Product Description:
Type: Double Tinned Jumper Wire
Conductor: Tinned Copper
Insulation: PVC
Color: Red
Wire Type: 24AWG
Line Length: 9cm
Connection Type: Welding, approx. 3mm wire stripping on double end.
Characteristic:
Anti-high and low temperature: With excellent corrosion resistance, electrical insulation property
and fire resistance and aging resistance, high pressure resistant, low loss at high frequency,
high insulation resistance, long service life, very soft, convenient to install.
Application:
In the electronics industry, it can be used as temperature compensated conductor, cryogenic
conductor, high temperature heating conductor, aging resistant wire and fire-resistant wire.
In the household electrical industry, it can be used for internal wiring of air-conditioner, microwave
oven, electronic disinfection cabinet, electric rice cooker, electric thermos bottle, electric heater,
electric oven, electric wok, lamp decoration etc device.
Package Includes:
24 grams Red 9CM Double Tinned Jumper Wire Aprox 100pcs
100pcs Double Tinned Jumper Wire Welding Lead Tin Plated Electronic Copper Wire Red 9CM in Pakistan
PKR 70
In stock
کسٹمر کو رقم ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے
SKU:
2805
Categories: Connectors & Terminals, Electronic Components
Double Tinned Jumper Wire Welding Lead Tin Plated
Electronic Copper Wire Red
Type: Double Tinned Jumper Wire
Conductor: Tinned Copper
Insulation: PVC
Color: Red
Wire Type: 24AWG
Line Length: 9cm
Connection Type: Welding, approx. 3mm wire stripping on double end.
On Sale Products
-
Stainless Steel Potato Spiral Cutting Machine
PKR 1,800Original price was: PKR 1,800.PKR 1,650Current price is: PKR 1,650. -
TP101 Digital Thermometer Kitchen Food temperature For Meat Cooking Food Probe
PKR 550Original price was: PKR 550.PKR 520Current price is: PKR 520. -
2 in 1 Headphone Audio Adapter Lightning to 3.5mm Cable Charging Aux Cable for iphone XS Max X 8 7
PKR 1,850Original price was: PKR 1,850.PKR 950Current price is: PKR 950.
Related products
12V 8A Switch Dimmer Brightness Adjustable Controller for DC motor LED Strip Light
SKU:
1189
In stock
PKR 470
2 CHANNEL 5v RELAY Module 2-channel
SKU:
1042
In stock
PKR 350
4 Channel I2C Logic Level Converter IIC Module 5V to 3.3v 4ch
SKU:
1077
In stock
PKR 100
4-Phase Stepper Motor and Driver Board ULN2003 Module Arduino
SKU:
1018
In stock
PKR 350
5V 9V 12V 10A PWM DC Motor Speed Controller LED Dimmer Module Adjustable Speed Regulator
SKU:
1180
In stock
PKR 300
Max voltage: 16V
Minimum voltage: 5V
Continuous current: 10A
Short maximum current: 20A (less than 10 seconds)
Speed control mode: PWM step-less speed regulation, can also be used to adjust the light
Control mode: speed control potentiometer (clockwise clicked open, continue to rotate clockwise from 1% to 99% speed)
Duty cycle: 0%-99% (0% position is the state of the switch off when the potentiometer is most on the left).
When the current is switched on, the 0.002A (long time no need to switch off the governor is no current).
Efficiency: the maximum efficiency is as high as 98%.
Volume: long 3cm (excluding potentiometer), width 2cm, height 1.4cm
DC-DC LM2596 Step-down Adjustable Module CC-CV
SKU:
1022
In stock
PKR 350
Fixed turn the lamp current to 0.1 times the value of the constant current (charge when used to identify whether the battery is full);
2. Increased input reverse polarity protection diode;
3. Using dedicated reference IC, and high-precision sampling resistor, so that the constant current is more stable, (20 degrees to 100 degrees, the constant current 1A, when the temperature drift of less than 1%).Particularly suitable for LED driver
*High-power LED constant current drive
*Lithium battery charger (including ferroelectric)
Digital Oscilloscope DSO138 2.4″ TFT 1Msps + Probe
SKU:
1250
In stock
PKR 6,200
This kits has all for SMD parts pre-soldered. The MCU has been pre-programmed and no re-programming required.
It is partially open-sourced. This opens the possibility for users to add different features or develop new applications on the hardware.
9V DC power supply required. Not included Charger.
For Waveform frozen (HOLD) function available.
Built-in 1KHz/3.3V test signal.
ESP8266 esp-01 remote serial Port WIFI wireless module D185
SKU:
1124
In stock
PKR 340
802.11 b/g/n
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Integrated TR switch, balun, LNA, power amplifier and matching network
Integrated PLLs, regulators, DCXO and power management units
+19.5dBm output power in 802.11b mode
Power down leakage current of <10uA
Integrated low power 32-bit CPU could be used as application processor
HC-05 HC05 Bluetooth JY-MCU 6 Pin Module
SKU:
1069
In stock
PKR 750
L293D Motor Drive Shield for Arduino
SKU:
1051
In stock
PKR 480
Motor Drive Shield L293D for Arduino Duemilanove Mega / UNO
4-channel DC motor drives, stepper motor or 2 while driving two servos, You can mix:
DC motor driver quad and two steering gear
Drive two DC motor and stepper motor all the way and two-way steering gear
Drive two stepper motors and two servos
MB102 Breadboard Power Supply Module 3.3V 5V Bread Board
SKU:
1058
In stock
PKR 180
Brand new & high quality
Breadboard power supply module, compatible with 5 V, 3.3 V
Apply to MB102 breadboard
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V can switch over
Maximum output current: <700 ma
Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5 V
Soil moisture sensor Soil Hygrometer Humidity Detection module
SKU:
1176
In stock
PKR 180
soil humidity module to the environmental humidity is the most sensitive, generally used to detect soil moisture.
module in soil moisture can not reach the setting threshold, DO mouth output high level, when soil moisture more than setting threshold, module D0 output low level;
small plate digital output D0 can be directly connected with the single chip microcomputer, through the single chip microcomputer to detect the high and low level, thus to detect soil moisture;
Description
Product Description:
Type: Double Tinned Jumper Wire
Conductor: Tinned Copper
Insulation: PVC
Color: Red
Wire Type: 24AWG
Line Length: 9cm
Connection Type: Welding, approx. 3mm wire stripping on double end.
Characteristic:
Anti-high and low temperature: With excellent corrosion resistance, electrical insulation property
and fire resistance and aging resistance, high pressure resistant, low loss at high frequency,
high insulation resistance, long service life, very soft, convenient to install.
Application:
In the electronics industry, it can be used as temperature compensated conductor, cryogenic
conductor, high temperature heating conductor, aging resistant wire and fire-resistant wire.
In the household electrical industry, it can be used for internal wiring of air-conditioner, microwave
oven, electronic disinfection cabinet, electric rice cooker, electric thermos bottle, electric heater,
electric oven, electric wok, lamp decoration etc device.
Package Includes:
24 grams Red 9CM Double Tinned Jumper Wire Aprox 100pcs
Reviews (0)
Be the first to review “100pcs Double Tinned Jumper Wire Welding Lead Tin Plated Electronic Copper Wire Red 9CM” Cancel reply
Reviews
There are no reviews yet.