3s 10A BMS li-ion lithium battery 18650 12V BMS protection
SKU:
1825
In stock
Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries)
Product Size: 64mmx20mmx3.4mm
Material:Metal
Charging voltage: 12.6V
Maximum output current: 10A
Maximum output power / charging power: 252W
Select options
This product has multiple variants. The options may be chosen on the product page
XS 4S F100A Bms 3.2V Lifepo4 4s 14.4v 100a Dc
SKU:
3432
In stock
- 100A continuous and 120A peak discharge capability for high-load applications
- Full protection suite: overcharge, over-discharge, overcurrent, short-circuit
- Balance charging keeps cells at equal voltage (~65 mA balance current)
- Ultra-low standby consumption (<30 µA) — energy-efficient for long use
- Compact PCB (7 × 6 cm) fits small enclosures cleanly
- Built for DIY & active projects: e-bikes, solar energy, power tools, UPS units
3s 4s 5s Bms 12v 16.8v 18v 3.2v 100a Bms For Lifepo4 Lithium Iron Phosphate Lithium Battery Protection Circuit Board
SKU:
3429
In stock
- Versatile Protection: Safeguards against overcharge, over-discharge, short circuits, and extreme temperatures.
- High Current Capacity: Capable of managing a discharge current of up to 100A, suitable for high-demand applications.
- Configurable for 3S, 4S, or 5S Battery Packs: Easily customizable to fit your specific battery setup.
- Accurate Voltage Monitoring: Continuously tracks battery voltage to ensure peak performance.
- LED Indicators: Offers visual cues regarding battery status and the charging/discharging process.
3S 25A BMS Li-ion Lipo PCM Battery Protection Balance Module
SKU:
1711
In stock
- Supports 3S (3-series) Li-ion battery configuration (11.1 V nominal)
- 25A continuous discharge with 35–40A peak current capacity
- Built-in protections: overcharge, over-discharge, over-current, and short-circuit
- Integrated balance charging for cell voltage equalization
- Ultra-low standby current (~50 µA) for energy savings
- Compact 56 × 45 mm PCB with long life cycle (>30,000 hours) Xcluma
- Ideal for 18650-based systems like small appliances, LED setups, and solar storage
21V 5S 100A BMS Li-ion LMO Lithium Battery Protection Circuit Board Module
SKU:
2748
In stock
21V 5S 100A BMS Li-ion LMO Lithium Battery Protection Circuit Board Module
5S 21V 100A Battery Protection Board
FOR Li-POLYMER LiMnO Protect Parameter(3.6V/3.7V)
Single cell battery overcharge protect voltage : 4.21-4.29 V
Single cell battery overcharge protect recover voltage : 4.14-4.24 V
Overcharge protect delay : 1.5-2.5S
Single cell battery over-discharge protect voltage : 2.72-2.88 V
Single cell battery over-discharge protect recover voltage : 2.9-3.1 V
Over charge protective current:100A
Over discharge protective current:100A
Over-discharge protect delay : 0.5-1.5S
Temperature protect : Yes,have Temperature control interface.
Disconnect protect : Yes
Shortage protect : Yes
Shortage delay : 100-600 uS
Shortage protect recover mode: Off load release.
Contact discharge current:80A
Synopline discharge current:60A
Charging current:60A
balance function:yes
Ampere balance (Current) : 60MA
Current balance accuracy : 4.14-4.24V
4S 100A BMS 16.8V Lithium Battery BMS Li-ion/LMO Protection, Cell Balancing Module
SKU:
2503
In stock
- Comprehensive Protection: Safeguards against overcharge, over-discharge, short-circuit, overload, and temperature risks
- High Current Support: 100A maximum discharge in single-port mode, 80A in split-port mode
- Balance Charging: Maintains optimal voltage across all 4 cells for consistent battery performance
- Temperature Monitoring: Includes a thermal interface for safe battery operation
- Compact & Reliable: Durable PCB design for home builds, power tools, or electric vehicle systems
- Multi Chemistry Compatibility: Supports Li-ion (NMC), LMO, and Li-Polymer battery cells
3S BMS 12V 100A Li-ion protection lithium battery circuit board li-polymer balance
SKU:
2502
In stock
3S BMS 12V 100A Li-ion LMO protection lithium battery circuit board
li-polymer balance charging module
18650 battery charging module For lithium polymer protection board (3.7V)
Single cell battery overcharge protection voltage: 4.21-4.29V
Single cell battery overload protection recovery voltage: 4.14-4.24V
Overload protection delay: 1.5-2. 3S
Single cell battery over discharge protection voltage: 2.72-2.88V
Protection against current overload: 100 A
Over current protection: 100 A
Over discharge protection delay: 0.5-1. 3S
Temperature protect: Yes
Disconnect protect: Yes
Scarcity to protect: Yes
Shortage delay: 100-600 EE. USA
Scarcity Protection Recovery: Yes
Charging current: 60A
The current balance: Yes
Ampere (current): 60 mA
Voltage accuracy: 4.14-4.24V
3S 40A BMS Lithium Li-ion Battery Charger Protection Balanced Version
SKU:
2422
In stock
3S 12.6V 40A lithium battery protection board
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 42 * 55 * 3.4mm ( Enhanced Version), 42 * 60 * 3.4mm (Balanced version)
Product weight: 8.8g (enhanced version), 9.8g (balanced version)
Charging voltage: 12.6V - 13.6V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good,
please reduce the load current use)
Continuous charge current (upper limit): 20A
3S 60A Protection Charging Board PCM BMS 18650 Li-ion Lithium Battery for Drill Motor
SKU:
2369
In stock
Charging voltage: 12.6V - 13.6V
Type:enhanced version,balanced version
Model: BMS-60A-3S
Item:Battery Charger Protection Board
Scope of application: Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V
(including 18650, 26650, polymer lithium batteries, no size limit).
Continuous discharge current (upper limit): 60A (If the heat dissipation environment is not good,
please reduce the load current)
Continuous charging current (upper limit): 15A
Enhanced version version: Suitable for electric drills with a starting current of 120A or less and a power of 260W or less.
Balance version: Suitable for electric drills with starting current below 120A and power below 260W, with balanced
charging function.
2S 8A 7.4V 8.4V Lithium LiPo Cell Li-ion BMS Battery 18650 Protection Board Tool
SKU:
2717
In stock
2S 8A 7.4V 8.4V Lithium LiPo Cell Li-ion BMS Battery 18650 Protection Board Tool
Model: HX2SD01
Over voltage range: 4.25-4.35v?0.05v
Over discharge voltage range: 2.5-3.0v?0.05v
Limited current: 15A
Upper working current: 8A
Quiescent current: less than 10uA
Operating temperature: -40 - +50?
Storage conditions: -40 - +80?
Resistance: less than 300m ohm
Short circuit protection: protection, charge recovery
Usage: 2 string 7.4V lithium Lipo Li-ion 18650 battery phosphate rechargeable battery pack.
Stable performance.
4S 20A 14.8V 16.8V Li-ion Lithium 18650 Battery BMS PCM Protection PCB Board
SKU:
2657
In stock
4 series 18650 battery 16.8V 16V 14.8V
14.8V (Li-ion 18650 or li-ion battery rated voltage)
16.8V (full charge voltage of lithium ion battery)
14.4V (nominal voltage of Lipo battery pack)
4S LI-ION BMS parameters:
Overcharge voltage: 4.25-4.35v ? 0.05v
Upper discharge voltage: 2.3-3.0v ? 0.05v
Max. Working current: 10A
Max. Peak current: 20A
Operating temperature: -40 --- + 50
Storage temperature: -40- + 80
Small current: 6uA
Life Cycle: 50000 hours
Resistance: 45m?
6S 22.2V BMS 12A / 14A , 6 packs of 18650 Standard & Balanced PCB
SKU:
2656
In stock
- Compatible with 22.2V (6S) lithium-ion battery packs
- Built-in protection: overcharge, over-discharge, overcurrent & short-circuit
- Standard = affordable & simple, Balanced = optimized life & performance
- Current support options: 12A or 14A
- Reliable PCB design for 18650 cells
- Perfect for DIY battery packs, e-bikes, solar storage, RC projects.
Select options
This product has multiple variants. The options may be chosen on the product page
All kind of (BMS) battery management System with variety of amps according to your needs