Liitokala Lii-500 NiMH Battery Charger 18650 26650 AA AAA

Function 2:

Press and hold the MODE key for 3 seconds to switch between CHARGE (rechargeable), FAST TEST, and NOR TEST (capacity) modes. Within 8 seconds, press the corresponding function button to change detection, current, independence, capacity, etc. After 8 seconds, the selected function begins working. During operation, press (1234) to check reference data such as current (mA), capacity (mAh), voltage (V), time (h), and internal resistance (mR).

Function 3:

When the charger plug charger all LCD screen instantly bright, if the battery is not in the will show the Null, if it is a bad battery into will also display Null;

Function 4:

Upon connecting the charger to the battery, the charger measures the battery’s internal resistance in 3 seconds and automatically enters CHARGE mode. The default charging current is 500 mA. Within 8 seconds, you can select a charging current of 300 mA, 500 mA, 700 mA, or 1000 mA using the CURREN key. The system locks your chosen current after 8 seconds. If not set within 8 seconds, the system defaults to 500 mA. Current and other functions cannot be changed afterwards. To change, long-press the mode key

Function 5:

In the charging mode (CHARGE), you have 8 seconds to change the independence or select a different charging current. You can also choose to mix different batteries. There’s a simple light indicator. Within 8 seconds, you can press the corresponding 1234 battery key. Pressing the mode key again will change the settings. If you press the current key, it will change the current detection function, independence, battery type, and capacity. After 8 seconds, the system enters the working state, pay attention to choose the charging current according to battery capacity size, if you don’t need fast charging, suggest using 500 ma charge, this is the most safe;

The battery is first discharged, and then the battery’s capacity is recorded and inspected during charging. This product is designed to detect battery capacity and has two discharge modes. When you select a charging current of 300 mA or 500 mA, the system automatically defaults to a discharge current of 250 mA. When you select a charging current of 700 mA or 1000 mA, the system automatically defaults to a discharge current of 500 mA. Please note that these settings are important for the accurate detection of battery capacity.

NOR TEST for Liitokala Lii-500 charger:

There are different modes for Liitokala Lii-500 charger

Mode 1:

NOR TEST mode: which is the batteries, the first to record the battery discharge and discharge capacity to TEST battery capacity, after the battery is full of automatically; Refer to table 2 capacity detection process

Mode 2:

When the charger into the battery after turning on the power supply, light according to 8 seconds (MODE key MODE), selected NOR TEST MODE, long press MODE key under any state 2 seconds, can enter NOR TEST MODE;

Mode 3:

Within 8 seconds, use the CURREN key to select a current of 300 mA, 500 mA, or 700 mA. The system locks in your chosen current after 8 seconds. If no current is set within 8 seconds, the system defaults to a charging current of 500 mA. At this time, the system automatically selects a discharge current of 250 mA. If you select a charging current of 700 mA or 1000 mA within 8 seconds, the system automatically selects a discharge current of 500 mA.

Mode 4:

When the battery is fully charged, the system automatically begins discharging at the default current, which is related to the charging current. The system records the discharge data to determine the battery capacity.
Once the screen appears, it signifies the end of the capacity detection mode. The parameters displayed on the LCD at this time are the reference values for the actual capacity of the battery.

Mode 5:

After the capacity to detect patterns, the charger in before the current selected parameters for the battery again, until it is full. Five, the USB 5 v output. USB only move as 5 v output, the output current is 1000 ma, connect the power supply the USB output is invalid. When the battery into the slot of the output USB / 5 v in awake, at this time can be on the 5 v power electronics. Products 4 battery slot, an arbitrary slot are available for USB output, suggested that both slot in the battery. USB 5 V output to only work in 3.7 V lithium battery, nickel metal hydride booster is invalid.