Car Vehicle Bike Tools and Accessories
3S 4S 4A Type-C DC 3.7V 5V Charging Discharge Integrated Step Up Battery Charger Module buy in Pakistan
PKR 290 – PKR 299
کسٹمر کو رقم ادائیگی سے پہلے پارسل کھولنے کی اجازت ہے
| Weight | 0.005 kg |
|---|---|
| Color Family |
3S 4A, 4S 4A |
On Sale Products
Related products
3S 40A Lithium Li-ion Battery Charger Protection BMS Board Balanced Version
SKU:
2422
In stock
3S 12.6V 40A lithium battery protection board
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 42 * 55 * 3.4mm ( Enhanced Version), 42 * 60 * 3.4mm (Balanced version)
Product weight: 8.8g (enhanced version), 9.8g (balanced version)
Charging voltage: 12.6V - 13.6V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good,
please reduce the load current use)
Continuous charge current (upper limit): 20A
2.4A 2.1A QC LED Display Dual USB Micro Type-C Lightning Power Bank Circuit 18650 Lithium Charger Board
SKU:
3091
In stock
20A 3s li-ion lithium battery 18650 charger 12.6V BMS protection board
SKU:
1555
In stock
TP4056 5V 1A 18650 TYPE-C USB lithium Battery Charger Module Charging Board With Protection
SKU:
2963
In stock
TP4056 5V 1A 18650 TYPE-C USB lithium Battery Charger Module Charging Board With Protection
Input voltage: 4.35-6V (recommended voltage 5v)
Charge cut-off voltage: 4.2V +/- 1%
Maximum load current output: 1000 ma
Battery overcharge protection voltage: 4.28V
Battery Overcharge Boost Voltage: 4.00V
Battery discharge protection voltage: 3.0V
Battery discharge termination voltage: 3.2V
Battery: current 3A overcurrent protection
Board size: about 2.5 * 1.65CM
Indicator light: without charging the light not bright, the red light to recharge, it is full of green light.
24V 6S 15a lithium protection board, 6 packs of 18650 PCB BMS, lithium ion battery cell module
SKU:
2656
In stock
24V, 6S, 15a lithium protection board, 6 packs of 18650 PCB BMS, lithium ion battery cell module
Model: 6 string 22V 24V lithium battery protection board
Maximum operating current: Within15A
Charging current: Within 15A
Balanced charge: None
Short circuit protection: Yes
Applicable assembly: Nominal 3.7V Batteries / 6 strings
Dual 2 Double USB Fast Charger Buck Module Input 6V- 30V Single Port 24W Support QC2.0 QC3.0 QC 2.0 3.0 Car Vehicle Board
SKU:
2081
In stock
Dual 2 Double USB Fast Charger Buck Module Input 6V- 30V Single Port 24W Support QC2.0 QC3.0 QC 2.0 3.0 Car Vehicle Board
Dual-port independent output, support protocol: QC2.0, QC3.0, MTK PE1.1 / 2.0, FOR Apple, FS Samsung AFC, FORHuawei FCP, FOR Spreadtrum SFCP
Input voltage: DC 6 ~ 30 v
Output voltage: standard 5v, fit range 3 ~ 12v after fast charging protocol
Output capacity: single-port rated current 2.4A, rated power 24 watts
Protection measures: Output over-voltage protection, limit the output voltage does not exceed 13v (in the case of chip failure); input with a fuse.
Single Cell 18650 Lithium Battery Boost QC Fast Charge QC2.0 QC3.0 Module Board 3.7V 4.2V Convert 5V 9V 12V USB Mobile Phone Quick Charging
SKU:
2080
In stock
Single Cell Lithium Battery Boost Power Module Board 3.7V 4.2V Liter 5V 9V 12V USB Mobile Phone QC Fast Charge QC2.0 QC3.0
Product model: AILAVI-180312
Name: Single-cell lithium battery boost fast charging source module
Main control chip: TPS61088A
Identification chip: FP6601Q
Input voltage: 2.8 ~ 4.5V, very suitable for 3.7V polymer lithium battery
Output voltage: The default is 5V, triggering fast charge after 4.5V ~ 12V according to the protocol.
Input rated current: 8A
Output current: 5V3A, 9V2A, 12V2A. Output current is adaptive.
Output power: up to 24W.
Support Agreement: QC2.0, QC3.0, Huawei FCP, DCP Agreement
Efficiency is up to 93%, with a typical value of 90%.
Module size: 47.5 (length) * 16.5 (width) * 8 (height) mm (including USB)
Module net weight: about 7 grams
The FP6601Q chip integrates the HiSilicon fast charge protocol and Qualcomm QC2.0/3.0USB interface fast charge protocol, which can quickly charge devices that support FCP and QC2.0/3.0 protocols. In addition to supporting the USB BC1.2 standard, it also supports FOR Apple and FOR Samsung devices. The chip can automatically detect whether the currently connected device is a QC2.0/3.0 or FCP device to automatically adjust the voltage.
feature of product:
1. Support FCP voltage and current output protocol.
2. Support Qualcomm QC2.0/3.0 classA 5V, 9V, 12V voltage output.
3. Automatically recognize FCP and QC2.0/3.0 fast charge protocol.
4. Support the protocol equipment of Chinese telecom enterprise YD/T 1591.
The TPS61088 is a high power density, fully integrated boost converter with an 11m? power switch and a 13m? rectifier switch that provides an efficient, small form factor solution for portable systems. With a wide input voltage range of 2.7V to 12V, the TPS61088 supports applications with single or two-cell Li-Ion batteries. The device features 10A switching current capability and is capable of delivering output voltages up to 12.6V.
The TPS61088 uses an adaptive constant off-time peak current control topology to regulate the output voltage. The TPS61088 operates in PWM mode under medium to heavy load conditions. Under light load conditions, the device can select one of the following two modes of operation via the MODE pin. One is a PFM mode that increases efficiency; the other is a forced PWM mode that avoids application problems due to low switching frequency. The switching frequency in PWM mode can be adjusted from 200kHz to 2.2MHz with an external resistor. The TPS61088 also implements a programmable soft start function and an adjustable switching peak current limit. In addition, the device is available with 13.2V output overvoltage protection, cycle-by-cycle overcurrent protection, and thermal shutdown protection.
The TPS61088 is available in a 20-pin 4.50mm ? 3.50mm VQFN package.
4S 40A Li-ion 18650 BMS PCM Battery Protection Board Balance Lipo Module 14.8V 16.8V
SKU:
1967
In stock
4 string 16.8V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Product Size: 46 * 60 * 3.4mm (balanced version)
Product weight: 10.3g (balanced version)
Charging voltage: 16.8V - 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 40A
4S 30A Li-ion Lithium Battery 18650 charger protection board PCB
SKU:
1551
In stock
The protective board can be used as the nominal voltage of 14.4V, 14.8V, 16.8V four series of polymer lithium battery group, four series of 18650 lithium batteries as overcharge and over discharge, short circuit protection. Without the activation function in the power application for high instantaneous current,and in inverter application for avoid false triggering protection.So it will use more convenient.
Note:No part design on the back, can be attached to the heat sink to ensure high current work situation for a long time.
134N3P Circuit Board Power-Bank Module 3.7V/4.2V/5V Protection Board Upgrade version
SKU:
1353
In stock
Power Bank Dual USB Module 5V 1A 2.1A
SKU:
1167
In stock
Tp4056 5V 1A Micro USB 18650 Lithium Dual Protection Battery Charging Module
SKU:
1094
In stock
Description
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.