CP2102 6Pin Module USB 2.0 To TTL Module Serial Converter

1.PCB size: 26.5mm * 15.6mm

2.PCB Color: Black

3. Weight: 4g

4. Using the new chip CP2102

5. with resettable fuse. In the event of accidental short-circuit can effectively protect your device and computer USB port to download

6. With three LEDs: power indicator, the indicator data reception, data transmission indicator, work status at a glance

7. 3.3V and 5V with two power output

8. all the useful lead pins

9. with reset signal output can be directly Pro mini and other Ard uino board to download!

10. Compatible Operating Systems:

  -Windows 98 / Me / 2000 / XP / 7

  -MAC OS-9

  -MAC OS

  -X-Windows CE

  -Linux 2.40 or later

1. Test a good CP2102 module (single anti-static bag)

2. Data A (to download)

   CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM, and asynchronous serial data bus (UART), to support a full-featured modem signal without any external USB devices. Similar to other works CP2102 USB-UART switching circuit by the driver into the PC’s USB port virtual COM port expansion to achieve the purpose.

1. embedded USB transceiver, no external circuit device

2. containing clock circuit, no external circuit device

3. contains power-on reset circuit

The on-chip voltage regulator within the 3.3V output

5. Meet the USB2.0 specification requirements

6.SUSPEND pins support USB suspend state

7. asynchronous serial data bus compatible with all handshakes and modulation controller interface signals

8. Support data format is 8 data bits, 1 stop bit and the parity bit

9. connotation 512 byte receive buffer and 512 byte transmit buffer

10. Supports hardware or X-ON / X-OFF Handshake

Pacage : 1 PC DP2102 Module