Servo SG90
Servo SG90
Click to enlarge

Micro Servo SG90 9G Electronic RC DIY Robot

PKR  380

Micro Servo SG90 9G Eletronico Module RC Boat DIY Kit Robot Motor RC-Micro-Motor Servo Motor Mini Robots Towerpro SG90 9g

Size: 23 X 12.2 X 29 mm

Operating speed: 0.3second/ 60degree

Stall Torque : 1.5kg/cm

Temperature range: 0 ~ +55 degree

Dead band width: 10usec

Operating voltage: 4.2V~6V

Delivery in 1–5 Working Days* i Delivery may take longer in remote or non-main city areas.
Faster delivery available on advance payment.
For queries, contact us on WhatsApp.

کسٹمر کو ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے۔

In stock

×
Total:

10 Days Easy Returns

Shop with confidence

Open Before Payment

Pay only when satisfied

Trusted Since 2016

Your reliable partner

Add to wishlist
SKU: 1041 Categories: ,
Description

  1. 100% Brand new and high quality SG90 9G

  2. Micro Servo SG90 9G Eletronico Module RC Boat DIY Kit Robot Motor RC-Micro-Motor Servo Motor Mini Robots Towerpro SG90 9g

  3. Size: 23 X 12.2 X 29 mm 

  4. Operating speed: 0.3second/ 60degree 

  5. Stall Torque : 1.5kg/cm

  6. Temperature range: 0 ~ +55 degree

  7. Dead band width: 10usec 

  8. Operating voltage: 4.2V~6V 

  9. Fit for ALL kind of R/C Toys

  10. Connector Wire Length 250MM

Package Include:

Blue SG90 9g Mini Micro Servos

Additional information
Weight 0.013 kg
Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related Products

-32%
DT3 USB Cable Tester Data Cable Test

DT3 USB Cable Tester Data Cable Test (Black)

SKU: 3415

In stock

Original price was: PKR  850.Current price is: PKR  580.
Model: DT3 Data Cable Detection βoard Type: Data Cable Detection Board Tester current input Port: Type C Testing Cable in put Port: Type "A" & Type "C" Testing Cable output Port: Micro USB , Type C , IOS Interface Type: USB /Type-C 1 /Type-C 2 /Micro /Lighting
Add to wishlist
Add to cart
Quick view
Two-position two-way solenoid valve normally open

Two-position two-way solenoid valve normally open DC3V-5V electric

SKU: 3400

In stock

PKR  300

Specifications Of KSV05A:

  • Model: KSV05A
  • voltage: 3 to 5 V DC
  • Leakage: <3 mmHg/min
  • Max pressure: 300 mmHg
  • Type: Normal open
  • Rated life cycle: 30000 cycles @ ON 7s and OFF 5s
  • Resistance: 23+- 10% Ohm
  • weight: 10g
  • Size: 10*12*20 mm
  • Application: Medical device, Laboratory, Environmental solutions, others.
Add to wishlist
Add to cart
Quick view
XL6019 5A DC-DC Step Up Boost Converter

XL6019 5A DC-DC Step Up Boost Converter

SKU: 3396

In stock

PKR  250
1. The XL6019 5A DC-DC Step Up Boost Converter Uses conventional BOOST complete constant voltage output scheme, internal integration of MOSFET, less peripheral devices, low system cost; 2. Wide voltage range input, input voltage up to 35V;the output voltage can be adjusted, and the maximum can be supported by 40V. 3. Built in over temperature protection, over-current protection full set of reliability and protection circuit, high reliability. 4. The system conversion efficiency can reach more than 90%, which is convenient for thermal design. 5.  TO263-5L standard package, suitable for boosting applications within 30W.
Add to wishlist
Add to cart
Quick view

PCB TERMINAL BLOCK 3 POLES SCREW LESS

,
SKU: 3328

In stock

PKR  25
Length [ l ]: 16.2 mm Pitch: 5.08 mm (0.200") Width [ w ]: 15.2 mm Constructional height: 12.92 mm Height [ h ]: 16.22 mm Pin dimensions     0,5 x 1 mm Pin spacing: 10.16 mm Wire Termination: Screw-less - Spring Cage, Tension Clamp Mounting Type: Through Hole Features: Lever Actuated Hole diameter: 1.3 mm Nominal current IN: 12 A Maximum load current: 12 A (with 1.5 mm² conductor cross section) Insulating material: PA Flammability rating according to UL 94: V0 Stripping length: 10 mm
Add to wishlist
Add to cart
Quick view

KY-010 PHOTO INTERRUPTER MODULE

SKU: 3327

In stock

PKR  250
The KY-010 Photo Interrupter module is a switch that will trigger a signal when light between the sensor’s gap is blocked.This module is suitable for various electronics platforms like Arduino, Raspberry Pi, ESP32 and others.
Add to wishlist
Add to cart
Quick view

FC-33 10mm Arduino RPM Sensor Rotational Speed Measuring Sensor

,
SKU: 3286

In stock

PKR  120
  1. Using imported groove optical coupling sensor, width 5mm.
  2. It have the output state light, if output high level, the lights are off. if output low level ,it on.
  3. If it covered,it will output high level;otherwise it output low level.
  4. Good signal and waveform, with strong driving ability for more than 15mA.
  5. The working voltage of 3.3V to 5V.
  6. Output: digital switch output (0 and 1).
  7. Equipped with a fixed bolt hole, easily install.
  8. Small board PCB size: 3.2 cm x 1.4 cm.
  9. Use the LM393 wide voltage comparer.
 
Add to wishlist
Add to cart
Quick view

MOS Field Effect Transistor Trigger Switch Driver Board

SKU: 3207

In stock

PKR  400
Specification: 1: working voltage: DC 5V--36V; 2: trigger signal source: digital high and low level (DC3.3V--20V), can be connected to the microcontroller IO port, PLC interface, DC power supply, can receive PWM signal, the signal frequency 0--20KHZ perfect support. 3: output: DC DC 5V--36V, continuous current at room temperature 15A, power 400W! Auxiliary heat dissipation, the maximum current up to 30A. 4: application: the output can control high power equipment, motor, bulb, LED lamp belt, DC motor, micro pump, solenoid valve, etc., can enter the PWM, control motor speed, the brightness of the lamp, etc.. 5: service life: unlimited switch; working temperature: -40 - 85 C; size: 3.4*1.7*1.2cm
Add to wishlist
Add to cart
Quick view

MQ Gas Sensor Holder

, ,
SKU: 3151

In stock

PKR  200
1, the use of high-quality double-panel design, with power indicator and TTL signal output instructions;
2, with DO switch signal (TTL) output and AO analog signal output;
3, TTL output valid signal is low. (When the output low signal lights, can be directly connected to the microcontroller or relay module)
4, the analog output voltage, the higher the higher the voltage the higher the voltage.
5, the alcohol detection has a better sensitivity.
6, there are four screw holes to facilitate positioning;
7, product dimensions: 35.5 (L) * 22.5 (W) * 23 (H)
8, with long service life and reliable stability
9, fast response to recovery features
Electrical performance:
Input voltage: DC5V Power consumption (current): 150mA
DO output: TTL digital 0 and 1 (0.1 and 3.3V)
AO output: 0.1-0.3V (relatively no pollution), the maximum concentration of about 4V voltage
Special reminder: the sensor power, the need to preheat 20S or so, the measured data was stable, the sensor fever is a normal phenomenon, because the internal electric wire, if the hot is not normal.
Wiring:
1, VCC: then the power supply positive (5V)
2, GND: Connect the power supply negative
3, DO: TTL switch signal output
4, AO: analog signal output
Add to wishlist
Add to cart
Quick view

SD6835 PWM+PFM controller with built-in transistor DIP8

, , ,
SKU: 3135

In stock

PKR  140
The SD6835 DIP-8 controller is made in a rectangular case and has two rows of pins, in the amount of eight pieces, four pieces on each side, which is due to the corresponding type of DIP-8 case. The SD6835 DIP-8 controller is a microcircuit from a number of PWM controllers.
Add to wishlist
Add to cart
Quick view

BD243 Mini Tesla Coil Kit Electronics DIY Parts Wireless Transmission DIY Board Set

,
SKU: 2653

In stock

PKR  850
BD243 Mini Tesla Coil Kit Electronics DIY Parts Wireless Transmission DIY Board Set This product is newly developed. The primary coil is already in the PCB board. It does not need to be wound on the outside. It is convenient for fans to install, high efficiency and beautiful. It is a new design. If you choose DIY Tesla Coil Kit parts, soldered and assembled by yourself. Input voltage: 9-12V, can be started with 9V battery, but if there is an arc, the working voltage needs 12V. PCB board size: 3.1x4cm/1.22x1.57inch Color: As shown Quantity: 1
Add to wishlist
Add to cart
Quick view

LCD LED TV Back light Universal Lamp Card GYT 0406

SKU: 3127

In stock

PKR  590
  • 100% Hi-Pot tested
  • 100% cycling Burin-in
  • Over temperature protection
  • Overload Protection
  • CCFL inverter for backlight of TFT/LCD monitors
  • Widely used in Computer, Car, TV, POS, etc.
  • saving power
Add to wishlist
Add to cart
Quick view

OH 137 OH137 Hall Effect Unipolar Sensor

SKU: 3057

In stock

PKR  40
OH 137 OH137 Hall Effect Unipolar Sensor
Add to wishlist
Add to cart
Quick view

44E HALL EFFECT SENSOR

SKU: 3051

In stock

PKR  60
Size: approx. 1.85 x 0.3cm/ 0.73" x 0.12" HALL EFFECT SENSOR 44E Hall Sensor Supply Voltage: 4.5-28V; Output Current: 25mA 3.5V to 24V DC operation voltage Low current consumption Temperature compensation Wide operating voltage range Open-Collector pre-driver 50mA maximum sinking output current
Add to wishlist
Add to cart
Quick view

STI8036BE S8036BE S8036 STI8036 SOP-8 Power IC

, , , ,
SKU: 3050

In stock

PKR  60
STI8036BE S8036BE S8036 STI8036 SOP-8 Power IC
Add to wishlist
Add to cart
Quick view

CJMCU- 9548 TCA9548 1-to-8 8 way I2C 8-channel Multiplexer board IIC module

, ,
SKU: 2991

In stock

PKR  570
2V to 6V operation ?On? resistance: 70 Ohms @ 4.5V 6ns break-before-make @ 4.5V Wide operating temperature range: -55C to 125C Function: gathering all the way ADC 16 analog signals. Use CD74HC4067 16-channel analog signal switch Analog Input: C0-C15 16 channels Analog output: DIG Channel Control: S0-S3
Add to wishlist
Add to cart
Quick view