21V 5S 100A BMS Li-ion LMO Lithium Battery Protection Circuit Board Module
SKU:
2748
In stock
21V 5S 100A BMS Li-ion LMO Lithium Battery Protection Circuit Board Module
5S 21V 100A Battery Protection Board
FOR Li-POLYMER LiMnO Protect Parameter(3.6V/3.7V)
Single cell battery overcharge protect voltage : 4.21-4.29 V
Single cell battery overcharge protect recover voltage : 4.14-4.24 V
Overcharge protect delay : 1.5-2.5S
Single cell battery over-discharge protect voltage : 2.72-2.88 V
Single cell battery over-discharge protect recover voltage : 2.9-3.1 V
Over charge protective current:100A
Over discharge protective current:100A
Over-discharge protect delay : 0.5-1.5S
Temperature protect : Yes,have Temperature control interface.
Disconnect protect : Yes
Shortage protect : Yes
Shortage delay : 100-600 uS
Shortage protect recover mode: Off load release.
Contact discharge current:80A
Synopline discharge current:60A
Charging current:60A
balance function:yes
Ampere balance (Current) : 60MA
Current balance accuracy : 4.14-4.24V
3S 25A Li-ion 18650 BMS PCM Battery Protection Board Balance Lipo Module
SKU:
1711
In stock
Over Charge voltage:4.25-4.35v±0.05v Over Discharge voltage: 2.3-3.0v±0.05v Max Working current:25A Max peak current:35-40A Working temperature:-40---+50 Storage Temperature:-40-- +80 Small current:50uA Life cycle:more then 30000 hours Resistance:Less than 100mΩ Short Cut : Protectable,Charge can repair
3S 40A Lithium Li-ion Battery Charger Protection BMS Board Balanced Version
SKU:
2422
In stock
3S 12.6V 40A lithium battery protection board
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 42 * 55 * 3.4mm ( Enhanced Version), 42 * 60 * 3.4mm (Balanced version)
Product weight: 8.8g (enhanced version), 9.8g (balanced version)
Charging voltage: 12.6V - 13.6V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good,
please reduce the load current use)
Continuous charge current (upper limit): 20A
3S 60A Protection Charging Board PCM BMS 18650 Li-ion Lithium Battery for Drill Motor
SKU:
2369
In stock
Charging voltage: 12.6V - 13.6V
Type:enhanced version,balanced version
Model: BMS-60A-3S
Item:Battery Charger Protection Board
Scope of application: Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V
(including 18650, 26650, polymer lithium batteries, no size limit).
Continuous discharge current (upper limit): 60A (If the heat dissipation environment is not good,
please reduce the load current)
Continuous charging current (upper limit): 15A
Enhanced version version: Suitable for electric drills with a starting current of 120A or less and a power of 260W or less.
Balance version: Suitable for electric drills with starting current below 120A and power below 260W, with balanced
charging function.
3S BMS 12V 100A Li-ion protection lithium battery circuit board li-polymer balance
SKU:
2502
In stock
3S BMS 12V 100A Li-ion LMO protection lithium battery circuit board
li-polymer balance charging module
18650 battery charging module For lithium polymer protection board (3.7V)
Single cell battery overcharge protection voltage: 4.21-4.29V
Single cell battery overload protection recovery voltage: 4.14-4.24V
Overload protection delay: 1.5-2. 3S
Single cell battery over discharge protection voltage: 2.72-2.88V
Protection against current overload: 100 A
Over current protection: 100 A
Over discharge protection delay: 0.5-1. 3S
Temperature protect: Yes
Disconnect protect: Yes
Scarcity to protect: Yes
Shortage delay: 100-600 EE. USA
Scarcity Protection Recovery: Yes
Charging current: 60A
The current balance: Yes
Ampere (current): 60 mA
Voltage accuracy: 4.14-4.24V
4S BMS 16.8V 100A Li-ion LMO protection lithium battery circuit board li-polymer balance charging module
SKU:
2503
In stock
4S BMS 16.8V 100A Li-ion LMO protection lithium battery circuit board li-polymer balance charging module
Description:
1. This protection plate is 4S in common use lithium battery protection plate (can be adjusted for How many strings
should be used), the default delivery is 4S ternary lithium.
2. specified chip, stable performance, support disconnect protection, over current protection, over discharge
protection, overload protection, with balance etc.
3 common use for "same port" and "different port", the protection board uses 15 ultra low resistance high power
MOS tubes (8 discharge, 7 charge), in the same port mode can withstand the current of discharge 60A,
charge current 60A; Different modes of current discharge port 80A, charging current 60A.
4. Can be used for LMO. Ternary lithium battery. LCO battery packs (3.7V) etc.
Parameter:
LiMnO protection parameter of lithium polymer (3.6V / 3.7V)
Single cell battery overcharge protection voltage: 4.21-4.29V
Single cell battery overload protection recovery voltage: 4.14-4.24V
Overload protection delay: 1.5-2. 4S
Single cell battery over discharge protection voltage: 2.72-2.88V
Single cell battery over discharge protection recovery voltage: 2.9-3.1V
Overload protection current: 100 a
Protective discharge current: 100 A
Over discharge protection delay: 0.5-1. 4S
Temperature protection: Yes, with temperature control interface.
Disconnect protect: Yes
Scarcity to protect: Yes
Shortage delay: 100-600 EE. USA
Shortage protection recovery mode: load release off.
Contact discharge current: 80 a
Sinopline discharge current: 60 a
Charging current: 60A
Balance function: Yes
Ampere (current): 60 mA
Current Balance Accuracy: 4.14-4.24V
Package includes:
1x 4S BMS 16.8V 100A Li-ion LMO protection lithium battery circuit board