Car Vehicle Bike Tools and Accessories
QC2.0 QC3.0 Automatic USB Trigger Tester Voltage Ammeter Quick Charger Power Bank Voltage buy in Pakistan
PKR 650
In stock
کسٹمر کو رقم ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے
| Weight | 0.1 kg |
|---|
On Sale Products
Related products
XD-82B 12V battery 4 section electricity indicator module board load E2V4
SKU:
1789
In stock
DC 100V 50A Red Blue Digital Voltmeter Ammeter 2 in1 DC Volt Amp Meter With Shunt
SKU:
1746
In stock
Operating voltage:DC 4 ~ 30V
Measure voltage: DC 0 ~ 100V
Minimum resolution(V): 0.1V
Measure current :50A (require external shunt)
Minimum resolution(A): 0.1A
Operating current: <20mA
Display: three 0.28" LED digital tube
Display color: Red and Blue (two-color display)
Refresh rate: about 300mS / times
Measure accuracy: 1% (± 1 digit)
Operating temperature: -10 to 65° c
Operating Humidity: 10 to 80% (non-condensing)
Working pressure: 80 to 106 kPa
Applications:Suitable for automotive/electric cars/motorcycles battery monitoring or other products voltage current measurement
Flysky FS-i6 FS I6 2.4G 6ch RC Transmitter with Receiver For RC Helicopter Plane Quadcopter Glider
SKU:
1304
In stock
RF specification:
RF Range: 2.405 - 2.475GHz
Bandwidth: 500khz
RF Power: less than 20dBm
RF mode: AFHDS 2A
Modulation type: GFSK
RX Sensibility: -105dBm
Receiver specification:
Channel: 6
Model type: fixed wing/helicopter/glider
RF receiver sensitivity: -105dBm
Modulation: GFSK
System type: AFHDS2A/AFHDS
Channel resolution: 1024 steps
Bind port: yes
Power port: yes( VCC)
Power: 4V -6.5V DC
Weight: 6.4g
Antenna lenght: 26mm
Size: 40.4 x 21.1 x 7.35 mm
Clear Acrylic Case Shell Housing For ESR SCR/MOS / LCR-T4 Transistor Tester
SKU:
1235
In stock
DC 0V-100V Mini 0.28 inch Red LED Digital Voltmeter 3 wire
SKU:
1186
In stock
Specifications:
- 2 line working voltage: 4.0~40V (with reverse connection protection function)
- 2 wire detection voltage: 0.0~40V
- 3 line working voltage: 4.0~40V (with reverse connection protection function)
- 3 wire detection voltage: 0.0~100V
- Operating current: <20mA
- Display: 0.28, “LED”, red
- Size: 33 x 10.7 x 8.2 mm (length * width * height)
- Installing openings: 28.5 * 10 mm
- The measurement rate: more than 200mS/ times
- Measuring accuracy: 3 per thousand
- Extreme working condition
- Low operating voltage: +4.0V
- Maximum operating voltage: +40V
- Operating temperature: -10 ~ +65 DEG C
- Working humidity: 10 ~ 80% (without gel)
- Working pressure: 80 ~ 106 kPa
12V DC voltmeter range 8 – 30V LED Digital Voltage Panel Meter
SKU:
1143
In stock
Square LED 8X8 Common Dots Matrix Module Arduino
SKU:
1025
In stock
6 in 1 AC 100A Digital Voltmeter Ammeter Energy Power Frequency Factor Current Panel Meter Detector
SKU:
2168
In stock
CP2102 WiFi Bluetooth 0.96 inch OLED ESP32 18650 Battery Development Board ESP8266
SKU:
2089
In stock
18650 charging system integrated.
indicate LED inside(Green means full& Red means charging)
Charging and working could be at the same time.
1 Switch could control the power.
1 extra LED could be programmed(Connected with GPIO16[D0])
0.5A charging current
1A output
Over charge protection
Over discharge protection
Full ESP32 pins break out
MP3 module/Card speakers USB MP3 decoding module PCBA board JLH-68016H
SKU:
1951
In stock
OLED Display Module 12864 0.96 Inch 4Pin yellow/ Blue IIC I2C LED For Arduino
SKU:
1934
In stock
The instructions on four needles IIC interface module
Four needles iic interface is relatively simple, only two signal lines
1. The GND power to
2. The VCC power supply is (3 ~ 5.5 V)
3. The SCL OLED D0 feet, for the clock pin in the IIC communication
4. The SDA OLED D1 feet, in the IIC communication pin for the data
0.91 inch OLED display White 12832 IIC 128*32 LCD screen for arduino display device SSD1306
SKU:
1561
In stock
Description
QC2.0/3.0 Automatic USB Tester Voltage Ammeter Quick Charger Power Bank Voltage Trigger
Product Description:
The latest development of our company is the qc3.0qc2.0 fast charge tester, with the aim of solving the
test without real cells and aging problems.
Qc2.0, with input voltage of 3-31 V, supports 5 V, 9 V, 12 V, 20 V;
There are 3 modes of operation:
Manual mode
Automatic mode
Qc3.0 mode
Application: Apply to the latest External Fast Charging Battery, car charger, power adapter, aging volume production
Description function
Manual mode: when the test panel is connected to the productions, the default output voltage is 5 V,
press the button to change the output voltage and the corresponding LED lights up. If this process does
not work, the 5V, 9V, 12V, 20V LEDs blinked together for 3 times, and then return to 5V by default.
Automatic mode: when the test panel is connected to the productions, press the button for 3 s
and switch to automatic mode, 5 V, 9 V, 12 V, 20 V LED indicators blinked together for 3 times, then
5 V illuminated . In this mode, each voltage changes every 2 s.
QC3.0 mode: Press the button and hold 3 seconds, QC3.0 blink 3 times, in this state,
IC automatically adjusts to the load as optimal power state, switch to the next file for 0.2v.
This function requires production and load both have qc3.0 protocol.
Characteristics:
1. PCBA uses intelligent detection to detect the QCOM protocol QC2.0-QC3.0 to choose the output voltage;
2. Fully compatible with all charges of QC2.0-QC3.0 QCOM and QCOM QC2.0-QC3.0 external battery in the market;
3. Through the button, choose the correct output voltage, relatively LED indicators up;
4. Do not drop the line and the measurement data is accurate;
5. It is used to produce: to make production test data more robust, make sure there are 100% high quality products.
6. Used for sale: comfort, speed, light, beauty, generous
7. Professional, attentive, protective, get automatic tests for batches of productions
and connects perfectly to the electronic load.
Specification:
USB female port output.
QC 2.0 5V/9V/12V trigger voltage.
Supports Manual mode and Auto mode.
Manual mode: Short press for trigger voltage switch.
Auto mode: Long press enter auto mode, trigger voltage will repeat in the sequence of 5V to 9V to 12V.
For test charger and power bank that support QC2.0 output.
Package Contains:
1PC QC2.0/3.0 Automatic USB Tester Voltage Trigger
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.