state of the switch off when the potentiometer is most on the left). When the current is switched on, the 0.002A (long time no need to switch off the governor is no current). Efficiency: the maximum efficiency is as high as 98%. Volume: long 3cm (excluding potentiometer), width 2cm, height 1.4cm

Two selectable differential input channels. There is no programming needed for the internal registers. All controls to the HX711 are through the pins. Simultaneous 50 and 60Hz supply rejection. Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA. Operation supply voltage range: 2.6 ~ 5.5V. Operation temperature range: -40 ~ +85℃.