SS49E HALL EFFECT SENSOR LINEAR SWITCH SOT23 Switch
SKU:
3076
In stock
ST-Link V2 New stlink mini STM8STM32 STLINK programmer with cover
SKU:
2330
In stock
1. Support the full range of STM32 SWD interface debugging, simple interface (including
power supply), 4 line speed, stable work; Interface definition shell directly address!
Don't need to read instructions!
2. Support all series STM8 SWIM download debugging (common development environment such as
IAR, STVD etc.) are supported. Support the software version is as follows:
ST - LINK Utility 2.0 and above
STVD 2 and above
STVP 3.2.3 and above
IAR EWARM V6.20 and above
IAR EWSTM8 V1.30 and above
KEIL RVMDK V4.21 and above
3.Support the firmware upgrade automatically, to ensure that the ST company product
support. When they leave the firmware has been upgraded to the latest V2.J17.S4
STC-3028 Temperature And Humidity Controller AC 220V
SKU:
2474
In stock
STC-3028 Temperature And Humidity Controller AC 220V
Model: STC-3028
Input Voltage: AC110 ~ 220V
Measuring Temperature Range: -20 ? ~ 80 ?
Humidity Measurement Range: 00% RH ~ + 100% RH
Accuracy: ? 1 ?, 0.1% RH
Relay Output Contact Power : 10A / 240VAC
Material: PC + ABS fireproof
Cable length: 1m
Set the start temperature (humidity):
Press the up button once to display the start temperature (humidity). Long press the "up" button
for about 3 seconds, the desired temperature (humidity) can be set by using the up and down keys.
Set the stop temperature (humidity):
Press the "down" button once to display the stop temperature (humidity).
Long press the button for about 3 seconds, and the temperature (humidity) stop number flashes.
The required temperature (humidity) can be set up and down with the keys.
Temperature (humidity) correction:
Press the "up" and "down" buttons at the same time.
Stepper motor Driver A4988 Module
SKU:
1174
In stock
STI3408B S10B 1.2V SOT23-5 1.0A synchronous voltage drop converter
SKU:
3054
In stock
STI3408B S10B S108 1.2V SOT23-5 1.0A synchronous voltage drop converter
FEATURES
High Efficiency: Up to 96%
1.5MHz Constant Frequency Operation
1.2A Output Current
No Schottky Diode Required
2.5V to 6.0V Input Voltage Range
Output Voltage as Low as 0.6V
100% Duty Cycle in Dropout
Low Quiescent Current: 40? A
Slope Compensated Current Mode
Control for Excellent Line and Load
Transient Response
Short Circuit Protection
Thermal Fault Protection
Inrush Current Limit and Soft Start
Input over voltage protection(OVP)
<1? A Shutdown Current
Tiny SOT23-5 Package
STI3508 S35 28V High Efficiency sot23-6 1MHz, 2A Step Up Regulator IC
SKU:
3049
In stock
Integrated 80m? Power MOSFET
2V to 24V Input Voltage
1MHz Fixed Switching Frequency
Internal 4A Switch Current Limit
Adjustable Output Voltage
nternal Compensation
Up to 28V Output Voltage
Automatic Pulse Frequency Modulation
Mode at Light Loads
up to 97% Efficiency
Available in a 6-Pin SOT23-6 Package
STM32F030F4P6 ARM CORTEX-M0 Core Minimum System Dev Board for Arduino
SKU:
2629
In stock
STM32F030F4P6 ARM CORTEX-M0 Core Minimum System Dev Board for Arduino
Model: STM32F030F4P6
16K flash memory, 4K SRAM.
The target MCU is STM32F030F4P6.
This board is a STM32F030F4P6 Minimum System Board (Cortex-M0)
It's a ARM 32-bit Cortex-M0 CPU, frequency up to 48 MHz, high-speed embedded memories.
Integrating micor USB power supply interface.
ISP/SWD programming/debugging interface, boot mode selection and more feature rich device.
Color: blue
STM8S103F3P6 system board STM8S STM8 development board minimum core board
SKU:
2069
In stock
The development board using MicroUSB cable supply, compatible with smart phone lines, data lines is simple and easy to get, but not USB MINI line-powered, USB MINI line is not easy to find, has been gradually phased out. Other manufacturers of products are used in MINI-USB port, this is not applicable for customers.
Low price, user-friendly design, a full set of data, allowing you to save money, save time, effort, worry!
STM8S core board of the main features:
1. Use STM8S103F3P6 as the master IC.
2. You can use 2.54 pin on the board or power supply pad, the pad when using power supply, input voltage range 4.5V-15V, can output to the outside through pin 3.3V!
Note: 5V pin?s voltage is the input voltage of the module.
3. leads to all pins, the pins next to the pin marked the label, with a reset button, power LED, and the program demonstrates LED, small but perfectly formed.
4. Support SWIM debug mode.
1. The core board schematics (PDF format) and tested source. Burned into the test program, LED flashes, allowing you to detect the core board is working properly.
2. Provide at IAR and STVD two development environments register operation and routine operation of the library functions. Timer routine, UART transmit routine, UART receive routines, clock switching routines, AD routines and so on.
3.STM8 Applications.
4.STM8 package library.
5.IAR development environment, STVP programming software.
STR G5653 Power Switching Regulator
SKU:
3166
In stock
STR-G5653 Power Switching Regulator DESCRIPTION STR-G 5653 is a hybrid IC with a built-in MOS FET and control IC, designed for a primary side regulation. MANY PROTECTION FUNCTIONS OVP(over voltage protection circuit) OCP(over current protection circuit) TSD(Thermal shutdown circuit) BLOCK DIAGRAM PIN CONFIGURATION www.DataSheet4U.com PIN 1 2 3 4 5 SYMBOL D S GND VIN O.C.P / F.B Description Drain Terminal Source Terminal Ground Terminal Functions MOS FET DRAIN MOS FET SOURCE GROUND Power supply Terminal Input of power supply
STR S6708 OFF LINE SWITCHING REGULATORS
SKU:
3165
In stock
STR-S6708 OFF-LINE SWITCHING REGULATORS – WITH BIPOLAR SWITCHING TRANSISTOR COLLECTOR 1 COMMON 2 FAULT The STR-S6707, STR-S6708, and STR-S6709 are specifically designed to meet the requirement for increased integration and reliability in off-line quasi-resonant flyback converters. These devices incorporate the primary control and proportional drive circuit with a thirdgeneration high-voltage bipolar switching transistor. Crucial system parameters such as maximum ON time and OFF time are fixed during manufacture.